Water damage restoration service – Bay Point

Property owners in Bay Point suffer water damage regularly. Whether you’ve experienced a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

The most common cause of water damage is when water seeps into a building or residence by way of a flood, storm, or burst pipes. Sometimes the damage is evident and apparent. Other times, it’s more subtle or unreported.

It is more complicated than simply drying the interior to fix water damage. Modern methods for water damage remediation, such as Critical Control, can often mitigate damage that would otherwise need a total structural replacement.

Water Damage Restoration Guidelines are readily available for your reference. Call for a Professional

Many times, building or home owners attempt to address water damage by using DIY solutions found online. This isn’t a good idea. Water damage can be controlled by following established guidelines. These guidelines demand the knowledge and skills of professionals. The guidelines are set forth in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is necessary to ensure professional standardisation of instances involving water damage to houses or buildings, and the risk associated with it.

Critical Control, a restoration firm, is able to use IICRC guidelines to assess the type and extent of each project’s damage.

These guidelines are important for professionals who deal with water damage. In some situations it is necessary to employ an Indoor Environmental Professional (IEP) is required. An IEP is a professional who has the experience and knowledge to examine a site for contamination and collect samples, conduct lab tests, and then advise us on the category of water damage.

This is crucial when the building’s occupants might be at risk, are a chance of adverse health effects, the occupants are required to determine the contaminants that are suspected or any other reason to raise concern over contamination.

Categories and classes of Water Damage


Water damage restoration projects are classified into categories and class depending mostly on the extent of the flood.

The water entering the structure was classified based on the degree of contamination. The category 1 indicates that the water originates from a clean source such as a burst water supply or even a sink or tub.

Category 2 water is characterized by the highest levels of contaminants. It could cause illness if it is inhaled or touched. It could include sources that are not usually considered to be an issue, like the discharges from washing machines, or overflows from toilets.

Water in the category 3 is severely polluted, meaning it could contain toxic, pathogenic or other harmful substances within it. Usually this means contamination from sewage, toilet backflows after the trap for toilets or a flood of seawater from streams and rivers, or any other water arising from the building exterior. This water can be contaminated by pesticides, heavy metals or harmful substances.


You can also utilize the IICRC’s courses to determine how much water has penetrated your property. This is basically setting guidelines for the level of saturation of the building or home.

The lowest level of absorption by water and the greatest amount of water is categorized as Class 1. This is when the water comes in contact with about 5percent or less of building materials that absorb water. This is the situation where most of the materials affected by water are low in evaporation, which means that they aren’t able to absorb and hold in water. Concrete or plaster, masonry and wood that has been finished/coated are some of the examples.

Class 2 refers to water absorption and intrusion. It means that anywhere between 5% to 40% of the ceiling, floor, and wall are made of materials with low-evaporation, such as wood, concrete or masonry.

Class 3 is the term used to describe 40% or more of the wall, floor, and ceiling materials are porous like fiberboard, insulation, carpet and so on. and also where other materials that don’t absorb much water such as plaster or concrete have not been adversely affected.

Class 4 means that water is bound in materials that do not easily absorb water as concrete, wood, and bricks and mortar. This requires more drying time and special drying techniques.

How to Dry a Water Damaged Building or Home Building Works


Physical extraction, dehumidification and evaporation are the three main methods to remove water from a building. Removal of liquid water is at about 500 times more efficient than simply putting up with dehumidifiers and air movers. The quicker the structure is dried the more effective. The amount of stuff that needs to be extracted will affect both extraction and dehumidification techniques.

Professionals dealing with water damage use a variety techniques. We use a variety of tools including subsurface extraction tools as well as self-propelled tools.

Forcible Evaporation

The remaining moisture is then dried using high-speed air movers once as much water as has been removed.

A submerged object absorbs water and moisture once it’s wet. As a result, the material becomes dampened or wet.

The degree of saturation is referred to as the point where it becomes impossible to contain any more moisture. The greater the humidity, the closer the air is to being saturated.

The evaporation process occurs the moment when water molecules shift from the state of liquid to a gaseous state. This is called the process of evaporation.

In another way, the object will no longer absorb additional moisture from the atmosphere. This is called the saturation point. Once saturation is reached, drying will begin.

In the evaporation phase high-efficiency air mover dry the object from two sides. They produce strong airflow that is controlled by a filtering system.

Air mover can move 10 to 20 times more air than a fan , or the typical household fan.

The item is dried using airmovers around 10 times faster that in natural conditions in which no air mover was employed.

Airflows with high velocity removes the moisture from the surface and absorbs moisture that is drawn out by air movement.

Use heat to assist the drying process.

Heat is an important component of any water damage restoration task. We use a variety of heaters to dry the materials that have been damaged by water.

Electric Heaters: Electric heaters are great to dry jobs that require the use of various heating sources. This is due to the fact that they are available in several different power levels, which allows you to operate multiple heaters at once.

It is also possible to turn off or turn off the electric heater as the work is done, without affecting other heaters. This means you can turn one heater down while increasing the power of the other to increase efficiency and lower expenses for energy.

Electric heaters are a common feature in restoration jobs since they emit virtually no emissions and use only a small amount of water. However, the only drawback is that they take longer to get hot, which requires longer drying time. process in general.

Hydronic Bioler (TES): Hydronic boilers are also very efficient at heating up quickly, while still producing very little emissions. They are typically run with propane or natural gas.

Hydronic boilers differ from electric heaters because they don’t use forced-air heat to spread heat. This can make it difficult to distribute heat evenly over large areas with these heaters. They can also be used to dry jobs that do not require ceilings or walls to be able to stand in the same place.

