Flood damage restoration service – Guadalcanal Village

Homeowners in Guadalcanal Village get hit with flood damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water gets into a structure or home through a storm, flood, or burst pipe. Sometimes the damage is overt and obvious, but sometimes it is minor or hidden.

It’s more difficult than just drying the interior to repair water damage. Modern professional techniques for water damage repair, such as Critical Control, can often reduce damage that would normally have required total structural replacement.

Water Damage Restoration Guidelines are readily available – Call a Professional

Many times, homeowners or builders attempt to repair water damage with DIY solutions found online. This isn’t a good idea. Water damage can be controlled in accordance with the established guidelines. These guidelines require the knowledge and skills of professionals. The guidelines are set forth in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the necessity for professional standardisation of situations that involve water damage to buildings and homes as well as the risk they create.

Critical Control, a restoration company, can use the IICRC guidelines to evaluate the severity and nature of the project’s damages.

These guidelines are crucial for professionals who deal with water damage. There are situations that warrant the use of the services of an Indoor Environmental Professional (IEP). An IEP is professional with the training to assess a site for contamination take samples, perform lab testsand advise us on the category of water damage.

This is crucial in cases where the building’s occupants are at high risk or have concerns about contamination.

Water destruction caused according to categorizes and classes


Water damage restoration projects are classified according to category and class, based on the extent of the invasion of water.

The water that entered the structure was classified based on the degree of contamination. Category 1 is water that comes from a clean source such as a tub or sink or a burst water supply.

Category 2 water has the highest levels of contaminants. It can cause illness if it is inhaled or touched. This could include water that isn’t obvious as a threat such as the effluent from washing machines, or the overflows from toilets.

Water in the category 3 is severely contaminated meaning that it can have pathogenic, toxigenic or any other harmful agent in it. This usually means contamination by toilet backflows following the trap for toilets, seawater, water flooding from rivers and streams or any other water flowing from the building exterior. This water may be contaminated by pesticides, heavy metals or harmful substances.


The IICRC has also developed classes to follow when determining the degree of water intrusion to your property. This is basically a guideline for how saturated a building or house should be.

Class 1 is the smallest amount of water and absorption. This happens when water is in contact with less than 5% construction materials that absorb water. This is because the majority of materials that are affected by water don’t retain or absorb water. Concrete and masonry, as well as plaster and wood that has been finished/coated are several examples.

Class 2 indicates that there is substantial absorption of water and intrusion. This means that between 5 to 40% of the combined floor, ceiling and wall is constructed from low-evaporation substances like plaster, concrete, wood or bricks and mortar.

The porous materials, like carpet, insulation and fiberboard that comprise the class 3 make up around 40% of floor, wall and ceiling materials, with about 40% in class 3. and also where other materials that do not take in a lot of water, such as plaster or concrete have not been adversely affected.

Water has been absorbed into materials like concrete, plaster, and wood that are classified as Class 4. This is why special drying methods are required and longer drying times.

How do you dry a water Damaged House or Building


Three ways of removing water from buildings are physical extraction, dehumidification and evaporate. The removal of liquid water is at least 500 times more effective than just putting up with dehumidifiers and air movers. The quicker the structure dries the better. The extraction method and the dehumidification process will be affected by how much stuff is being extracted.

Water damage professionals use an array of extraction techniques. We use a variety of equipment, such as subsurface extraction tools as well as self-propelled tools.

Forced Evaporation

The remaining moisture is dried with high-velocity air movers after the maximum amount of water has been taken away.

When an object is moistened or submerged in water, it absorbs some of the moisture or water. The substance becomes damp or wet due to this.

Saturation is defined as the point where it becomes unachievable for the air to contain any moisture. The higher the humidity, the closer the air is getting to saturation.

In the evaporation phase in which water molecules are ejected from a liquid to a gaseous state. This process is known as evaporation.

This means that the object is no longer able to absorb water from the atmosphere. We call that saturation point the point of evaporation. Once saturation has been reached, the drying process begins.

In the process of evaporation, highly-efficient air moves dry the object on two sides. They produce a powerful airflow over the surface of the object which is directed through a filter system that completely covers the surface of the object.

A fan that moves air can move between 10 and 20 percent more air than an ordinary fan, or a standard fan in your home.

Airmovers dry the object approximately 10 times faster than in natural conditions, where there is no air movement.

A high-velocity airflow dries the surface of the object and draws in the water that was pulled out by the air movers.

Make use of heat to help in the drying process

Heat is an important component of any restoration task. We make use of a variety heaters to dry the materials that have been damaged by water.

Electric Heaters: Electric heaters are great for drying jobs that require multiple heating sources. This is because they are available in several different energies, which lets you operate multiple heaters at once.

Electric heat is also able to be reduced or turned off when the work is in process, but without impacting other heaters. This means you can turn one heater down while increasing the power of another one to improve efficiency and lower expenses for energy.

Electric heaters are very common in restoration projects since they emit virtually no emissions and use very little water. They take longer to warm up and need more time to dry.

Hydronic Bioler (TES) Hydronic Bioler (TES), These boilers heat up quickly and emit very little emissions. They typically operate on natural gas or propane.

Hydronic boilers are different from electric heating in that they don’t make use of forced air to distribute heat. Therefore, it may be challenging to evenly heat an area using these kinds of heaters. They also operate at an lower temperature, making them ideal for drying jobs that require ceilings and walls to remain in place.

In the event that electric heaters can’t be employed, hydronic boilers may typically be utilized. Because they are extremely efficient in producing radiant heat, they are able to keep your drying space warm even without an electrical power source.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to keep buildings dry and homes that have experienced water damage.

