Water damage restoration service – Eastport

Homeowners in Eastport experience water damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

Water damage is more common when water seeps into a building or residence by way of a flood, storm or ruptured pipe. Sometimes, the damage is obvious and obvious, sometimes it’s hidden or minor.

It is more complicated than just drying the interior of the building to repair water damage. Modern professional techniques for water damage repair, such as Critical Control, can often minimize damage that otherwise would need a total structural replacement.

Water Damage Restoration Guidelines are available – Call a Professional

Oftentimes, home or building owners try to tackle water damage by using DIY solutions that can be found online. This is not a good idea. There are guidelines for dealing water damage that call on the skills and tools of professionals. These guidelines are detailed in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the need for professional standardisation of situations that involve water damage to buildings and homes and the risks they pose.

The IICRC guidelines help restoration experts like Critical Control to evaluate the kind and severity of the damages on every project.

There are many reasons why water damage experts need to adhere to these guidelines. In some situations there are situations where the use of an Indoor Environmental Professional (IEP) is necessary. An IEP is an expert who has the knowledge and experience to evaluate a site for contamination, collect samples, get lab tests, and then advise us on the category of water damage.

This is especially important in cases where the building’s inhabitants are at risk or have concerns regarding contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are classified into categories and class, based on the extent of the flood.

The water that enters the structure was classified based on its level of contamination. Category 1 water is clean, such as an unclean sink or tub, or burst water supply.

Category 2 is water that contains significant amounts of contaminants and has the potential to cause discomfort or illness if contacted or consumed. This could include waters that are not readily apparent as a danger such as the effluent from washing machines and overflows from toilets.

The water in the category 3 is considered extremely contaminated. It could be contaminated by pathogenic, toxic, or any other hazardous substances. This could be due to backflows of sewage, toilet trap leaks, and water flooding from streams and rivers. The water could include heavy metals, pesticides or harmful substances.


The IICRC has also developed classes to follow when determining the level of water intrusion to your property. This system basically sets guidelines for the saturation of the home or building.

Class 1 refers to the lowest amount of water and absorption. This happens the case when water comes in contact with less than 5% the building substances which absorb water. This is due to the fact that most of the substances that are affected by water don’t hold or absorb water. Concrete, plaster, masonry, and coated or finished wood are only some of the examples.

Class 2 means that there is substantial absorption of water and intrusion. It means that anywhere between 5% and 40% of the floor, ceiling and wall is made from low-evaporation substances like plaster, concrete, wood, or masonry.

Class 3 means that about 40% or more of the flooring, walls, and ceiling materials are porous such as fiberboard, insulation, carpet and so on. Other materials, such as cement or plaster that don’t absorb water haven’t been affected in any way.

Water has been absorbed by materials like concrete, plaster, and wood that are classified as Class 4. This means that it requires longer drying times and special drying techniques.

How Drying a Water Damaged Home or Building Works


Physical extraction, dehumidification and evaporation are the three main ways to get rid of water from a building. The elimination of water that is liquid is at minimum 500 times more efficient than just putting up with dehumidifiers and air moving machines. The quicker the structure can dry more efficiently. The amount of stuff to be extracted will influence both extraction and dehumidification techniques.

Water damage experts employ different extraction techniques. We employ a range of equipment, such as subsurface extraction tools and self-propelled tools.

Forced Evaporation

The remaining moisture is then dried with high-velocity air movers after the maximum amount of water is removed.

When an object is moistened or submerged in water, it absorbs some of the moisture or water. The result is that the object becomes damp or wet.

The degree of saturation is known as the point at which it becomes impossible to contain any more moisture. The greater the humidity, the more close the air is getting to saturation.

The evaporation phase is the time when water molecules transition from the state of liquid to a gaseous one. The process is referred to as evaporation.

In this way, the object does not absorb any more moisture from the atmosphere. This is known as the saturation point. the point at which evaporation begins. Once the saturation point is reached drying starts.

High-efficiency air movers dry the object on two sides in the evaporation phase. They create strong airflow which is controlled by a filter system.

An air mover moves around 10 to 20 times the amount of air than an ordinary fan.

The item is dried using air movers approximately 10 times faster than natural conditions in which no air mover was employed.

Airflows that are high-velocity removes the moisture from the surface and absorbs moisture pulled out by the air movement.

Utilizing Heat To Aid In the Drying Process

One of the most essential elements in any water damage restoration work is heating. In order to dry out any materials damaged by water, we make use of a number of different types of heaters.

Electric Heaters: These heaters may be used for drying jobs which require multiple sources of heat. This is due to the fact that they can be found in various power levels, which allows you to use multiple heaters at the same time.

Electric heat is also capable of being reduced or turned off when the work is in process, without affecting your other heaters. This means that you could reduce one heater while increasing the power of the other to increase efficiency, and decrease your energy costs.

Electric heaters are a common feature in restoration projects since they emit virtually zero emissions and consume minimal amounts of water. The only downside is that they take longer to heat up, requiring more time for the drying process overall.

Hydronic Bioler (TES) Hydronic Bioler (TES), The boilers quickly heat up and emit very little carbon dioxide. They can run on natural gas or propane.

Hydronic boilers differ from electric heating as they don’t make use of forced-air heat to disperse heat. This makes it difficult to evenly heat large areas using these heaters. They are also able to dry jobs that do not require ceilings or walls to be able to stand in their place.

Hydronic boilers are often used in situations where there is no electrical power to power electric heaters. They can generate radiant heat, and they can keep your drying space warm without the need for electricity.


