Water damage restoration service – Giant

Property owners in Giant experience burst pipe damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

Water damage is more common when water enters a building or residence by way of a flood, storm, or burst pipes. Sometimes the damage is apparent and obvious. Other times, it’s more subtle or unreported.

The process of repairing water damage is more complex than simply drying the interior. Modern techniques for water damage remediation typically restorers such as Critical Control can mitigate damage that, in the past, would have required complete structural replacement, that is to say, in other words, demolish and rebuild.

Water Damage Restoration Guidelines are readily available – Call a Professional

Many times, building or home owners attempt to deal with water damage by using DIY solutions found online. This isn’t a good idea. There are guidelines to deal with water damage and they call on the skills and tools of professionals. The guidelines are laid out in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is necessary to ensure professional standardisation of scenarios involving water damage houses or buildings, and the risk associated with it.

The IICRC guidelines help restoration professionals like Critical Control to evaluate the category and class of damages on every project.

These guidelines are crucial for professionals who deal with water damage. There are instances that require us to bring in an Indoor Environmental Professional (IEP). An IEP is someone who has the expertise and experience to analyze the condition of a place, take samples, run lab tests, then provide us with advice regarding the kind of water damage that is likely to occur.

This is particularly important in cases where the building’s inhabitants are at risk or are concerned regarding contamination.

Water destruction caused through types and classes


Restoration projects for water damage are classified into categories and class based on the degree of invasion of water.

The water that entered the building was classified based on its contamination. Category 1 implies that the water originates from a clean source such as burst water supply, or even a sink or tub.

Category 2 water has the highest levels of contaminants. It could cause illness if it is consumed or in contact with. These sources can be waters that are not readily apparent as a risk such as the effluent from washing machines or overflows from toilets.

Water in the category 3 is severely contaminated meaning that it can have pathogenic, toxigenic or other harmful substances in it. Most often, this is due to contamination by the backflow of toilets from the trap for toilets and seawater, flooding from streams and rivers, or any other water arising from the building exterior. This category of water can have pesticides, heavy metals, regulated materials or toxic substances within it.


It is also possible to use the IICRC’s classes to determine just how much water has penetrated your property. This system basically sets guidelines for the level of saturation of the building or home.

The lowest amount of absorption by water and the most water is classified as Class 1. It is the case when water comes in contact with around 5percent or less of building materials that absorb water. This is because the majority of materials that are affected by water don’t retain or absorb water. Examples include concrete, coated or finished wood, masonry or plaster.

Class 2 refers to water absorption and intrusion. This means that between 5 to 40% of the floor, ceiling and wall is constructed from low-evaporation substances like plaster, concrete, wood, or bricks and mortar.

Class 3 is the term used to describe 40% or more of the flooring, walls and ceiling materials are porous materials such as fiberboard, insulation, carpet and so on. and other materials that don’t take in a lot of water, such as concrete or plaster haven’t been negatively affected.

Water has been absorbed by materials like concrete, plaster, and wood, which are classified as Class 4. This requires special drying techniques and longer drying time.

How do you dry a water damaged building or house


Physical extraction, dehumidification, and evaporation are three methods to remove water from buildings. The removal of liquid water is at about 500 times more efficient than just making do with dehumidifiers and air mover. The quicker the structure can dry the more effective. The quantity of materials to be extracted will influence the extraction process as well as dehumidification methods.

Professionals dealing with water damage utilize a variety of extraction methods. We make use of a variety of equipment, such as subsurface extraction tools and self-propelled tools.

Forcible Evaporation

Once all water is removed, any remaining moisture is dried using high-velocity airmovers.

If an object is wet or submerged in water it absorbs a portion of the moisture or water. The result is that the material gets dampened or wet.

Saturation is defined as the point at which it becomes impractical for air to hold any moisture. More humid means that the air is getting closer to saturation.

In the evaporation stage the water molecules leap from liquid state to gaseous state. This process is known as evaporation.

In this way it is no longer absorbs additional moisture from the air. This is known as the saturation point. When saturation is reached, drying begins.

High-efficiency air movers dry the object in two areas in the evaporation phase. They produce a powerful airflow across the surface of the object, which is directed by a filter system that covers the entire area of the object.

An air mover can move between 10 and 20 percent more air than a fan, or a standard fan in your home.

The object is dried by airmovers about 10 times faster than in natural conditions where no air mover was used.

A high-velocity airflow dries the surface and absorbs the moisture taken away by the air movers.

Utilizing Heat to Aid the Drying Process

A key component in any water damage restoration work is the use of heat. To dry out materials which have been affected by water, we employ various types of heaters.

Electric Heaters: Electric heaters are great for drying tasks which require the use of various heating sources. It is possible to run several heaters simultaneously because of their many Wattages.

Electric heat is also able to be shut off or reduced while the job is in process, without affecting your other heaters. In order to maximize efficiency and lower your energy bills you can alter the wattage of one heater while increasing it’s wattage.

Electric heaters are a common feature in restoration projects because they produce essentially zero emissions and consume minimal amounts of water. They require longer to warm up and need longer drying time.

Hydronic Bioler (TES) Hydronic Bioler (TES) These boilers are able to heat quickly and release very little CO2. They can run on propane or natural gas.

Hydronic boilers differ from electric heat in the sense that they don’t use forced-air to distribute heat, so it can be difficult to evenly heat a large space with these kinds of heaters. They are also able to dry jobs that do not require ceilings or walls to remain in the same place.

