Water damage restoration service – Escalle

Property owners in Escalle suffer water damage regularly. Whether you’ve experienced a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

The most common cause of water damage is when water gets into a structure or residence by way of a flood, storm, or ruptured pipe. Sometimes the damage is evident and obvious. Sometimes, the damage is more subtle or unreported.

The process of repairing water damage is more complex than just drying the interior. With modern professional techniques for water damage remediation typically restorers such as Critical Control can mitigate damage which previously would have required a complete structural replacement, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are readily available for your reference. Call an Professional

Many times, homeowners or builders attempt to repair water damage using DIY solutions that can be located on the internet. This is not advisable. There are guidelines for dealing with water damage and they depend on the equipment and expertise of professionals. These guidelines are detailed in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide exists because of the necessity of professional standardisation in situations involving water damage to buildings and homes and the risks they pose.

Critical Control, a restoration firm, is able to use IICRC guidelines to assess the type and extent of the damage each project has sustained.

There are many reasons that water damage professionals need to adhere to these guidelines. There are certain situations that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is someone who has the skills and training to evaluate the condition of a place collect samples, perform lab tests and provide us with advice regarding the kind of water damage that is likely to occur.

This is especially important in situations where the building’s occupants are at risk or there is concern regarding contamination.

Water damages caused through categorizes and classes


Restoration projects for water damage are classified by category and class, based on the degree of flooding of water.

The category has to do with how dirty the water entering the structure was. Category 1 water comes from a clean source such as the sink or tub, or a water source that bursts.

Category 2 water has the highest levels of contaminants. It can cause illness when it is ingested or contacted. This could include waters that are not readily apparent as a risk such as the effluent from washing machines, or the overflows from toilets.

Water in the category 3 is severely polluted, meaning it could contain pathogenic, toxic or other harmful substances in it. This can be caused by toilet trap leaks, and floods of water from streams and rivers. This water can be contaminated by pesticides, heavy metals or other toxic substances.


The IICRC has also created classes to follow when measuring the amount of water intrusion on your property. The system basically serves as an outline of how much saturated a structure or home should be.

Class 1 is the smallest amount of water and absorption. This is when water comes into contact with less than 5% of construction materials which absorb water. This is usually the case in which the majority of materials affected by water are low evaporation. This means they don’t soak up and hold water. Concrete, plaster, masonry, and coated or finished wood are only some of the examples.

Class 2 means that there is significant infiltration of water as well as intrusion. It means that anywhere between 5% to 40% of the floor, ceiling and wall is constructed of low-evaporation materials like plaster, concrete, wood or masonry.

Class 3 is the term used to describe 40 percent or more of wall, floor and ceiling materials are porous materials like fiberboard, insulation, carpet etc. Other materials, such as concrete and plaster that do not absorb water haven’t been affected in any way.

Class 4 means that water is stuck in materials that do not easily absorb water like plaster, wood, concrete and the masonry. This requires special drying techniques and longer drying times.

How do you dry a water Damaged House or Building


Three methods for removing water from buildings are physical extraction, dehumidification and the process of evaporation. The removal of liquid water is at least 500 times more effective than simply having to put up with dehumidifiers or air mover. The faster the structure is dried, the better. Both extraction and dehumidification methods will be affected by the amount of much stuff is being extracted.

Water damage experts employ an array of extraction techniques. We use a variety of tools , including self-propelled and subsurface extraction tools.

Forced Evaporation

The remainder of the moisture gets then dried with high-velocity air movers after as much water as possible has been removed.

Submerged objects absorb water and moisture when it’s moistened. The substance is then damp or wet as a result.

Saturation is defined as the point where it becomes unachievable for the air to contain any moisture. The greater the humidity, the closer the air is to saturation.

The evaporation stage is the time the moment when water molecules shift from a liquid state to a gaseous one. The process is referred to as evaporation.

In another way, the object will no longer absorb additional moisture from the atmosphere. The saturation point is the point at which evaporation begins. Once saturation is reached, drying begins.

In the evaporation phase, highly-efficient air moves dry the object on two sides. They create a strong airflow over the surface of the object, which is directed through a filter system that completely covers the surface of the object.

A fan that moves air can move between 10 and 20% more air than a fan, or even a regular fan in your home.

The object is dried by airmovers around 10 times faster that in the natural environment where no air mover was employed.

The high-speed airflow dry the surface and absorbs the moisture pulled away by the air mover.

Utilizing Heat to Aid the Drying Process

One of the most essential elements for any water damage restoration work is heating. We make use of a variety heaters to dry materials that are damaged by water.

Electric Heaters They are ideal for drying jobs which require the use of various heat sources. You can run multiple heaters at once because of their many Wattages.

Electric heat can also be adjustable, allowing it to be shut off or reduced during the process, without impacting your other heaters. This means that you could lower one heater, while increasing the wattage of another to maximize efficiency and lower expenses for energy.

Electric heaters are very common in restoration projects since they emit virtually no emissions and require very little water. The only issue is that they take longer to heat up, requiring longer drying time. process generally.

Hydronic Bioler (TES),: These boilers heat up quickly and release very little CO2. They are typically run with propane or natural gas.

Hydronic boilers differ from electric heat as they don’t make use of forced-air heat to distribute heat. This makes it difficult to heat large areas evenly using these heaters. They also run at a lower temperature, making them ideal for drying jobs that require walls and ceilings to remain in place.

In the event that electric heaters can’t be employed, hydronic boilers may typically be utilized. They can generate radiant heat and can keep your drying space warm without the need of an electric source.


To keep buildings and homes dry that are damaged due to flooding, we make use of Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier is capable of removing 170 pints of water from an un-dry structure which has been badly damaged by water damage every all day, every hour of the day.