To dry buildings and houses that are damaged due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can draw 170 pints of water from damp structures that have suffered extensive water damage within 24 hours.

The dehumidifier in your home can remove water from the air the same way it does an LGR Refrigerant Dehumidifier. It can also get rid of the 99 percent or more of the airborne mold spores through the elimination of condensation.

Fixing Wood Floor Water Damage

It is crucial to get rid of water damaged hardwood floors to ensure that repairs can be made by removing the subflooring.

The subflooring has to be removed and repaired first. Next, the hardwood boards affected need to be sanded or replaced. To ensure a uniform appearance, all floors should be sanded down and repaired after these repairs are completed.

Water Damage to Carpeting

Floods can cause significant destruction to your home and can make repairs expensive and time-consuming. You might need to change your flooring even if you’ve eliminated the water from the area as soon as is possible.

It would be devastating to find out that your home is not in the best condition after spending so much time and money to fix it.

Because of this, it is crucial to determine the extent of damage as quickly as is possible. The first step is to determine if the damaged part requires replacement. It is possible to clean the carpet and then use it after drying. This will eliminate any worries about the growth of mildew or lingering smells.

Salvaging Carpet After a Water Damage Event

You may notice stains on your carpet if the damage from water was serious. In some cases the only solution to get rid of these stains is to change the flooring. A strong, lingering odor may also be the reason to replace your carpeting. If it is it is likely that you’ll need to replace both the padding and carpet.

The next step in determining whether or not you’ll need to replace your carpet is to assess whether the flooring is able to be cleaned and dried professionally. Professionals will aid you in determining the severity of the damages were. We will be able to determine if your carpet should be replaced or can be saved. If your carpet is already damaged, a few drying techniques can further damage it.

Some of the considerations that will determine whether or not the carpet and padding need to be replaced are:

Are your carpets professionally cleaned, dried and disinfected?

The carpet’s ability to stay clean is affected when the padding underneath it is damaged. Even though your carpet is dried fast, the growth of mildew may still be present when the padding beneath isn’t dried.

A professional carpet cleaning company is the best option to make sure your carpeting is clean and dry after a flood. Once the work is done, you’ll be able take a shrewd decision on the state of your carpet. It is also possible to decide whether to replace it.

Water Damaged Drywall

The drywall repair procedure varies according to the extent of damage. Repairing water damage can be simple as taking out an area of drywall then cleaning it and then replacing it.

On the other side of the coin severe damage might necessitate whole wall replacement, including walls studs and fiberglass insulation.

The spores of mold can be seen in drywall damaged by water that is difficult to eliminate. In most cases the drywall needs to be replaced. We employ moisture testing instruments to determine the amount of the moisture. This allows us to identify areas of damage and limit the costs to only necessary damaged areas.

Water also causes structural damage by causing the material to expand and shrink. It is much easier to break wood when it has been moistened by water. If the water sits for a lengthy time, there can be an extensive amount of rot within the wood which can make it break easily.


This issue can be prevented by homeowners and building owners taking immediate action to fix water-related structural issues with their property after flooding or other water-related damage.

Water Damage to the Foundation

Water damage to a house’s foundation can happen due to many reasons. While not all issues with water result in structural damage, it’s crucial to address foundational issues as quickly as possible to prevent structural damage.

Foundation water damage can cause various issues in the manner it is dealt with. If the problem isn’t addressed quickly, it can cause serious structural damage.


Roof Water Damage

Like foundation water damage, roof water damage is also fairly common after natural disasters. As well as creating roof leaks damage can also result in problems with the walls and foundation of a home or construction.

Leaking roofs are costly and have serious disadvantages. Leakage in the roof could result in the growth of mold, which can prove fatal. Leaks in the roof may also result in damages to the roof truss.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you don’t deal with them right away. Electrical problems are also common in roof water damage, which can cause the possibility of an electrical fire. These are all good reasons to have your roof water damage fixed quickly following a flood or other sudden damage.

HVAC Water Damage

If your HVAC system starts to fail or brand new equipment is found to be faulty, this can definitely result in the structure of your home. If you do not have HVAC, you are opening the interior of your business or home to all sorts of issues. It can lead to serious health problems.

Damage to pipes caused by water

If you’re experiencing pipe water damage, it is most likely coming from a ruptured pipe inside your home. Once you have determined that there has been an issue, it is important to get professional help to stop the flow of water and ensure it doesn’t lead to structural damage.

The burst of pipes can cause amount of damage. The water can get into your home through broken pipes, causing extensive damage. This can lead to structural damage.

As soon as you notice broken pipe water damage, shut off the supply of water.

What is the price of restoring water damages?

Water damage restoration cost per square foot

Water damage cleanup and repair costs can vary based on the square footage you own. National Flood Services has the following pricing breakdown for each square foot:

Are water damages covered by homeowner’s insurance?

Homeowners insurance policies are usually used if the damage is sudden and unintentional. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement of a broken window, however, not if the damage occurs as a result of negligence.

Neglect can be described as damage to an object or surface that results from the weather, lack of maintenance or general wear and tear. The Insurance Information Institute in the USA states that homeowners insurance will not cover damage caused by neglect.

A homeowners policy would not cover water damage caused by flooding. Instead, a flood insurance policy would be required. Mortgage lenders may require flood policies in certain areas. Flooding can occur due to storms, flooding the ground, overflowing bodies of water or the overflowing or surge of bodies like streams, lakes, rivers and oceans.