Flood damage restoration service – Allied Gardens

Property owners in Allied Gardens experience flood damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

When a flood, storm, or burst pipe causes water to seep into a home or building water damage is most of the time. Sometimes the damage is apparent and evident. Other times, it’s subtle or under-reported.

Water damage remediation is much more complicated than just drying the interior. With the most modern techniques for water damage remediation, often restorers like Critical Control can mitigate damage that, in the past, would have required complete structural replacement, that is to say, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are readily available – Call for a Professional

Many times, homeowners and builders attempt to repair water damage by using DIY methods that can be found on the internet. This is inadvisable. There are guidelines to deal with water damage and they call on the equipment and expertise of experts. These guidelines are found in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is created because of the need for professional standards in cases involving water damage to buildings and homes and the risks they create.

Critical Control, a restoration firm, is able to use IICRC guidelines to determine the extent and type of the project’s damages.

There are a lot of reasons that water damage professionals must adhere to these guidelines. In certain circumstances it is necessary to employ an Indoor Environmental Professional (IEP) is essential. An IEP is someone with the knowledge and training to evaluate an area for contamination, take samples, run lab tests and provide us with advice regarding the nature of the water damage.

This is particularly important in situations where the occupants of the building could be at risk, there are a chance of adverse health effects, the occupants are required to determine the suspected contaminants, or some other reason that there might be concerns about contamination.

Water damages caused according to categories and classes


Restoration projects for water damage are classified into two categories according to the extent of the infiltration of water is.

The category is based on how polluted the water that entered the structure has been. The first category is water that is clean like the sink or tub, or burst water supply.

Category 2 water contains significant levels of contaminants and can cause illness when it is consumed or in contact with. This could include waters that are not readily apparent as a danger such as the effluent from washing machines, or the overflows from toilets.

The water in Category 3 is highly polluted, meaning it could have pathogenic, toxigenic, or other harmful agents in it. This could be due to leaks in toilet traps, and the flooding of rivers and streams. This water can include heavy metals, pesticides or harmful substances.


You can also utilize the IICRC’s classes to determine how much water has penetrated your property. This system basically sets guidelines for the level of saturation of the building or home.

Class 1 means the least amount of absorption and the amount of water. It is the case when water comes in contact with about 5percent or less of building materials that absorb water. This is typically the case that the majority of the building substances affected by water have low in evaporation, which means that they aren’t able to absorb and hold water. Concrete, plaster, masonry, and wood that has been finished/coated are some of the examples.

Class 2 indicates that there is substantial absorption of water and intrusion. It means that anywhere between 5% and 40% of the ceiling, floor, and wall are made of materials with low-evaporation, such as plaster, concrete, wood, or bricks and mortar.

Class 3 means that about 40% or more of the wall, floor and ceiling surfaces are porous such as carpet, insulation, fiberboard etc. Other materials, such as concrete and plaster that do not absorb water haven’t been adversely affected.

The water has been absorbed into materials such as concrete, plaster, and wood, which are classified as Class 4. This will require more time to dry and special drying techniques.

How to dry a water damaged Building or House


Three ways to remove water from buildings are physical extraction, dehumidification, and evaporate. The removal of liquid water is at about 500 times more efficient than simply making do with dehumidifiers and air movers. The quicker the structure is dried more efficiently. Both extraction and dehumidification methods will be affected by the amount of much material is being removed.

Water damage professionals utilize a variety of extraction techniques. Some of our tools include tools for subsurface extraction, wands, self-propelled tools, and vacuum squeezers.

Forced Evaporation

After the water is removed, the remaining moisture is dried using high-velocity airmovers.

Submerged objects absorb moisture and water when it’s moistened. The substance becomes damp or wet as a result.

Saturation is defined as the point where it becomes unachievable for the air to contain any moisture. The greater the humidity, the more close the air is to saturation.

In the evaporation stage, water molecules jump from liquid state to gaseous state. This is known as evaporation.

This signifies that the object has stopped absorbing water from the atmosphere. This is called the saturation point. Once the saturation point is reached drying begins.

In the evaporation stage the highly efficient air movers dry the object from two sides. They generate a large airflow across the surface of the object that is controlled by a filter that covers the entire area of the object.

An air mover can transport between 10 and 20 percent more air than an ordinary fan, or a standard fan used in the home.

The item is dried using air movers approximately 10 times faster than in natural conditions where no air mover was used.

Airflows that are high-velocity leaves the surface dry and absorbs moisture drawn out by the airflow.

Use heat to assist the drying process.

The element of heat is crucial to the success of any water damage restoration task. To dry out materials which have been affected by water, we use a number of different types of heaters.

Electric Heaters: These heaters may be used for drying jobs that require multiple heating sources. It is possible to run several heaters at once because of their many Wattages.

Electric heat is also able to be reduced or turned off while the job is in process, without affecting your other heaters. This means that you could turn one heater down while increasing the power of another to maximize efficiency and reduce your expenses for energy.

Electric heaters are a common feature in restoration work since they emit virtually zero emissions and consume very little water. However, the only drawback is they take longer to heat up, requiring longer drying time. process in general.

Hydronic Bioler (TES) Hydronic Bioler (TES), These boilers heat up quickly and release very little CO2. They can run on propane or natural gas.

Hydronic boilers are different from electric heating in that they don’t utilize forced-air for distribution of heat, so it can be difficult to evenly heat an space with these kinds of heaters. They also operate at an lower temperature, making them perfect for drying tasks that require ceilings and walls to be left unattended.

They are also commonly used in situations where there is no electricity to power electric heaters. Because they are extremely efficient at producing radiant heat, they can easily keep your drying space warm even without an electric power source.


