Water damage remediation – Bartolo Square South

Homeowners in Bartolo Square South get hit with burst pipe damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water gets into a structure or home through a storm, flood or ruptured pipe. Sometimes, the damage is obvious and obvious, sometimes it’s subtle or even hidden.

It is more complicated than simply drying the interior to repair water damage. Modern methods for water damage restoration Restoration companies like Critical Control can mitigate damage which would in the past would have required complete reconstruction of the structure, or in terms of demolition and rebuild.

Water Damage Restoration Guidelines are Available – Call a Professional

A lot of times, property or home owners try to tackle water damage using DIY solutions found on the internet. This isn’t a good idea. Water damage can be managed according to established guidelines. These guidelines require the skills and tools of experts. The guidelines are set forth in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the necessity of professional standardisation of situations that involve water damage to homes and buildings and the dangers they can pose.

Critical Control, a restoration company, can use the IICRC guidelines to assess the type and extent of the damage each project has sustained.

These guidelines are crucial for water damage professionals. In certain circumstances, an Indoor Environmental Professional (IEP) is essential. An IEP is someone who has the expertise and knowledge to assess a site for contamination and take samples, conduct lab tests and offer us suggestions on the nature of the water damage.

This is especially important when the building’s occupants might be at risk, there is a likelihood of adverse health consequences, or the occupants have a desire to know the suspected contaminants, or some other reason for concern over contamination.

Water destruction caused through categorizes and classes


Water damage restoration projects are classified according to category and class depending mostly on the severity of the flooding of water.

The class is based on how contaminated the water that enters the structure has been. Category 1 implies that the water originates from a clean source such as burst water supply, or tub or sink.

Category 2 water has the highest levels of contaminants. It can cause illness when it is consumed or in contact with. It could include sources that might not appear to be an issue, like the discharges from washing machines, or toilet overflows.

Category 3 water can be considered to be highly contaminated. It may contain pathogenic, toxic, or any other dangerous substances. This usually means contamination by sewage, toilet backflows after the toilet trap or a flood of seawater from rivers and streams, or any other source of water that comes from the building exterior. The water could contain pesticides, heavy metallics or other toxic substances.


We can also use the IICRC’s classes to determine just how much water has gotten into your property. This is basically setting guidelines for the saturation of the building or home.

The lowest amount of water absorption and the greatest amount of water is categorized as Class 1. It is the case when water is in contact with less than 5% of construction materials which absorb water. This is because the majority of substances affected by water won’t hold or absorb water. Concrete, finished/coated wood, masonry or plaster.

Class 2 refers to absorption of water and intrusion. It means that anywhere between 5 and 40% of the ceiling, floor, and wall are made of materials with low-evaporation, such as plaster, concrete, wood, or masonry.

Class 3 is the term used to describe 40 percent or more of flooring, walls, and ceiling materials are porous like carpet, insulation, fiberboard and so on. and also where other materials that do not take in a lot of water, such as concrete or cement have not been negatively affected.

Water has been absorbed into materials like concrete as well as wood, plaster, and even wood that are classified as Class 4. This means that it requires longer drying times and special drying techniques.

How do you dry a water damaged Building or Home Building Works


Three ways to remove water from buildings are physical extraction, dehumidification and evaporation. Eliminating liquid water is, at a minimum, 500 times more effective than dehumidifiers and airmovers. The quicker the structure dries the more efficient. Both extraction and dehumidification methods will be affected by the amount of much of the material is extracted.

Water damage professionals utilize a variety of extraction techniques. We employ a range of equipment, such as subsurface extraction tools as well as self-propelled tools.

Forced Evaporation

Once all water is removed, any remaining moisture is then dried by high-speed airmovers.

Submerged objects absorb water and moisture once it is moistened. The material becomes damp or wet due to this.

Saturation is the time at which it becomes impossible for air to hold any moisture. Higher humidity means that the air is more close to saturation.

The evaporation stage is the time the moment when water molecules shift from a liquid state to a gaseous form. This is known as evaporation.

In other words it is no longer absorbs additional moisture from the atmosphere. This is referred to as the saturation point. Once the saturation point is reached drying begins.

High-efficiency air movers dry the object in two areas during the evaporation phase. They generate strong airflow that is controlled by a filter system.

Air mover can move 10 to 20 times more air than a fan , or an ordinary household fan.

Air movers dry objects around 10 times faster than the natural environment, in which there isn’t any air mover.

Airflows with high velocity removes the moisture from the surface and absorbs the water that is drawn out by airflow.

Using Heat To Assist the Drying Process

Heating is a crucial element of any restoration project. To dry out materials that have been affected by water, we employ various kinds of heaters.

Electric Heaters: These heaters may be used to dry jobs that require multiple heating sources. This is due to the fact that they come in a variety of wattages, allowing you to run multiple heaters simultaneously.

Electric heat can also be capable of being reduced or turned off during the process, but without impacting other heaters. This means that you could reduce one heater while increasing the power of the other to increase efficiency and lower energy costs.

Because they emit virtually no emissions and require very little water They are popular for restoration projects. They take longer to warm up and need longer drying time.

Hydronic Bioler (TES) Hydronic Bioler (TES), The boilers quickly heat up and emit very little carbon dioxide. They typically operate using propane or natural gas.

Hydronic boilers differ from electric heating as they don’t make use of forced-air heat to disperse heat. This makes it difficult to distribute heat evenly over large areas with these heaters. They also run at a lower temperature, making ideal for drying projects which require ceilings and walls to remain in place.

