Water damage restoration service – Castle Hill

Property owners in Castle Hill experience water damage regularly. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

If a storm, flood, or burst pipe causes water to enter a house or building water damage is most of the time. Sometimes, the damage is obvious and obvious. In other instances, it’s subtle or under-reported.

It’s more complex than just drying the interior to fix water damage. Modern professional methods for water damage remediation like Critical Control, can often reduce damage that would normally require a complete structural replacement.

Water Damage Restoration Guidelines are Available for your reference. Call for a Professional

Many times, building or home owners try to tackle water damage using DIY solutions that can be found on the internet. This is a mistake. There are guidelines for dealing with water damage , and they call on the equipment and expertise of experts. The guidelines are laid out in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is required to ensure professional standardisation of situations involving water damage to structures or homes, as well as the risks associated with it.

The IICRC guidelines aid restoration experts such as Critical Control to evaluate the severity and type of damage to each project.

These guidelines are crucial for water damage professionals. In some situations, the use of an Indoor Environmental Professional (IEP) is essential. An IEP is professional with the experience and knowledge to examine the condition of a place, collect samples, get lab testsand advise us on the category of water damage.

This is especially important in cases where the building’s inhabitants could be high risk, there is a likelihood of adverse health consequences, or the occupants express a need to identify the suspected contaminants or any other reason for concerns about contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are divided into two categories in accordance with the degree of the infiltration of water is.

The category has to do with how contaminated the water that entered the structure has been. Category 1 water originates from a clean source, such as a tub or sink or a burst water supply.

The category 2 water has significant levels of contaminants and is likely to cause discomfort of illness should it be consumed or ingested. The sources could be water that isn’t obvious as a risk like the discharge from washing machines, or the spills from toilets.

The water in the category 3 is classified as extremely contaminated. It could contain toxic, pathogenic, or other harmful substances. This could be due to toilet trap leaks, and water flooding from streams and rivers. This water may be contaminated by pesticides, heavy metals or other toxic substances.


It is also possible to use the IICRC’s classes to determine just how much water has penetrated your property. This system basically sets guidelines for the level of saturation of the home or building.

Class 1 is the smallest amount of absorption and water. This is when water is in contact with less than 5% construction substances which absorb water. This is usually the case where most of the materials affected by water are low evaporation, meaning, they aren’t able to absorb and hold water. Examples are concrete, finished/coated wood, plaster or masonry.

Class 2 signifies that there is significant absorption of water and intrusion. It’s about 5% up to 40% of combined ceiling, floor and wall comprised of low-evaporation materials such as plaster wood, concrete or masonry.

The porous materials, such as carpet, insulation , and fiberboard which make up the class 3 make up around 40 percent of the floor, wall and ceiling materials, with approximately 40% of the materials in Class 3. Other materials such as concrete or plaster that don’t absorb water have not been adversely affected.

Class 4 refers to the fact that water has been deeply bound in materials that do not easily absorb water like wood, plaster, concrete and masonry. This means that it requires longer drying times and special drying methods.

How to dry a water Damaged House or Building


Physical extraction, dehumidification and evaporation are three ways to get rid of water from buildings. Eliminating water from liquids is at most 500 times more efficient than dehumidifiers and air movers. The quicker the structure is dried more efficiently. Both extraction and dehumidification methods will be affected by the amount of much material is being removed.

Professionals dealing with water damage employ an array of extraction techniques. We employ a range of tools including self-propelled and subsurface extraction tools.

Forced Evaporation

After as much water is removed, any moisture remaining is dried using high-velocity airmovers.

When an object gets wet or submerged in water it absorbs a portion of the water or moisture. As a result, the material becomes dampened or wet.

The saturation level is known as the point at which it becomes impossible to contain any additional moisture. The higher the humidity, the closer the air is getting to saturation.

In the evaporation phase in which water molecules are ejected from a liquid to a gaseous state. The process is referred to as evaporation.

This signifies that the object is no longer able to absorb water from the atmosphere. This is called the saturation point. Once saturation is reached, drying begins.

In the process of evaporation the highly efficient air moves dry the object on two sides. They create a strong airflow over the entire surface which is directed by a filter that completely covers the surface of the object.

Air mover can move 10-20 times more air than a fan , or an ordinary fan.

Air movers dry the object about 10 times faster than in natural conditions, where no air mover is used.

Airflows with high velocity removes the moisture from the surface and absorbs moisture drawn out by the airflow.

Utilizing Heat to Aid the Drying Process

A key component in any water damage restoration work is heating. To dry out the materials that have been affected by water, we make use of various kinds of heaters.

Electric Heaters: These heaters can be used to dry tasks that require multiple heat sources. You can run multiple heaters simultaneously because of their numerous power ratings.

You can also reduce or turn off the electric heater while the job is being done, without affecting other heaters. This means that you could lower one heater, while increasing the power of another to maximize efficiency and lower cost of energy.

Electric heaters are very common in restoration projects since they emit virtually zero emissions and consume very little water. They are more difficult to heat up and take more time for drying.

Hydronic Bioler (TES) Hydronic Bioler (TES), These boilers are able to heat quickly and emit very little carbon dioxide. They can run on propane or natural gas.

Hydronic boilers are different from electric heat in that they do not make use of forced air to distribute heat, which means it could be challenging to evenly heat an area using these kinds of heaters. They are also able to dry jobs that do not require walls or ceilings to remain in the same place.

They are also commonly employed when there isn’t enough electrical power to power electric heaters. Because they are extremely efficient at producing radiant heat, they can easily keep your drying area warm, even without an electrical power source.


