Flood damage restoration service – El Cerrito

Building owners in El Cerrito experience burst pipe damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

When a flood, storm or burst pipes cause water to get into a home or building water damage is more often than not. Sometimes, the damage is obvious and evident, while other times it’s hidden or minor.

It’s more difficult than simply drying the interior to repair water damage. Modern water damage remediation techniques like Critical Control, can often minimize damage that otherwise would need a total structural replacement.

Water Damage Restoration Guidelines are Available – Call a Professional

Many times, building or home owners try to tackle water damage using DIY solutions found online. This is not a good idea. There are guidelines for dealing water damage that require the tools and skills of professionals. These guidelines can be available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure that there is a professional standardisation for instances involving water damage to structures or homes, as well as the risk associated with it.

The IICRC guidelines help restoration experts like Critical Control to evaluate the kind and severity of the damage to each project.

There are many reasons why water damage experts need to follow these guidelines. In certain situations there are situations where an Indoor Environmental Professional (IEP) is required. An IEP is a professional who has the training to assess the health of a building, collect samples, get lab tests, and then advise us on the category of water damage.

This is especially important in situations where the occupants of the building could be at risk, there are a chance of adverse health effects, the occupants express a need to identify the contaminants that are suspected, or some other reason that there might be concerns about contamination.

Water damages caused through types and classes


Restoration projects for water damage are classified into categories and class depending mostly on the extent of the flood.

The water that enters the structure was classified according to the degree of contamination. Category 1 means that the water comes from a clean source, such as burst water supply, or a sink or tub.

The category 2 water has high levels of contaminants and is likely to cause illness or discomfort when inhaled or consumed. It could include sources that might not appear to be a threat such as discharge from washing machines or toilet overflows.

Water in the category 3 is severely polluted, meaning it could contain toxic, pathogenic or any other harmful agent within it. This could be due to sewage backflows, toilet trap leaks, and the flooding of rivers and streams. This category of water can contain heavy metals, pesticides, regulated materials or toxic chemicals in it.


The IICRC has also established classes to follow when determining the level of water intrusion into your property. This system is basically an indication of how much saturated a structure or residence should be.

Class 1 is the smallest amount of water and absorption. This happens when water is in contact with less than 5% of construction materials that absorb water. This is because most materials that are affected by water won’t absorb or hold water. Concrete and masonry, as well as plaster and coated or finished wood are only a few examples.

Class 2 means that there is significant absorption of water and intrusion. This is about 5 to 40% of the total ceiling, floor, and wall comprised of low-evaporation materials like plaster, wood, concrete or bricks and mortar.

Class 3 is the term used to describe 40 percent or more of flooring, walls and ceiling surfaces are porous like fiberboard, insulation, carpet, etc. and also where other materials that don’t absorb much water such as plaster or concrete have not been adversely affected.

Class 4 refers to the fact that water has been deeply stuck in materials that do not readily absorb water, such as wood, plaster, concrete and bricks and mortar. This means that it requires longer drying times and special drying techniques.

How to Dry a Water Damaged House or Building


Three ways of removing water from buildings include physical extraction, dehumidification, and evaporate. Eliminating liquid water is, at a minimum, 500 times more efficient than using dehumidifiers or airmovers. The faster the structure is dried, the more efficient. The amount of stuff to be extracted will influence both extraction and dehumidification techniques.

Water damage experts employ an array of extraction techniques. We use a variety of tools including self-propelled and subsurface extraction tools.

Forced Evaporation

The remaining moisture is then dried with high-velocity air movers after as much water as possible has been removed.

If an object is wet or submerged in water it absorbs some moisture or water. The object becomes damp or wet due to this.

The level of saturation is described as the point where it is impossible to hold the moisture. The greater the humidity, the more close the air is to being saturated.

The evaporation phase is when water molecules change from a liquid state to a gaseous state. This process is known as evaporation.

In other words, the object does not absorb any more moisture from the atmosphere. This is known as the saturation point. Once saturation is reached, drying will begin.

High-efficiency air movers dry the object on two sides during the evaporation phase. They create strong airflow which is controlled by a filter system.

A fan that moves air can move 10 to 20 times more air than an ordinary household fan.

The item is dried using airmovers about 10 times faster than in the natural environment where no air mover was used.

High-velocity airflow dry the surface and absorbs moisture drawn out by the airflow.

Utilizing Heat To Aid In the Drying Process

A key component of any restoration project is heating. To dry out materials which have been affected by water, we use a number of different types of heaters.

Electric Heaters: These heaters may be used to dry tasks that require multiple heat sources. It is possible to run several heaters at once because of their numerous power ratings.

You can also reduce the electric heating while the job is being done, without affecting other heaters. In order to maximize efficiency and lower your energy bills it is possible to adjust the wattage of one heater, while also increasing its power.

Since they produce virtually no emissions and require very minimal water, electric heaters are very well-liked for restoration projects. The only downside is that they take longer to heat up, requiring longer drying time. process in general.

Hydronic Bioler (TES) They are also extremely efficient in heating up quickly yet releasing very little emissions. They can run on propane or natural gas.

Hydronic boilers differ from electric heat because they don’t use forced-air heat to disperse heat. This makes it difficult to evenly heat large areas by using these heaters. They also operate at less temperature, which makes them perfect for drying tasks that require ceilings and walls to remain in place.

In the event that electric heaters can’t be used, hydronic boilers can frequently be employed. They can produce radiant heat and can keep your drying area warm without the requirement of electricity.