Hydronic boilers are often used in situations where there is no electrical power to run electric heaters. They can generate radiant heat and keep your drying area warm without the requirement of an electric source.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to help dry out buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can draw 170 pints of water from damp structures which have suffered extensive water damage within 24 hours.

In addition to removing water out of the air, like an LGR Refrigerant Dehumidifier does, the home dehumidifier will also eliminate as much as 99% of airborne mold spores in the air by eliminating condensation.

Fixing Wood Floor Water Damage

It is crucial to get rid of water damaged hardwood floors to allow repairs to be done starting from the subflooring.

The damaged subflooring first needs to be taken off and fixed. The hardwood floors damaged need to be sanded or replaced. To ensure a uniform appearance, all floors should be sanded, then repaired after these repairs are completed.

Carpets are vulnerable to water damage

If you have been unfortunate enough to have flooding in your house it could be a stressful and costly experience. Even if water is taken away from the affected region immediately, there’s the possibility that you’ll have to eventually replace the flooring.

After spending time and money restoring your home back to its pre-flood condition, it would be devastating to find that the end result leaves an unsatisfactory impression.

It is crucial to determine the extent of damage as soon as you can. The first step is determine if the affected part requires replacement. There is a good chance that the carpet will be maintained and cleaned after drying and the cleaning process can help to eliminate concerns regarding the growth of mildew and persistent odors.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting if the water damage was very extensive. In some instances the only option to get rid of these stains is to replace the flooring. A strong, lingering odor may also be the reason to change your carpet. If you find this to be the case then you may have to replace your padding and carpet.

Check to see if the floor can be dried professionally before you decide whether to replace it. Professionals will help you determine how serious the damages were. Our team will evaluate the carpet and decide whether it is best to replace it or salvageable. If your carpet is in poor shape, some drying techniques can further damage it.

A variety of factors can determine the need for padding or carpet should be replaced.

Can your carpets be dried or cleaned professionally?

If the padding underneath your carpet is also damaged, it could affect the time that your carpet can last. Although your carpet might have been dried immediately but the chance of mildew development is present if the padding under it has not dried as well.

Professional carpet cleaning company is the best way to make sure your carpeting is dry and clean after the flood. After the job is completed you’ll be able to make an informed decision on the state of your carpeting. It is also possible to decide whether you want to replace it.

Drywall that has been damaged by water

The drywall repair procedure varies according to the extent of the damage. Water damage repair can be as easy as removing the drywall section, cleaning it, and after that, replacing it.

The other side is that major damage could require whole-wall replacement including walls studs and fiberglass insulation.

Mold spores can be found in water damaged drywall that is hard to get rid of. In the majority of cases the drywall will need to be replaced. We utilize moisture testing tools that allow us to determine how large and where the humidity has gotten. This allows us to identify damaged areas and limit the cost to only the areas that are damaged.

Water can cause structural damage as well, because it causes the wood to expand or shrink. When the wood is saturated by water, it becomes much easier to break. The wood may become brittle if it is allowed to dry in water for too long.


To avoid this problem, it’s crucial for homeowners and building owners to take care of structural damage caused by water-related issues with their home immediately following the water or flood event.

Water Damage in the Foundation

Damage to a home’s foundation can happen due to a number of reasons. While not all water issues can lead to structural damage, it’s crucial to address foundation issues as quickly as is possible to avoid future structural damage.

Water damage to the foundation can result in a myriad of issues based on the way it’s dealt with. It could cause serious structural damage if not taken care of promptly.


Roof Water Damage

Roof water damage can also be caused by natural catastrophes, just like foundation water damage. Roof damage can cause roof leaks as well as damage the foundation of a house or the foundation of a home.

Roof leaks can be very costly and can have significant drawbacks. Roof leaks can result in the growth of mold, which can prove fatal. Leaks in the roof may cause damages to the roof truss.

Leaks in the ceiling can cause your rafters to decay and soften if you do not deal with them right away. Water damage to the roof could result from electrical issues, which can lead to an electrical fire. All of these are excellent reasons to have roof water damage repaired quickly following a flood or other unexpected damage.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system fails or is defective equipment is installed. Your home and business at risk in the absence of HVAC. The growth of mold can lead to a number of serious health issues.

Damage to the Pipe Water

Damage to pipes typically caused due to a pipe burst within your home. If you’ve determined there’s been a leak, it’s important to seek out professional assistance to stop the leak and make sure it doesn’t cause structural damage.

Pipes that burst can cause a number of damages. If your pipes fail they can let water into your home, creating extensive damages and necessitating repairs for water damage – which can result in structural damage.

Turn off the water supply and then call an expert IICRC-certified specialist at a water restoration firm such as Critical Control as soon as you detect broken pipe water damage.

What is the cost of cleaning up water damages?

Water damage restoration cost per square foot

Based on the square feet the water damage repair and cleanup costs differ. National Flood Services has the following pricing breakdown per square foot.

Are water damage covered By the Homeowner’s Insurance?

If the cause of the damage was unintentional and sudden, homeowners insurance policies typically cover the damage. The Insurance Information Institute states that homeowners insurance can cover the repair or replacement of damaged windows but not for damages due to negligence.

Neglect can be described as damage to a surface or object that results from exposure, inadequate maintenance, or general wear and tear. The Insurance Information Institute in the United States declares that homeowners insurance does not cover the damage caused by negligence.

If the water damage resulted from an event that is a flood, it would not be covered by homeowner’s insurance. A flood policy would be mandatory. In some areas, flood policies are required by mortgage lenders. Flooding can happen as a result of flooding, over-saturated ground, flooding or overflowing bodies of water, such as lakes, rivers, ponds oceans, streams when combined with strong winds.