To keep buildings and homes dry which have suffered damage due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of water in a damp structure which has been badly affected by water damage each 24 hours.

The home dehumidifier can extract water from the air the same way it does an LGR Refrigerant Dehumidifier. It can also get rid of up to 99 percent of airborne mold spores by removing condensation.

Repairing Hardwood Floor Water Damage

It is important to remove the hardwood floors that have been damaged by water so that repairs can be completed from the subflooring up.

The subflooring has to be taken off and repaired before. Next, the hardwood boards damaged need to be sanded or replaced. Once these repairs are complete then the entire floor must be sanded, refinished and polished to ensure a uniform appearance.

Carpets are prone to water damage

Floods can cause serious damages to your house and make it costly and difficult to repair. Even if water is removed from the affected region immediately, there’s an opportunity that you’ll need to replace the flooring in the future.

It’s devastating to find out that your home isn’t in top condition after you have spent so much time and money to repair it.

In this regard, it is important to assess the extent of damages as soon as you can. The first step is to determine if the damaged area needs to be replaced. It is possible to clean the carpet and then use it once dry. This can eliminate worries about mildew growth or lingering smells.

Salvaging Carpet After a Water Damage Event

If the damage from water has been very severe there is a chance that you will have noticeable stains on your carpeting. In some cases, you may need to replace your flooring in order to eliminate the stain. A strong, lingering odor may also be the reason to get your carpet replaced. If this is the case, then you will likely need to replace both the padding and carpet.

Next, determine if your flooring can be dried professionally before you decide whether to replace it. Professionals will be able to aid you in determining the severity of the damages were. Our company will assess the carpet and decide whether it’s worth replacing or re-usable. Remember that some of the techniques used for drying can also harm the carpet further even if it’s already in poor condition.

Many factors determine the need for padding or carpet is a good idea to replace it.

Do your carpets get professionally cleaned, dried and cleaned?

If the padding beneath your carpet is also damaged, this can affect the length of time your carpet can last. Although your carpet might have been dried immediately, the possibility of mold growth is present if the padding under it is not dried as well.

The best way to be sure that your carpeting is properly cleaned and disinfected following flooding is to employ an expert carpet cleaning service. After the company completes their task, you’ll be able to make a more informed decision regarding the condition of your carpet and determine whether or not to change it.

Drywall damaged by water

The drywall repair procedure varies based on the extent of damage. Repairing water damage is as simple as removing an area of drywall cleaning it, after that, replacing it.

The opposite of this is that serious damage could need to be repaired completely, including walls studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to eliminate. In the majority of cases the drywall needs to be replaced. We employ moisture testing instruments to determine the amount of moisture. This allows us to pinpoint damaged areas and limit the cost to the only damaged ones.

Water can cause structural damage as well, as it causes the material to expand or shrink. It is easier to break wood if it has been moistened with water. If the water is left to sit for a prolonged time, it could cause an extensive amount of rot on the wood, which could make it break easily.


This issue can be prevented by building owners and homeowners taking immediate action to fix the structural damage caused by moisture-related issues that affect their property after flooding or other damages caused by water.

Water Damage in the Foundation

The damage caused by water to a house’s foundation can occur for many reasons. Although not all water problems cause structural damage, it is important to fix foundational issues as soon as possible in order to avoid any further structural damage.

Water damage to the foundation can result in a myriad of issues based on the way it’s treated. If the damage is not treated promptly, it could result in serious structural damages.


Roof Water Damage

Damage to the roof can be caused by natural catastrophes as well as foundation water damage. Roof damage can cause roof leaks, and can also cause damage to the foundations of a house or house.

Leaking roofs are costly and may have significant drawbacks. The roof’s leaks could lead to mold growth and can be fatal. A leaking roof may also harm the roof truss system, which can cause structural damage to the roof.

Leaks from the ceiling could cause your rafters’ to degrade and become soft if you don’t address them immediately. Damage to your roof can result from electrical issues which could lead to the possibility of an electric fire. All of these are excellent reasons to get roof water damage repaired swiftly following a flood or other damage that is unexpected.

HVAC Water Damage

If your HVAC system begins to fail or brand new equipment becomes inoperable, it can result in structural damage to your house. Without HVAC it is exposing the inside of your house or business to all kinds of problems. Mold growth can lead to severe health issues.

Damage to the Pipe Water

Water damage to pipes is typically caused due to a pipe burst within your home. When you’ve discovered that there’s been an issue, it is important for you to contact a professional to stop the water and ensure it doesn’t cause structural damage.

A ruptured pipe can result in severe damage. When your pipes break and water enters your home, causing extensive damage , and may require water damage repair – a process that can cause structural damage.

If you spot broken pipe water damage stop the supply of water.

What is the cost of restoring water damage?

Water damage restoration cost per square foot

Depending on the square foot the repairs and cleanup expenses differ. National Flood Services has the below pricing breakdown for each square foot:

Can Water Damage be covered By Homeowner’s Insurance?

If the cause was sudden and unintentional, homeowners insurance policies typically cover the damage. The Insurance Information Institute states that homeowners insurance can provide for the repair or replacement of broken windows but not for damages caused by negligence.

Neglect can be described as damage to an object or surface that is the result of the weather, lack of maintenance or general wear and tear. According to the US-based Insurance Information Institute, homeowners insurance does not cover damage due to neglect.

If the water damage resulted from flooding, the incident is not covered under the homeowners insurance. Instead, a flood insurance policy is mandatory. In certain areas, flood policies are required by mortgage companies. Flooding can be caused by storms, flooding ground or overflowing bodies of water, or overflowing or surging bodies like streams, lakes, rivers and oceans.