Water damage remediation – Christie

Homeowners in Christie get hit with flood damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water enters a building or house via a flood, storm or burst pipes. Sometimes the damage is apparent and evident. Other times, it’s more subtle or unreported.

Remediation of water damage is more complex than just drying out the interior. Modern methods for water damage restoration typically restorers such as Critical Control can mitigate damage which previously would have required complete structural replacement, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are available – Call for a Professional

A lot of times, property or home owners attempt to deal with water damage using DIY solutions available on the internet. This is a mistake. There are guidelines to deal water damage that require the equipment and expertise of professionals. These guidelines are detailed in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. The guide was created due to the necessity of professional standards in cases involving water damage to homes and buildings and the dangers they can present.

The IICRC guidelines aid restoration experts such as Critical Control to evaluate the kind and severity of the damage on each project.

These guidelines are important for professionals who deal with water damage. In certain circumstances, the use of an Indoor Environmental Professional (IEP) is required. An IEP is a person who has the expertise and experience to analyze the condition of a place and take samples, conduct lab tests and provide us with advice regarding the nature of the water damage.

This is especially important in cases where the building’s inhabitants could be high risk, there is a likelihood of adverse health effects, the occupants have a desire to know the suspected contaminants, or some other reason for concerned about contamination.

Categories and classes of Water Damage


Projects for water damage restoration can be classified into two types according to the extent of the water infiltration is.

The water that enters the structure was classified according to its level of contamination. Category 1 is water that is clean such as an unclean sink or tub, or burst water supply.

Category 2 involves water that contains significant amounts of contaminants, and could be able to cause discomfort or illness if contacted or consumed. These include sources that may not normally seem like dangers, such as the discharges from washing machines, or toilet overflows.

Category 3 water is grossly contaminated meaning that it can contain toxic, pathogenic or other harmful substances in it. Usually this means contamination from sewage, toilet backflows after the trap for toilets, seawater, water flooding from streams and rivers, or any other source of water that comes from the building exterior. This category of water can have pesticides, heavy metals, regulated materials or toxic substances in it.


You can also utilize the IICRC’s courses to determine how much water has gotten into your property. This system basically sets guidelines for the saturation of the structure or the home.

The lowest level of water absorption , and the most water is classified as Class 1. This is when water comes into contact with less than 5% construction substances that absorb water. This is usually the case that the majority of the building materials affected by water are low in evaporation, which means that they do not absorb or hold in water. Concrete and masonry, as well as plaster and coated or finished wood are only a few examples.

Class 2 means that there is significant absorption of water and intrusion. This is about 5 up to 40% of the combined floor, wall and ceiling comprised of low-evaporation materials like plaster, wood, concrete, or masonry.

Class 3 is the term used to describe 40% or more of the flooring, walls, and ceiling materials are porous like fiberboard, insulation, carpet and so on. and also where other materials that don’t absorb water like concrete or plaster haven’t been adversely affected.

Class 4 refers to the fact that water has become deeply stuck in materials that do not easily absorb water as concrete, wood, and masonry. This will require more time to dry and special drying methods.

How do you dry a water damaged Building or House


Three ways of removing water from buildings are physical extraction, dehumidification, and evaporation. The elimination of water that is liquid is at about 500 times more efficient than merely putting up with dehumidifiers and air moving machines. The quicker the structure dries the better. The amount of stuff to be extracted will influence the extraction process as well as dehumidification methods.

Water damage professionals employ a variety of extraction methods. Our tools include subsurface tools, wands as well as self-propelled tools and vacuum squeezers.

Forced Evaporation

Once all water has been removed, any remaining moisture is dried with high-speed airmovers.

When an object is moistened or submerged in water, it absorbs some of the water or moisture. The result is that the object becomes damp or wet.

The saturation level is described as the point at which it becomes impossible to contain any additional moisture. The higher the humidity, the more close the air is getting to saturation.

In the evaporation process the water molecules leap from a liquid state to a gaseous state. The process is called evaporation.

In other words, the object will no longer absorb additional moisture from the atmosphere. This is known as the saturation point. the point at which evaporation begins. As soon as saturation is reached the drying process commences.

High-efficiency airmovers dry the object in two areas in the evaporation phase. They generate a large airflow across the surface of the object, which is directed by a filter that covers the entire area of the object.

A fan that moves air can move between 10 and 20 percent more air than a fan, or a standard fan in your home.

The item is dried by airmovers around 10 times faster than in natural conditions where there was no air movement.

A high-velocity airflow dries the surface and draws in the moisture that has been drawn away by the air movers.

Using Heat To Assist the Drying Process

The element of heat is crucial to the success of any water damage restoration task. We employ a variety of heaters to dry materials that have been damaged by water.

Electric Heaters: Electric heaters are great for drying tasks which require the use of several different heat sources. It is possible to run several heaters simultaneously due to their numerous Wattages.

Electric heat is also adjustable, allowing it to be shut off or reduced when the work is in process, but without impacting other heaters. In order to maximize efficiency and lower your expenses for energy you can alter the wattage of a heater and increase its power.

Electric heaters are common in restoration jobs since they generate virtually no emissions and require very little water. They are more difficult to heat up and require more time to dry.

Hydronic Bioler (TES): They are also extremely efficient at heating up quickly, while still producing very little emissions. They typically operate with propane or natural gas.

Hydronic boilers differ from electric heaters as they don’t make use of forced-air heat to spread heat. This can make it difficult to heat large areas evenly using these heaters. They also run at less temperature, which makes them ideal for drying jobs which require ceilings and walls to be left unattended.