To keep buildings and homes dry which have suffered damage due to water damage, we employ low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of water from damp structures that have suffered extensive water damage within 24 hours.

In addition to extracting water from the air as a LGR Refrigerant Dehumidifier does it, the dehumidifier for your home will also get rid of up to 99percent of mold spores that are airborne in the air, by removing condensation.

Repairing Wood Floor Water Damage

It is crucial to get rid of flooring that has been damaged by water to allow repairs to be made from the subflooring up.

The subflooring needs to be taken off and repaired before. Then the affected hardwood boards need to be sanded down or replaced. To ensure uniformity flooring, all floors should be sanded, then refinished after these repairs have been made.

Carpets are vulnerable to water damage

Floods can cause severe damages to your house and cause it to be expensive and time-consuming. Even if the water has been taken away from the affected area immediately, there is an opportunity that you will have to eventually replace the flooring.

After spending time and money to restore your home to original state, it could be devastating to find that the end result leaves an unsatisfactory impression.

It is vital to identify the extent of damage as soon as possible. The first thing to do is determine if the affected area requires replacement. It is possible to clean the carpet, then use it after drying. This will eliminate any concerns about mildew growth or lingering scents.

Salvaging Carpet After a Water Damage Event

You may notice stains on your carpeting , especially if the damage from water was severe. In some cases, you may need to change your flooring to get rid of these stains. Another factor that could cause you to think about replacing your carpet is the persistent and strong odor. It is necessary to replace your carpet padding and padding in the event of this.

Next, determine if your flooring can be dried professionally before you decide to change it. A professional service will aid you in determining the severity of the damage was. Our team will evaluate your carpet and determine whether it is best to replace it or re-usable. Keep in mind that some methods used for drying can also further damage the carpet even if it’s already in poor condition.

Some of the considerations which will decide whether or not the carpet and padding need to be replaced are:

Can your carpets be dried, cleaned and disinfected professionally?

The carpet’s capacity to remain clean is affected when the padding beneath it has been damaged. Although your carpet has been dried quickly, mildew growth is still possible if the padding underneath is not dried.

The most secure way to make sure that your carpet is cleaned and disinfected following flooding is to employ a professional carpet cleaning company. Once the cleaning is complete you’ll be able to make an informed decision on the condition of your carpeting. It is also possible to decide whether you want to replace it.

Drywall that has been damaged by water

The process for repairing drywall varies according to the extent of the damage. Repairing water damage is simple as taking out the drywall section then cleaning it and after that, replacing it.

The flip side of the coin is that major damage could require a complete replacement of the wall, which includes the wall studs and fiberglass insulation.

There are spores of mold in drywall damaged by water that is hard to get rid of. In most cases the drywall needs to be replaced. We employ moisture testing tools which allow us to identify how large and where the moisture has become. This helps us identify damaged areas and limit the cost to the only damaged ones.

Water can also cause structural damage because it causes the wood to expand or expand or contract. It is much more difficult to break wood if it is moistened by water. The wood may become brittle if it is left to dry in water for too long.


This problem can be avoided by homeowners and building owners taking immediate action to fix structural damage from moisture-related issues with their property after an event like a flood or damages caused by water.

Water Damage to the Foundation

There are many reasons water damage can cause to the foundation of a house. While not all issues with water result in structural damage, it’s critical to repair foundational problems as quickly as possible to avoid structural damage.

The water damage from foundations can result in a myriad of issues based on the way it is dealt with. If the damage is not addressed quickly, it could result in structural damage that is severe.


Roof Water Damage

Water damage to roofs can be caused by natural catastrophes as well as foundation water damage. Roof damage could cause roof leaks as well as damage the foundation of a structure or the foundation of a home.

Leaking roofs are costly and have serious disadvantages. Leaks in the roof could cause mildew and mold to develop, which could be fatal. Leaks in the roof may also cause damage to the roof truss system.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you do not take action immediately. Electrical faults are also common when it comes to roof water damage that can lead to an electrical fire. These are all good reasons to get roof water damage fixed quickly following a flood or other damage that is unexpected.

HVAC Water Damage

If your HVAC system is failing or brand new equipment is found to be inoperable, it can result in structural damage to your home. Without HVAC it is opening the interior of your business or home to all kinds of problems. The growth of mold can result in a range of very serious health problems.

Pipe Water Damage

If you’re experiencing pipe water damage, the water is most likely coming from a pipe that has burst in your home. When you’ve discovered that there has been a leak, it’s important to seek out professional assistance to stop the flow of water and make sure it doesn’t lead to structural damage.

Burst pipes can cause a lot of damage. When your pipes break and water enters your home, causing severe damage and requiring water damage repair – a process that can bring with it structural damages.

When you see water damage to your pipe that is not repaired, shut off the supply of water.

What’s the price to restore the water damage?

Water damage restoration cost per square foot

Based on the square feet, water damage repair and cleanup costs can vary. The following breakdown of pricing is available at National Flood Services for each square foot

Is water damage covered by homeowners’ insurance?

If the cause was sudden and unintentional the homeowners insurance policy typically cover the damage. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement of a broken window, but not if the damage occurs as a result of neglect.

Damage caused by neglect can be described as wear and tear of the surface or object because of exposure, insufficient preventative maintenance, or general degradation. According to the US-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

If the damage to your property resulted from flooding, the incident will not be covered under a homeowners policy. A flood policy is necessary. In some areas the flood policies are demanded by mortgage lenders. Flooding can occur due to storms, flooding ground and overflowing bodies or overflowing or surging bodies like streams, lakes, rivers and oceans.