Water damage remediation – Cortez - Stege

Homeowners in Cortez - Stege suffer water damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

The most common cause of water damage is when water gets into a structure or home through a storm, flood, or burst pipes. Sometimes, the damage is obvious and evident, while other times it is minor or hidden.

It’s more difficult than simply drying the interior of the building to repair water damage. Modern water damage remediation techniques, such as Critical Control, can often reduce damage that would normally need a total structural replacement.

Water Damage Restoration Guidelines Exist – So Call an Professional

Many times, homeowners or builders try to fix water damage using DIY solutions discovered online. This is not a good idea. Water damage can be managed by following established guidelines. These guidelines demand the expertise and equipment of professionals. The guidelines are laid out in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is required to ensure the professional standardisation of scenarios involving water damage houses or buildings, and the risks associated with it.

The IICRC guidelines help restoration experts such as Critical Control to evaluate the severity and type of damage to each project.

These guidelines are essential for professionals who deal with water damage. In certain situations it is necessary to employ an Indoor Environmental Professional (IEP) is necessary. An IEP is someone who has the expertise and experience to analyze a site for contamination, take samples, run lab tests, and then provide us with advice regarding the nature of the water damage.

This is especially important in situations where the building’s inhabitants are at high risk or have concerns regarding contamination.

Water damage by categorizes and classes


Restoration projects for water damage are classified into categories and class based on the severity of the flood.

The water that entered the structure was classified based on its contamination. Category 1 is water that originates from a clean source, such as the sink or tub, or a water source that bursts.

Category 2 water is characterized by high levels of contaminants and could cause illness if it is inhaled or touched. It could include sources that may not normally seem like an issue, like the discharge from washing machines or toilet overflows.

Category 3 water can be classified as extremely polluted. It could contain pathogenic, toxic, or any other hazardous substances. This usually means contamination by sewage, toilet backflows after the trap for toilets and seawater, flooding from rivers and streams, or any other water flowing from the exterior of the building. This kind of water could include heavy metals, pesticides that are regulated, toxic materials, or substances in it.


The IICRC has also developed classes to follow when measuring the amount of water intrusion on your property. The system basically serves as an outline of the amount of water a building or home should be.

The lowest amount of absorption by water and the most water is classified as Class 1. It is the case the case when water comes in contact with less than 5% construction materials that absorb water. This is because most substances that are affected by water do not retain or absorb water. Examples include concrete, coated or finished wood, plaster , or masonry.

Class 2 means that there is substantial absorption of water and intrusion. This means that between 5 and 40% of the total ceiling, floor and wall is made of materials with low-evaporation, such as plaster, concrete, wood or masonry.

The porous materials like fiberboard, insulation and carpet which make up Class 3 comprise around 40 percent of the floor, wall and ceiling materials. This includes about 40% in class 3. and other materials that don’t absorb water like concrete or plaster haven’t been adversely affected.

Class 4 means that water has become deeply trapped in the materials that can not easily absorb water as wood, plaster, concrete and bricks and mortar. This will require more time to dry and special drying techniques.

How Drying a Water Damaged Home or Building Works


Three methods for removing water from buildings include physical extraction, dehumidification and evaporation. Eliminating water from liquids is, at a minimum, 500 times more efficient than dehumidifiers and airmovers. The faster the structure can dry, the better. Both extraction and dehumidification methods are affected by how much material is being removed.

Water damage experts employ various extraction methods. Our tools include wands, subsurface extraction tools, self-propelled tools, and vacuum squeegees.

Forcible Evaporation

Once all water is removed, the remaining moisture is dried with high-speed airmovers.

A submerged object absorbs water and moisture once it’s moistened. The object is then damp or wet because of this.

The saturation level is referred to as the point where it becomes impossible to contain any additional moisture. The higher the humidity, the more close the air is to saturation.

In the evaporation phase the water molecules leap from a liquid state to a gaseous state. The process is referred to as evaporation.

This signifies that the object has stopped absorbing water from the air. This is referred to as the saturation point. Once the saturation point is reached drying will begin.

In the evaporation phase high-efficiency air mover dry the object from two sides. They create a strong air flow over the entire surface that is controlled through a filter system that completely covers the area of the object.

A fan that moves air can move 10 to 20 times more air than a fan , or an ordinary fan.

Air movers dry the object about 10 times faster than in the natural environment, in which no air mover is used.

A high-velocity airflow is able to dry the surface of the object and absorbs the moisture that has been taken out by the air movement.

Use heat to assist the drying process.

Heat is an important component of any water damage restoration project. To dry out the materials which have been affected by water, we make use of a number of different types of heaters.

Electric Heaters: These heaters may be used to dry tasks that require multiple heat sources. This is because they come in a variety of power levels, which allows you to operate multiple heaters at once.

You can also reduce or turn off the electric heater while the job is being completed, but without impacting other heaters. To increase efficiency and reduce your energy bills you can alter the wattage of one heater and increase its wattage.

Electric heaters are a common feature in restoration work because they produce essentially zero emissions and consume minimal amounts of water. The only downside is that they take longer time to warm up, which means that they require longer drying time. process in general.

Hydronic Bioler (TES),: The boilers quickly heat up and emit very little carbon dioxide. They can run on natural gas or propane.

Hydronic boilers differ from electric heating because they don’t use forced-air heat to disperse heat. This can make it difficult to distribute heat evenly over large areas using these heaters. They also operate at less temperature, which makes them ideal for drying jobs that require walls and ceilings to be left in place.

If electric heaters are not employed, hydronic boilers may typically be utilized. Because they are so efficient at producing radiant heat, they are able to easily keep your drying space warm even when there is no electrical power source.