When electric heaters cannot be employed, hydronic boilers may frequently be employed. They are capable of producing radiant heat and can keep your drying space warm without the need for an electric source.


To dry buildings and houses which have suffered damage due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of moisture from damp structures that have suffered extensive water damage within 24 hours.

In addition to removing water from the air, as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also remove up to 99% of airborne mold spores the air by eliminating condensation.

Fixing Wood Floor Water Damage

The floors that have been damaged by water need to be cut up to ensure repairs can be made from the subflooring upwards.

The subflooring needs to be removed and repaired prior to. The damaged hardwood boards need to be sanded down or replaced. After these repairs are completed, the entire floor should be sanded, refinished and polished to ensure uniformity.

Water Damage to Carpeting

If you’ve had the misfortune of experiencing flooding in your house it could be a costly and stressful experience. Even if water is eliminated from the region immediately, there’s still a chance that you’ll need to replace your flooring eventually.

After spending time and money to restore your home to its pre-flooding condition, it will be devastating to find that the end result leaves an unsatisfactory impression.

It is vital to identify the extent of damage as soon as is possible. One of the first things that needs to be addressed is whether or not the affected area needs to be replaced. There is a good chance that the carpet will be cleaned and used after it has dried and the cleaning process can help to eliminate the worries about the growth of mildew and persistent odors.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpeting if the water damage was very serious. In some instances the only option to get rid of the stains is to replace the flooring. An odor that is persistent and strong could also be a reason to change your carpet. If it is it is likely that you’ll require replacement of both your padding and carpet.

The next step in determining whether or not it is necessary to replace your carpeting is to determine if the floor can be dried and cleaned professionally. A professional service will aid you in determining the severity of the damage was. Our company will assess your carpet and determine whether it’s worth replacing or salvageable. If your carpet is damaged, certain drying methods can cause further damage to it.

The main factors that will determine whether or whether the padding and carpet require replacement are:

Can your carpets be dried and cleaned, or disinfected and cleaned professionally?

If the padding beneath your carpet is damaged, it could affect how long the carpet can last. Although your carpet has been dried in a short time, mildew growth is still possible in the padding beneath if it is not dried.

Professional carpet cleaning company is the best way to ensure your carpet is dry and clean following an event of flooding. Once the cleaning is complete, you’ll be able make an informed decision about the state of your carpet. It is also possible to decide whether you want to replace it.

Water Damaged Drywall

The extent of damage determines the nature and technique of repair. Repairing water damage can be as easy as removing some drywall and cleaning the area and replacing it.

On the other side of the coin, significant damages could necessitate a total wall replacement, including the wall studs as well as fiberglass insulation.

The drywall that is damaged by water usually harbors mold spores that can’t be easily removed. In most instances drywalls will have to be replaced. We utilize moisture testing tools that help us determine where and how extensive the humidity has gotten. This allows us to isolate the areas that are damaged and limit the costs to areas that need to be repaired.

The water can also cause structural damage by causing the wood material to expand and shrink. After the wood has been moistened with water, it’s much easier to break. If the water sits for a prolonged time, there can be a significant amount of rot within the wood, which could cause it to crack easily.


To avoid this issue, it’s important for building owners and homeowners to take care of structural damage caused by moisture-related problems with their home immediately following the water or flood event.

Water Damage to the Foundation

The damage caused by water to a house’s foundation can occur for a number of reasons. Although not all water issues cause structural damage, it’s crucial to address foundational issues in the quickest time possible to prevent structural damage.

Water damage to the foundation can trigger a number of different issues in the manner it is dealt with. It can cause severe structural damage if not taken care of promptly.


Roof Water Damage

Like foundation water damage, roof water damage is quite common following natural disasters. Roof damage could cause roof leaks and also damage the foundation of a building or the foundation of a home.

Roof leaks can be very expensive and could have major drawbacks. The roof’s leaks could lead to mold growth, which can prove fatal. A roof that is leaky could cause damage to the roof truss system, which can cause structural damage to the roof.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you don’t take action immediately. Roof water damage can also result from electrical issues which could lead to the possibility of an electric fire. All of these are excellent reasons to get roof water damage repaired swiftly following a flood , or any other sudden damage.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system is not working properly or the wrong equipment is installed. You are putting your business and your home at risk in the absence of HVAC. The growth of mold can cause serious health issues.

Damage to pipes caused by water

If you have pipe water damage, it is most likely coming from a ruptured pipe inside your home. If you’ve discovered a leak, it is essential to contact an expert to stop the water from damaging the structure.

The burst of pipes can cause lot of damage. If your pipes fail, water may enter your home, creating extensive damages and necessitating repair of water damage. This is an event that could bring with it structural damages.

If you spot water damage to your pipe that is not repaired, shut off the supply of water.

What’s the cost for the restoration of water damage?

Water damage restoration cost per square foot

Based on the square foot the repair and cleanup costs can vary. The following breakdown of pricing can be obtained from National Flood Services for each square foot

Are water damage covered by the homeowner’s insurance policy?

Homeowners insurance policies are usually used if the damage is unexpected and not intentional. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement for a broken window, but not if the damage is a result of neglect.

Neglect can be described as damage to a surface or an object that is the result of exposure, poor maintenance or general wear and tear. According to the US-based Insurance Information Institute, homeowners insurance does not cover damage due to neglect.

A homeowner’s insurance policy will not cover water damage due to flooding. The flood insurance policy is mandatory. Mortgage lenders might require flood insurance in some areas. Flooding can occur due to floods, storms or overflowing bodies of water or overflowing or surging bodies like streams, rivers, lakes and oceans.