Flood damage restoration service – Fallon

Property owners in Fallon experience burst pipe damage regularly. Whether you’ve experienced a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

If a storm, flood or burst pipes cause water to seep into a home or structure water damage can occur most of the time. Sometimes the damage is visible and obvious, sometimes it’s subtle or even hidden.

It’s more complex than simply drying the interior to fix water damage. With modern professional methods for water damage restoration Restoration companies like Critical Control can mitigate damage which previously would have required complete structural replacement, in terms of demolition and rebuild.

Water Damage Restoration Guidelines are readily available for your reference. Call an Professional

A lot of times, property or home owners attempt to address water damage with DIY solutions that can be found on the internet. This is inadvisable. Water damage can be controlled according to established guidelines. These guidelines demand the skills and tools of experts. These guidelines can be found in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure that there is a professional standardisation for situations involving water damage to structures or homes, as well as the risks associated with it.

Critical Control, a restoration company, can use the IICRC guidelines to evaluate the severity and nature of each project’s damage.

These guidelines are essential for water damage professionals. There are instances that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is a person with the knowledge and experience to analyze the condition of a place, take samples, run lab tests and provide us with advice regarding the nature of the water damage.

This is especially important in cases where the building’s occupants are in danger or there is concern regarding contamination.

Water damages caused by categories and classes


Projects for water damage restoration are divided into two categories, depending on how extensive the infiltration of water is.

The class has to do with how contaminated the water that enters the structure is. Category 1 implies that the water comes from a clean source such as burst water supply, or even a sink or tub.

Category 2 involves water that has significant levels of contaminants and is likely to cause discomfort of illness if contacted or consumed. The sources could be water that is not obvious as a danger like the discharge from washing machines or spills from toilets.

Category 3 water is grossly contaminated meaning that it can contain toxic, pathogenic, or other harmful agents in it. This could be due to backflows of sewage, toilet trap leaks, and the flooding of rivers and streams. The water in this category could have pesticides, heavy metals and regulated substances as well as toxic chemicals in it.


The IICRC has also developed classes we use in determining the level of water intrusion into your property. This system is basically a guideline for the amount of water a building or home should be.

Class 1 refers to the lowest amount of water and absorption. This is when water is in contact with less than 5% construction substances that absorb water. This is because the majority of substances affected by water won’t hold or absorb water. Examples are concrete, finished/coated wood, plaster or masonry.

Class 2 indicates that there is significant absorption of water and intrusion. This is about 5 to 40% of combined ceiling, floor, and wall consist of low evaporation materials such as plaster, concrete, wood, or masonry.

The porous materials, like fiberboard, insulation and carpet, that make up Class 3 comprise around 40 percent of wall, floor and ceiling materials, including approximately 40% of the materials in Class 3. Other materials such as cement or plaster that don’t absorb water have not been adversely affected.

Class 4 refers to the fact that water has become deeply bound in materials that do not readily absorb water, such as wood, plaster, concrete and bricks and mortar. This requires special drying techniques and longer drying times.

How Drying a Water Damaged home or Building Works


Three methods for removing water from buildings include physical extraction, dehumidification, and the process of evaporation. Removal of liquid water is at minimum 500 times more efficient than simply making do with dehumidifiers and air movers. The faster the structure is dried, the better. The quantity of materials to be extracted will influence both extraction and dehumidification techniques.

Professionals dealing with water damage use a variety techniques. Our tools include wands, subsurface extraction tools as well as self-propelled tools and vacuum squeegees.

Forced Evaporation

The remainder of the moisture gets dried by high-speed airmovers after as much water as possible is taken away.

When an object is moistened or submerged in water it absorbs some water or moisture. As a result, the material becomes dampened or wet.

The degree of saturation is referred to as the point where it is impossible to hold any additional moisture. More humid means that the air is closer to saturation.

The evaporation process occurs the moment when water molecules shift from the state of liquid to a gaseous state. This is called the process of evaporation.

In this way it is does not absorb any more moisture from the air. The saturation point is the point at which evaporation begins. Once saturation is reached, drying begins.

High-efficiency air movers dry objects in two areas during the evaporation process. They create strong airflow which is controlled by a filtering system.

Air mover can move 10-20 times more air than a fan or an ordinary household fan.

Air movers dry the object approximately 10 times faster than normal conditions, when there isn’t any air mover.

A high-velocity airflow is able to dry the surface and sucks up the moisture that has been drawn away by the air movers.

Utilizing Heat to Aid The Drying Process

A key component of any restoration is heating. We use a variety of heaters to dry out materials that are damaged by water.

Electric Heaters These heaters are perfect for drying tasks which require the use of multiple heating sources. You can run multiple heaters simultaneously due to their many wattages.

You can also reduce or off electric heat when the task is completed, but without impacting other heaters. This means that you can lower one heater, while raising the wattage of another to maximize efficiency and lower cost of energy.

Electric heaters are a common feature in restoration projects because they produce essentially no emissions and require minimal amounts of water. The only downside is that they take longer to heat up, requiring longer drying time. process in general.

Hydronic Bioler (TES) Hydronic Bioler (TES) These boilers are able to heat quickly and emit very little carbon dioxide. They typically operate with propane or natural gas.

Hydronic boilers are different from electric heating in the sense that they don’t make use of forced air to distribute heat, so it can be difficult to evenly heat a large space with these kinds of heaters. They can also be used for dry work that does not require walls or ceilings to be able to stand in the same place.

They are also commonly employed when there isn’t enough electricity to run electric heaters. Because they are so efficient in producing radiant heat, they are able to easily keep your drying space warm, even without an electric power source.