Hydronic boilers are also often used when there is no electricity to power electric heaters. They are capable of producing radiant heat, and they can keep your drying area warm without the requirement of electricity.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to dry buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can extract 170 pints water from damp structures which have suffered severe water damage within 24 hours.

Apart from removing water from the air as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also remove up to 99percent of mold spores that are airborne in the air by eliminating condensation.

Fixing Wood Floor Water Damage

It is important to remove water damaged hardwood floors to allow repairs to be completed by removing the subflooring.

The subflooring needs to be taken off and repaired before. The damaged hardwood boards need to be sanded down or replaced. To ensure uniformity, all floors should be sanded down and refinished after these repairs are completed.

Water Damage To Carpeting

Floods can cause severe destruction to your home and cause it to be difficult and expensive. Even if the water is eliminated from the area right away, there’s still a chance that you’ll have to eventually replace the flooring.

After spending time and money to restore your home back to its original state, it could be a shock to discover that the final results leave something to be desired.

It is crucial to determine the extent of damage as soon as is possible. The first step is to determine if the damaged area requires replacement. There is a way to wash the carpet and use it after drying. This can eliminate concerns about mildew growth or lingering scents.

Salvaging Carpet After a Water Damage Event

If the water damage is very extensive there is a chance that you will have noticeable stains on your carpeting. In certain instances, the only way to remove the stains is to replace the flooring. A strong, lingering odor could also be a reason to change your carpet. You will need to replace your carpet padding and padding if this happens.

The next step to determine whether or not it is necessary to replace your carpeting is to determine if the floor can be dried and cleaned professionally. Professionals will assist you in determining how severe the damages were. We will be able to determine if your carpet needs to be replaced or salvaged. Remember that certain methods employed to dry the carpet can further damage the carpet when it is already in poor condition.

Many factors determine the decision of whether padding or carpet is a good idea to replace it.

Do your carpets need to be dried and cleaned, or disinfected and cleaned professionally?

If the padding beneath your carpet has been damaged, this can affect how long the carpet will remain clean. Although your carpet has been dried quickly, mildew growth can still occur when the padding beneath is not dried.

The best way to be sure that your carpet is cleaned and disinfected following flooding is to employ an expert carpet cleaning service. After the job is completed you’ll be able to make an informed decision about the state of your carpet. You can also decide whether you want to replace it.

Drywall that has been damaged by water

The drywall repair procedure varies according to the extent of the damage. Repairing water damage could be as easy as removing a portion of drywall and cleaning the area and replacing it.

On the other hand of the coin serious damage could require a complete reconstruction of the wall, which could include wall studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to remove. Therefore, in the majority of cases drywalls will have to be replaced. We utilize moisture testing tools to determine the amount of moisture. This allows us to identify damaged areas and keep costs restricted to only necessary damaged areas.

It also causes structural damage, as it causes the wood to expand and shrink. It is easier to break wood when it is moistened by water. If the water remains for a lengthy time, there could be a significant amount of rot on the wood that can cause it to break easily.


This issue can be prevented by owners of buildings and homeowners making immediate changes to repair water-related structural issues that affect their property after an event like a flood or water-related damage.

Foundation Water Damage

There are numerous reasons why water damage could affect a foundation of a house. While not all water issues could cause structural damage, it’s crucial to address foundation problems as quickly as you can in order to avoid any further structural damage.

Water damage to the foundation can lead to many different problems based on how it’s dealt with. It could cause serious structural damage if the issue isn’t treated quickly.


Roof Water Damage

Water damage to roofs can result from natural disasters, just like foundation water damage. Roof damage could cause roof leaks as well as damage the foundation of a structure or the foundation of a home.

Leaking roofs are costly and may have significant drawbacks. A leak on the roof can cause mildew and mold to develop, which could be deadly. A leaky roof can affect the roof truss structure and cause structural damage to the roof.

If you don’t fix leaks in your ceiling right away, they can cause your rafters decay and soften. Damage to your roof can result from electrical issues which could lead to the possibility of an electric fire. All of these are good reasons to have your roof water damage fixed quickly following a flood or other unexpected damage.

HVAC Water Damage

If your HVAC system is failing or brand new equipment becomes inoperable, it can result in the structure of your home. Without HVAC, you are exposed to the interior of your home or business to all sorts of issues. The growth of mold can cause serious health issues.

Damage to Pipes from Water

If you’re experiencing pipe damage due to water, it is likely to be from a pipe that has burst in your home. If you’ve discovered an issue, it’s important to call an expert to stop the water from creating structural damage.

A ruptured pipe can result in devastating damage. The water could enter your home through broken pipes, causing extensive damage. It could cause structural damage.

Turn off the water supply and call a skilled IICRC-certified expert from a company for water restoration like Critical Control as soon as you detect broken pipes or water damage.

What’s the price to repair the water damage?

Water damage restoration cost per square foot

Water damage cleanup and repair costs will vary depending on how many square feet you have. National Flood Services has the following pricing breakdown per square foot.

Does water damage get covered by homeowner’s insurance?

Insurance policies for homeowners are typically used if the damage is unexpected and unintentional. The Insurance Information Institute states that homeowners insurance may be used to pay for repairs or replacement of broken windows however, it does not cover damage caused by neglect.

Damage from neglect may be defined as wear and tear on an object or surface due to exposure, lack of preventative upkeep or general deterioration. According to the US-based Insurance Information Institute, homeowners insurance doesn’t cover damage due to neglect.

If the damage to your property results from a flood, the event will not be covered under a homeowners policy. Flood insurance is mandatory. Mortgage lenders may require flood insurance in specific areas. Flooding can occur due to storms, flooding the ground or overflowing bodies of water or overflowing or surging bodies such as streams, rivers, lakes and oceans.