In addition to removing water from the air, like an LGR Refrigerant Dehumidifier does it, the dehumidifier for your home will also get rid of as much as 99% of airborne mold spores the air through the elimination of condensation.

Fixing Hardwood Floor Water Damage

The floors that have been damaged by water need to be cut up to ensure repairs can take place starting from the subflooring up.

First, damaged subflooring needs to be removed and repaired. Next, the hardwood boards damaged need to be replaced or sanded. When the repairs are finished and the floor is finished, it should be sanded, refinished and polished to guarantee a uniform appearance.

Carpets are vulnerable to water damage

If you’ve experienced flooding in your house this can be a costly and stressful experience. Even if water is removed from the affected region immediately, there’s still a chance that you’ll have to replace your flooring eventually.

After spending time and money to restore your home to its original state, it could be devastating to find that the final results leave some things to be desired.

Because of this, it is essential to evaluate the extent of the damage as quickly as is possible. First thing to do is to determine if the damaged part requires replacement. It is possible to wash the carpet, then use it after drying. This can eliminate worries about the growth of mildew or persistent scents.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpeting , especially if the damage to your carpet was extensive. There are times when you have to change your flooring to remove these stains. A persistent, strong odor may also be the reason to replace your carpeting. You will need to replace your padding and carpet if this happens.

Next, determine if your floor can be dried professionally before you decide whether to replace it. If you’ve got a reliable company do the cleaning, then you will have a better idea of how severe the water damage was. We will be able to assess whether the carpet should be replaced or can be saved. Be aware that some methods used for drying can also harm the carpet further even if it’s already in poor condition.

A variety of factors can determine the need for padding or carpet need to be replaced.

  • What percentage of water did you see on your carpet?
  • How long did the water stay on the carpet?
  • What was the source of the water?

Are your carpets professionally cleaned, dried, and cleaned?

If the padding under your carpet is also damaged, it could affect the time that your carpet is clean. Even though your carpet may have been dried immediately, the possibility of mildew growth is still present if the padding beneath isn’t dried out as well.

The best way to be sure that your carpet is cleaned and disinfected following an event of flooding is to engage an expert carpet cleaning service. After the job is completed you’ll be able to make an informed decision on the state of your carpeting. You’ll also be able to determine whether to replace it.

Drywall damaged by water

The drywall repair procedure varies according to the extent of damage. Repairing water damage is as easy as removing an area of drywall cleaning it, then replacing it.

The other side is that major damage could require a complete replacement of the wall, which includes the wall studs and fiberglass insulation.

The spores of mold can be seen in water damaged drywall that is hard to get rid of. Most of the time the drywall needs to be replaced. We use moisture testing equipment which allow us to identify the extent to which moisture has become. This allows us to pinpoint damaged areas and limit the cost to the only damaged ones.

Water can cause structural damage as well, since it causes the wood to expand or expand or contract. It is much more difficult to break wood if it has been moistened with water. The wood can become brittle if it is allowed to dry in water for too long.


This problem can be avoided by owners of buildings and homeowners taking immediate action to fix water-related structural issues that affect their property after a flood or other water-related damage.

Water Damage to the Foundation

Damage to a home’s foundation can be caused by various reasons. While not all water concerns result in structural damage, it is crucial to address foundational issues in the quickest time possible to prevent structural damage.

Foundation water damage can lead to many different problems depending on how it is dealt with. It can cause severe structural damage if not addressed promptly.


Roof Water Damage

Like foundation water damage, roof water damage is quite common following natural catastrophes. Roof damage can cause roof leaks and also damage the foundation of a structure or house.

Leaking roofs are costly and have serious disadvantages. A leak in the roof may result in mold and mildew to develop, which could cause death. A roof that is leaky could affect the roof truss structure and cause structural damage to the roof.

If you don’t address leaks in your ceiling immediately, they can cause your rafters to degrade and become soft. Roof water damage can also result from electrical faults that can cause an electric fire. All of these are good reasons to have your roof water damage fixed quickly following a flood or other unexpected damage.

HVAC Water Damage

Your home can be damaged structurally if your HVAC system fails or faulty equipment is put in place. You are putting your home and business at risk by not having HVAC. Mold growth can occur and result in a range of very serious health problems.

Pipe water damage

Pipe water damage is usually caused by a burst pipe within your home. When you’ve identified an issue, it’s essential to contact a professional to stop the water from causing structural damage.

A burst pipe can cause severe damage. Water can enter your home via broken pipes, causing extensive damage. This could lead to structural damage.

Stop the water supply, and then contact an expert IICRC-certified specialist from a company for water restoration such as Critical Control as soon as you detect broken pipe water damage.

What’s the cost for the restoration of water damage?

Water damage restoration cost per square foot

Depending on the square foot, water damage repairs and cleanup expenses can vary. The following breakdown of pricing is available at National Flood Services for each square foot

  • Clean water category 1: $3.75/sq. ft.
  • Category 2 gray water: $4.50/ sq. feet.
  • Category 3 blackwater cost: $7/square. Ft.

Will Water Damage Be Covered by the homeowner’s insurance policy?

If the cause of the damage was accidental and sudden, homeowners insurance policies generally cover it. The Insurance Information Institute states that homeowners insurance will be used to pay for repairs or replacement of broken windows but not for damages due to negligence.

Neglect is defined as damage to a surface or an object that results from exposure, inadequate maintenance, or general wear and tear. The Insurance Information Institute in the US states that homeowners insurance does not cover damage caused by neglect.

If the damage to your property results from a flood, the event would not be covered by the homeowners insurance. Flood insurance is mandatory. In some areas, flood policies are required by mortgage companies. Flooding can happen due to storms, flooding the ground or overflowing bodies of water, or overflowing or surging bodies like rivers, lakes, streams and oceans.