The LGR Home Dehumidifier can remove 170 pints of moisture from damp structures which have suffered severe water damage within 24 hours.

In addition to extracting water out of the air, such as an LGR Refrigerant Dehumidifier does, the home dehumidifier will also remove up to 99% of mold spores that are airborne in the air, by removing condensation.

Repairing Hardwood Floor Water Damage

It is crucial to get rid of flooring that has been damaged by water to allow repairs to be made from the subflooring up.

First, damaged subflooring needs to be removed and replaced. The damaged hardwood boards need to be sanded down or replaced. When the repairs are finished, the entire floor should be sanded, refinished and polished to ensure a uniform appearance.

Carpets are susceptible to water damage

If you have had the misfortune of experiencing a flood in your home it could be a stressful and expensive experience. Even if the water is removed from the affected area right away, there’s an opportunity that you’ll need to replace your flooring eventually.

It’s devastating to discover that your home isn’t in the best condition after you have spent many hours and dollars to restore it.

In this regard, it is essential to evaluate the severity of the damage as quickly as is possible. One of the first issues to address is whether or not the damaged region should be replaced. It is possible to wash the carpet and then use it after drying. This can alleviate any worries about the growth of mildew or lingering odors.

Salvaging Carpet After a Water Damage Event

If the water damage is severe there is a chance that you’ll notice marks on your carpet. In certain instances, the only way to eliminate the stains is to replace the flooring. A strong, lingering odor could also be a reason to replace your carpeting. It’s time to replace your padding and carpet when this happens.

Next, determine if your flooring can be dried professionally before you decide to replace it. A professional company can aid you in determining the severity of the damage was. We will be able to determine if your carpet should be replaced or can be saved. If your carpet is damaged, certain drying methods can cause further damage to it.

A few of the factors which will decide whether or not the carpet and padding should be replaced include:

Are your carpets dry or cleaned professionally?

If the padding beneath your carpet is damaged, this can affect the time that your carpet will remain clean. Even though your carpet may be dry but the chance of mildew development is there if the padding underneath isn’t dried out as well.

A professional carpet cleaning company is the most effective way to ensure your carpet is clean and dry after the flood. Once the cleaning is complete, you’ll be able make an informed decision about the condition of your carpeting. You’ll also be able to determine whether to replace it.

Drywall damaged by water

The procedure for repair of drywall differs according to the extent of damage. Water damage repair can be as easy as removing a section of drywall cleaning it, after that, replacing it.

The opposite of this is that major damage could need to be repaired completely, including fiberglass insulation and wall studs.

The drywall that is damaged by water usually harbors mold spores which can not be easily removed. In most instances the drywall needs to be replaced. We employ moisture testing tools that allow us to determine how large and where the moisture has become. This helps us identify damaged areas and limit the cost to only the areas that are damaged.

The water can also cause structural damage because it causes the material to expand and expand and contract. When the wood is saturated with water, it’s much more difficult to break. If the water remains for a prolonged time, there could be a significant amount of rot in the wood, which could make it break easily.


This problem can be avoided by building owners and homeowners making immediate changes to repair structural damage from moisture-related problems with their property following an event like a flood or water damage.

Water Damage to the Foundation

The damage caused by water to a house’s foundation can happen due to various reasons. While not all water issues can lead to structural damage, it’s important to address foundation issues as quickly as is possible in order to avoid any further structural damage.

Water damage to the foundation can trigger many different problems dependent on the way it is addressed. It can cause severe structural damage if the issue isn’t addressed quickly.


Roof Water Damage

Like foundation water damage, roof water damage is also fairly common after natural disasters. As well as the possibility of roof leaks, roof damage can cause issues with the walls and foundations of a construction.

Roof leaks can be costly and may have significant drawbacks. A leak in the roof could result in mold and mildew to grow, which can be fatal. Leakage in the roof can also cause damage to the roof truss system.

Leaks from the ceiling could cause your rafters to decay and become soft if you don’t take action immediately. Roof water damage can also be caused by electrical faults which could lead to an electrical fire. All of these are good reasons to get roof water damage taken care of immediately following a flood, or other sudden damage.

HVAC Water Damage

Your home can be damaged structurally if your HVAC system fails or faulty equipment is installed. If you do not have HVAC, you are exposed to the interior of your business or home to all sorts of issues. It is possible for mold to grow and cause a variety of health issues that are very serious.

Damage to Pipes from Water

Damage to pipes typically caused by a burst pipe within your home. Once you’ve determined there’s leak, it’s important to call an expert to stop the water from damaging the structure.

Burst pipes can cause a number of damages. When pipes are damaged they can let water into your home, causing severe damage and requiring repair of water damage. This is which can result in structural damage.

As soon as you notice damaged water pipes, shut off the water supply.

What is the cost to repair water damage?

Water damage restoration cost per square foot

Water damage cleanup and repair cost will differ based on how many square feet you have. National Flood Services has the following breakdown of pricing per square foot.

Are water damage covered By Homeowner’s Insurance?

If the cause was accidental and sudden homeowners insurance policies will usually cover it. According to the Insurance Information Institute, homeowners insurance can cover repairs or replacement for a damaged window, but not if the damage occurs as a result of negligence.

Damage from neglect may be defined as wear and tear of a surface or object due to exposure, lack of regular maintenance or general wear and tear. The Insurance Information Institute in the United States states that homeowners insurance does not cover damage caused by neglect.

A homeowners policy would not cover water damage due to flooding. The flood insurance policy is mandatory. In some areas the flood policies are demanded by mortgage companies. Flooding may occur because of storms, over-saturated ground, overflowing or surging bodies of water like lakes, rivers, ponds, streams, oceans when combined with strong winds.