We utilize low Grain Refrigerant Dehumidifiers (LGR) to dry buildings as well as houses that have suffered water damage.

The LGR Home Dehumidifier can draw 170 pints of moisture from damp structures that have suffered severe water damage within 24 hours.

Apart from removing water from the air as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also remove as much as 99% of airborne mold spores the air by eliminating condensation.

Repairing Hardwood Floor Water Damage

The floors that have been damaged by water need to be ripped up so repairs can take place beginning with the subflooring and moving upwards.

The damaged subflooring first needs to be removed and replaced. The damaged hardwood boards need to be sanded down or replaced. To ensure uniformity flooring, all floors should be sanded and restored after the repairs have been made.

Carpets are vulnerable to water damage

If you’ve experienced flooding in your house this can be a stressful and expensive experience. Even if the water has been removed from the affected area right away, there’s still a chance that you will have to replace the flooring in the future.

After spending time and money to restore your home to original state, it could be a shock to discover that the finished results leave something to be desired.

It is essential to assess the severity of the damage as quickly as possible. The first thing to do is determine if the affected area needs to be replaced. There’s a good possibility that the carpet could be cleaned and used after drying, and this cleaning will help eliminate some of concerns regarding the growth of mildew and persistent odors.

Salvaging Carpet After a Water Damage Event

If the damage from water is severe, it is possible that you’ll notice marks on your carpet. In some instances the only option to eliminate the stains is to replace the flooring. Another reason that might prompt you to think about replacing your carpeting is a strong and lingering odor. If it is, then you will likely require replacement of both your carpet and padding.

The next step to determine whether or not you’ll need to replace your carpet is to find out if the floor can be cleaned and dried professionally. A professional service will help you determine how serious the damage was. We can assess whether your carpet should be replaced or can be salvaged. If the carpet you have is already damaged, certain drying techniques can further damage it.

A variety of factors can determine whether the carpet or padding is a good idea to replace it.

Do your carpets need to be dried or cleaned professionally?

If the padding under your carpet has been damaged, it can impact the length of time your carpet can last. Even though your carpet is dried quickly, mildew growth may still be present when the padding beneath isn’t dried.

A professional carpet cleaning service is the most effective way to make sure your carpeting is dry and clean following an event of flooding. Once the work is done, you’ll be able take a shrewd decision on the state of your carpet. It is also possible to decide whether you want to replace it.

Drywall damaged by water

The severity of the damage determines the nature and method of drywall repair. Repairing water damage could be as simple as removing the drywall portion and then cleaning the affected area and replacing it.

On the other side of the coin, serious damage might necessitate whole reconstruction of the wall, which could include wall studs and fiberglass insulation.

The drywall that is damaged by water usually harbors mold spores which can not be removed easily. So in most cases drywalls will have to be replaced. We employ moisture testing instruments to determine the amount of moisture. This helps us identify damaged areas and limit costs to those areas that are only damaged.

It also causes structural damage by causing the material to expand and expand and contract. Once the wood is moistened by water, it becomes a lot easier to break. The wood will get brittle if allowed to dry in water for too long.


This problem can be avoided by owners of buildings and homeowners taking immediate action to fix water-related structural issues that affect their property after an event like a flood or water damage.

Foundation Water Damage

Water damage to a house’s foundation can occur for a number of reasons. While not every water issue cause structural damage, it is important to correct foundational problems as quickly as you can in order to avoid any future structural damage.

Foundation water damage can result in a myriad of issues based on the way it’s treated. It can cause severe structural damage if the issue isn’t treated promptly.


Roof Water Damage

Roof water damage can also be caused by natural catastrophes, just like foundation water damage. As well as creating roof leaks damage can cause problems with the walls and foundation of a home or the building.

Roof leaks can be costly and may have significant drawbacks. The roof’s leaks could result in the growth of mold that could be fatal. Leaks in the roof may cause damages to the roof truss.

Leaks in the ceiling can cause your rafters to decay and soften if you don’t deal with them right away. Electrical faults are also common in the case of roof water damage which could cause the possibility of an electrical fire. All of these are good reasons to have your roof water damage repaired immediately following a flood, or other type of unexpected damage.

HVAC Water Damage

Your home could suffer structural damage if your HVAC system fails or is defective equipment is installed. You are putting your home and business at risk by not having HVAC. It is possible for mold to grow and cause a variety of serious health issues.

Pipe Water Damage

If you’re experiencing pipe water damage, the water is likely to be from a pipe that has burst in your home. When you’ve identified leak, it’s essential to contact a professional to stop the water from damaging the structure.

The burst of pipes can cause number of damages. If your pipes fail and water enters your home, creating extensive damage and requiring repair of water damage. This is a process that can result in structural damage.

If you spot damaged water pipes, shut off the supply of water.

What is the price of cleaning up water damage?

Water damage restoration cost per square foot

Water damage cleanup and repair costs can vary based on how much square footage you have. The following breakdown of pricing is available at National Flood Services for each square foot

Are water damages covered by homeowner’s insurance?

Homeowners insurance policies are usually used if the damage is sudden and accidental. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement for a damaged window, but not if the damage was the result of negligence.

Neglect is defined as damage to a surface or an object that is the result of the weather, lack of maintenance or general wear and tear. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance does not cover damage from neglect.

If the damage to your property is the result of a flood, the event will not be covered under homeowner’s insurance. A flood policy is required. In certain areas where flood insurance is required, it’s usually by mortgage lenders. Flooding may occur due to flooding, over-saturated ground, flooding or overflowing bodies of water, such as lakes, rivers, ponds oceans, streams together with high winds.