Hydronic boilers are often used in situations where there is no power available to power electric heaters. Because they’re so effective in producing radiant heat they are able to keep your drying area warm even when there is no electric power source.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to help dry out buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can remove 170 pints of water in a damp structure that has been severely damaged by water damage every 24 hours.

The home dehumidifier can extract water from the air the same way as an LGR Refrigerant Dehumidifier. It will also get rid of the 99 percent or more of the airborne mold spores by eliminating condensation.

Repairing Hardwood Floor Water Damage

It is important to remove the hardwood floors that have been damaged by water to allow repairs to be done by removing the subflooring.

Subflooring that is damaged first has to be removed and repaired. After that, the hardwood flooring damaged need to be replaced or sanded. In order to ensure a uniform appearance, all floors should be sanded down and repaired after these repairs have been completed.

Carpets are susceptible to water damage

Floods can cause significant damages to your house and cause it to be difficult and expensive. You may need to replace your flooring even if you’ve removed the water from the area as soon as is possible.

After investing time and money in restoring your home to pre-flood condition, it would be devastating to find that the end result leaves some things to be desired.

It is crucial to determine the extent of damage as soon as is possible. First thing to do is determine if the affected area needs to be replaced. It is possible to wash the carpet and then use it once dry. This will eliminate any concerns about mildew growth or lingering odors.

Salvaging Carpet After a Water Damage Event

If the damage from water is very extensive, it is possible that you’ll notice marks on your carpet. In some cases, you may need to replace your flooring to remove the stain. A strong, lingering odor could also be a reason to change your carpet. You will need to replace your carpet padding and padding in the event of this.

Then, consider if your floor can be professionally dried before deciding whether you want to repair it or replace it. If you have an established company that can handle the cleaning, you’ll be able to determine how severe the water damage was. We can determine if the carpet should be replaced or saved. If your carpet is already damaged, certain drying techniques can further damage it.

A variety of factors can determine the need for padding or carpet need to be replaced.

Are your carpets dry or cleaned professionally?

The carpet’s capacity to remain fresh can be compromised if the padding beneath it has been damaged. Although your carpet might have been dried immediately however the risk of mildew growth is still present if the padding beneath it has not dried out as well.

A professional carpet cleaning company is the best option to make sure your carpeting is dry and clean following a flood. Once the cleaning is complete then you’ll have the ability to take a shrewd decision on the condition of your carpeting. You’ll also be able to determine whether you want to replace it.

Water Damaged Drywall

The procedure for repair of drywall differs depending on the severity of the damage. Repairing water damage can be as easy as removing a portion of drywall, cleaning the area, and then replacing it.

The opposite of this is that major damage could need to be repaired completely, including fiberglass insulation and wall studs.

There are spores of mold in drywall damaged by water that is difficult to eliminate. Therefore, in the majority of cases the drywall needs to be replaced. We employ moisture testing instruments to determine the amount of moisture. This allows us to pinpoint damaged areas and limit the cost to only the areas that are damaged.

Water can cause structural damage as well, as it causes the material to expand or shrink. It is much easier to break wood when it has been moistened by water. The wood will be brittle if allowed to dry in water for too long.


To avoid this problem, it’s crucial for homeowners and building owners to address structural damages from the effects of moisture on their home immediately following the water or flood occasion.

Water Damage to the Foundation

Damage to a home’s foundation can occur for many reasons. While not all issues with water cause structural damage, it is critical to repair foundational problems as quickly as possible to avoid potential structural damage.

The damage caused by water in the foundation could cause various issues dependent on the way it is addressed. It could cause serious structural damage if it isn’t addressed promptly.


Roof Water Damage

Damage to the roof can be caused by natural catastrophes, just like foundation water damage. Roof damage can cause roof leaks as well as damage the foundation of a building or house.

Roof leaks can be very costly and might have significant negatives. Leakage in the roof could lead to mold growth and can be fatal. A leaking roof may also affect the roof truss structure, which can cause structural damage to the roof.

Leaks from the ceiling could cause your rafters’ to degrade and become soft if you don’t address them immediately. Electrical faults are also common in roof water damage, that can lead to an electrical fire. There are many reasons to get roof water damage taken care of quickly after a flood or any other unexpected damage.

HVAC Water Damage

Your home could be damaged by structural damage if the HVAC system is not working properly or the wrong equipment is installed. You are putting your business and home at risk in the absence of HVAC. It can lead to serious health problems.

Pipe water damage

If you’re suffering from pipe damage due to water, it will likely be coming from a pipe that has burst in your home. If you’ve determined there has been a leak, it’s important for you to contact a professional to stop the water and ensure it doesn’t lead to structural damage.

A burst pipe can cause serious damage. The water could enter your home through damaged pipes, causing extensive damage. This could lead to structural damage.

If you spot broken pipe water damage close off the water supply.

What is the cost of the restoration of water damaged?

Water damage restoration cost per square foot

Based on the square foot the water damage repair and cleanup costs vary. National Flood Services has the following breakdown of pricing per square foot.

Are water damages covered by homeowners’ insurance?

If the cause was accidental and sudden, homeowners insurance policies typically cover the damage. The Insurance Information Institute states that homeowners insurance will provide for the repair or replacement of windows that have been damaged, but not for damage caused by neglect.

Damage from neglect could be defined as wear and tear of a surface or object because of exposure, lack of regular maintenance or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance does not cover damage from neglect.

If the damage to your property is the result of an event that is a flood, it would not be covered by the homeowners insurance. A flood policy would be mandatory. In some areas where flood insurance is required, it’s usually by mortgage lenders. Flooding can be caused by storms, flooding the ground or overflowing bodies of water, or overflowing or surging bodies such as rivers, lakes, streams and oceans.