To dry buildings and houses which have suffered damage due to flooding, we employ Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of moisture from damp structures which have suffered massive water damage in just 24 hours.

The home dehumidifier can extract water from the air the same way it does an LGR Refrigerant Dehumidifier. It can also get rid of the 99 percent or more of the airborne mold spores by eliminating condensation.

Repairing Hardwood Floor Water Damage

It is important to remove the hardwood floors that have been damaged by water to ensure that repairs can be completed by removing the subflooring.

First, damaged subflooring needs to be taken off and fixed. The affected hardwood floors need to be sanded down or replaced. To ensure a uniform appearance, all floors should be sanded down and restored after the repairs are completed.

Water Damage To Carpeting

If you’ve had the misfortune of experiencing a flood in your home, it can be a stressful and expensive experience. Even if the water is eliminated from the area immediately, there is an opportunity that you’ll need to replace the flooring in the future.

After investing time and money in restoring your home to pre-flooding condition, it will be depressing to discover that the finished results leave an unsatisfactory impression.

Because of this, it is essential to evaluate the extent of damages as soon as you can. The first thing to do is determine if the affected area needs to be replaced. There is a way to clean the carpet and then use it again after drying. This can alleviate any concerns about mildew growth or persistent scents.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting , especially if the damage from water was severe. In some cases the only solution to get rid of these stains is to replace the flooring. Another aspect that may prompt you to think of replacing your carpet is the persistent and strong scent. It is necessary to change your carpet and padding when this happens.

The next step in determining whether or not you’ll need to replace your carpet is to assess if the floor can be cleaned and dried professionally. Professionals can assist you in determining how severe the damages were. We can evaluate whether or not your carpet should be replaced or can be saved. If the carpet you have is in poor shape, some drying methods can cause further damage to it.

Many factors determine the decision of whether padding or carpet need to be replaced.

Do your carpets get professionally cleaned, dried and disinfected?

The carpet’s ability to remain fresh can be compromised if the padding underneath it is damaged. Although your carpet might have been dried immediately but the chance of mildew growth is still present if the padding under isn’t dried too.

The most secure way to make sure that your carpet is cleaned and disinfected following an event of flooding is to engage an expert carpet cleaning service. Once the work is done, you’ll be able make an informed decision on the condition of your carpet. It is also possible to decide whether to replace it.

Water Damaged Drywall

The extent of damage will determine the type and way to repair drywall. Repairing water damage could be as easy as removing a portion of drywall, cleaning the area, and then putting it back.

On the other hand of the coin, severe damages could necessitate a total wall replacement, including the wall studs as well as fiberglass insulation.

Water damaged drywall often harbors mold spores that cannot be removed easily. So in most cases the drywall needs to be replaced. We employ moisture testing instruments to measure the amount of moisture. This helps us identify damaged areas and limit costs to only the areas that are damaged.

Water also causes structural damage because it causes the wood to expand and shrink. It is much more difficult to break wood when it has been moistened by water. The wood can become brittle if it is kept in the water for too long.


To avoid this problem, it’s essential to homeowners and property owners to address structural damages from moisture-related problems with their property immediately after the water or flood incident.

Foundation Water Damage

The damage caused by water to a house’s foundation can be caused by various reasons. While not all water concerns result in structural damage, it’s critical to repair foundational problems in the quickest time possible to avoid potential structural damage.

The damage caused by water in the foundation could cause many different problems dependent on the way it is addressed. It can lead to serious structural damage if the issue isn’t addressed promptly.


Roof Water Damage

Roof water damage can also be caused by natural disasters similar to foundation water damage. Along with creating roof leaks damage can also result in issues with the walls and foundation of a home or the building.

Leaking roofs are costly and may have significant drawbacks. Roof leaks can result in the growth of mold that could be fatal. Leaks in the roof may also cause damages to the roof truss.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you don’t deal with them right away. Water damage to the roof could result from electrical issues, which can lead to the possibility of an electric fire. All of these are excellent reasons to have roof water damage fixed quickly following a flood or other unexpected damage.

HVAC Water Damage

If your HVAC system begins to fail or brand new equipment becomes defective, it could result in structural damage to your home. Without HVAC, you are exposing the inside of your business or home to all kinds of problems. It is possible for mold to grow and lead to a number of very serious health problems.

Water damage to pipes

Damage to pipes typically caused by a burst pipe within your home. If you’ve discovered leak, it’s crucial to get a professional to stop the water from causing structural damage.

A ruptured pipe can result in serious damage. Water can enter your home through damaged pipes, causing severe damage. This could lead to structural damage.

Turn off the water supply and then call an experienced IICRC-certified professional at a water restoration firm such as Critical Control as soon as you spot broken pipes or water damage.

What’s the cost for cleaning up water damage?

Water damage restoration cost per square foot

Based on the square foot the repairs and cleanup expenses differ. The following pricing breakdown is available at National Flood Services for each square foot

Can Water Damage be covered By the Homeowner’s Insurance?

Insurance policies for homeowners are typically applicable if the source of the damage is sudden and accidental. The Insurance Information Institute states that homeowners insurance can be used to pay for repairs or replacement of windows that have been damaged however, it does not cover damage due to negligence.

Neglect can be described as damage to a surface or an object that is caused by exposure, inadequate maintenance, or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance does not cover damage caused by negligence.

If the water damage is the result of an event that is a flood, it will not be covered under the homeowners insurance. The flood insurance policy is mandatory. Mortgage lenders might require flood insurance in some regions. Flooding can be caused by storms, flooding ground, overflowing bodies of water, or overflowing or surging bodies such as streams, rivers, lakes and oceans.