To keep buildings and homes dry that are damaged due to water damage, we employ Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of water from damp structures that have suffered severe water damage within 24 hours.

The dehumidifier in your home can remove water from the air in the same manner it does an LGR Refrigerant Dehumidifier. It can get rid of the 99 percent or more of the airborne mold spores through the elimination of condensation.

Repairing Hardwood Floor Water Damage

It is essential to take away the hardwood floors that have been damaged by water to ensure that repairs can be done starting from the subflooring.

The subflooring needs to be removed and repaired first. After that, the hardwood flooring damaged need to be replaced or sanded. To ensure uniformity, all floors should be sanded down and restored after the repairs have been made.

Carpets are prone to water damage

If you have had the misfortune of experiencing an incident of flooding in your home this can be a stressful and expensive experience. You may need to replace your flooring even if you’ve removed the water from the area as quickly as possible.

After investing time and money in restoring your home back to its pre-flooding condition, it will be a shock to discover that the end result leaves an unsatisfactory impression.

Because of this, it is crucial to determine the extent of the damage as soon as possible. The first step is determine if the affected part requires replacement. There’s a good chance that the carpet will be cleaned and still used after it has dried and the cleaning process will help eliminate some of concerns regarding the growth of mildew and lingering odors.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting , especially if the damage to your carpet was severe. There are times when you have to change your flooring to eliminate these stains. An odor that is persistent and strong could also be a reason to get your carpet replaced. If it is, then you will likely require replacement of both your padding and carpet.

Then, consider if your floor can be professionally dried before you decide to change it. A professional service can aid you in determining the severity of the damages were. We can assess whether your carpet should be replaced or can be salvaged. Keep in mind that some methods used for drying can also cause further damage to the carpet when it is already in poor condition.

A few of the factors that will determine whether or whether the padding and carpet should be replaced include:

Can your carpets be dried or cleaned professionally?

If the padding beneath your carpet is damaged, this can affect the length of time your carpet will remain clean. Even though your carpet may be dry but the chance of mold growth is present if the padding beneath it is not dried out as well.

A professional carpet cleaning service is the best way to make sure your carpeting is dry and clean after a flood. Once the company has completed their task, you’ll be able to make a more informed decision about the state of your carpeting and decide whether or not you need to replace it.

Drywall Damaged by Water

The drywall repair procedure varies depending on the severity of damage. Repairing water damage can be as simple as removing a portion of drywall and then cleaning the affected area and then replacing it.

The other side is that significant damage may require a complete replacement of the wall, which includes fiberglass insulation and wall studs.

The drywall that is damaged by water usually harbors mold spores that cannot be removed easily. So in most cases the drywall needs to be replaced. We use moisture testing equipment which allow us to identify the extent to which humidity has gotten. This allows us to isolate areas of damage and limit costs to areas that need to be repaired.

The water can also cause structural damage because it causes the material to expand and expand and contract. After the wood has been moistened with water, it’s a lot easier to break. The wood can be brittle if left to dry in water for too long.


In order to counteract this problem, it’s crucial to homeowners and property owners to address structural damages from water-related issues with their home immediately following a flood or water damage incident.

Water Damage to the Foundation

Damage to a home’s foundation can happen due to a number of reasons. While not every water issue can lead to structural damage, it is important to correct foundational problems as quickly as you can in order to avoid any further structural damage.

Foundation water damage can lead to many different problems depending on how it’s dealt with. It can cause severe structural damage if it isn’t addressed promptly.


Roof Water Damage

Similar to foundation water damage roof water damage is also quite common following natural catastrophes. As well as creating roof leaks damage can cause problems with the walls and foundation of a home or the building.

Leaking roofs can be extremely costly and can have significant disadvantages. Leaks in the roof can result in mold and mildew to grow, which can be deadly. A leaky roof can harm the roof truss system and cause structural damage to the roof.

If you don’t take care to address leaks in your ceiling immediately they could cause your rafters decay and soften. Roof water damage can also be caused by electrical faults which could lead to the possibility of an electric fire. These are all good reasons to get roof water damage repaired immediately following a flood, or any other unexpected damage.

HVAC Water Damage

Your home could be damaged structurally if your HVAC system is not working properly or the wrong equipment is installed. You are putting your home and business at risk by not having HVAC. It can lead to severe health issues.

Pipe Water Damage

Damage to pipes typically caused due to a pipe burst within your home. When you’ve discovered that there is an issue, it is important for you to contact a professional to stop the flow of water and ensure it doesn’t cause structural damage.

The burst of pipes can cause lot of damage. When your pipes break they can let water into your home, creating extensive damage and requiring repair of water damage. This is which can bring with it structural damages.

Stop the water supply and then call an experienced IICRC-certified professional at a water restoration firm like Critical Control as soon as you spot damaged water pipes.

What’s the price to repair the water damage?

Water damage restoration cost per square foot

Water damage cleanup and repair costs will vary depending on the square footage you have. The following pricing breakdown can be obtained from National Flood Services for each square foot

Are water damage covered By the Homeowner’s Insurance?

Insurance policies for homeowners are typically appropriate if the damage is unexpected and not intentional. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement for a damaged window, however, not if the damage is a result of neglect.

Damage from neglect could be defined as wear and tear on a surface or object due to exposure, insufficient preventative maintenance, or general degradation. The Insurance Information Institute in the USA states that homeowners insurance will NOT cover neglect-related damage.

A homeowners policy would not be able to cover damage to water caused by flooding. Instead, a flood insurance policy would be necessary. Mortgage lenders might require flood policies in certain areas. Flooding can occur due to storms, flooding ground, overflowing bodies of water, or overflowing or surging bodies such as rivers, lakes, streams and oceans.