Water damage restoration service – Harry Floyd Terrace

Property owners in Harry Floyd Terrace experience flood damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

When a storm, flood or burst pipes cause water to seep into a home or structure water damage is more often than not. Sometimes the damage is evident and apparent. In other instances, it’s subtle or under-reported.

Water damage remediation is much more complex than just drying out the interior. Modern water damage remediation techniques, such as Critical Control, can often minimize damage that otherwise would need a total structural replacement.

Water Damage Restoration Guidelines are available Contact a Professional

A lot of times, homeowners or builders try to fix water damage by using DIY solutions that can be found on the internet. This is a mistake. There are guidelines for dealing with water damage and they depend on the equipment and expertise of experts. These guidelines can be available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. The guide was created due to the need for professional standards in cases involving water damage to buildings and homes and the dangers they can create.

The IICRC guidelines aid restoration experts like Critical Control to evaluate the kind and severity of the damage to each project.

There are really important reasons why professionals dealing with water damage should adhere to these guidelines. In some situations there are situations where an Indoor Environmental Professional (IEP) is required. An IEP is a person with the knowledge and experience to analyze an area for contamination collect samples, perform lab tests and provide us with advice regarding the nature of the water damage.

This is particularly important in cases where the building’s inhabitants could be high risk, there is a likelihood of adverse health effects, the occupants have a desire to know the suspected contaminants or any other reason to raise concern over contamination.

Water damages caused by categorizes and classes


Restoration projects for water damage are divided into two categories, depending on how extensive the water infiltration is.

The water that entered the structure was classified according to the degree of contamination. Category 1 is water that is clean, such as an unclean sink or tub, or burst water supply.

The category 2 water has significant levels of contaminants and is likely to cause discomfort of illness should it be consumed or ingested. These sources can be water that isn’t obvious as a threat like the discharge from washing machines and overflows from toilets.

Water in Category 3 can be considered extremely polluted. It could contain toxic, pathogenic, or any other harmful substances. It can be caused by sewage backflows, toilet trap leaks, and water flooding from rivers and streams. This water can be contaminated by pesticides, heavy metals or toxic substances.


The IICRC has also created classes we use in measuring the amount of water intrusion on your property. The system is basically a set of guidelines for the level of saturation of the structure or the home.

Class 1 is the smallest amount of absorption and the amount of water. It is the case when water is in contact with about five percent or less building materials that absorb water. This is because most substances affected by water don’t absorb or hold water. Concrete or plaster, masonry and finished/coated wood are just some of the examples.

Class 2 refers to absorption of water and intrusion. This means that between 5 and 40% of the combined floor, ceiling and wall is constructed of low-evaporation materials like plaster, concrete, wood or the masonry.

The porous materials like carpet, insulation , and fiberboard which make up Class 3 are approximately 40% of floor, wall and ceiling materials, with around 40% in class 3. Other materials such as cement or plaster that don’t absorb water haven’t been adversely affected.

Water has been absorbed into materials such as concrete, plaster, and wood, which are classified as Class 4. This will require more time to dry and special drying techniques.

How to dry a water damaged building or house


Three ways of removing water from buildings include physical extraction, dehumidification and evaporate. The removal of liquid water is at about 500 times more efficient than simply making do with dehumidifiers and air mover. The quicker the structure can dry, the better. Both extraction and dehumidification methods are affected by how much of the material is extracted.

Water damage experts use a variety techniques. Our tools include wands, subsurface extraction tools Self-propelled tools, self-propelled instruments, and vacuum squeezers.

Forcible Evaporation

After as much water has been removed, any moisture remaining is then dried by high-speed airmovers.

When an object gets wet or submerged in water it absorbs some moisture or water. As a result, the object becomes damp or wet.

The degree of saturation is known as the point at which it is impossible to hold any additional moisture. More humid means that the air is closer to saturation.

In the evaporation stage, water molecules jump from a liquid state to a gaseous state. This is called the process of evaporation.

In other words, the object will no longer absorb additional moisture from the atmosphere. This is referred to as the saturation point. Once the saturation point is reached drying begins.

In the process of evaporation the highly efficient air moves dry the object on two sides. They create strong airflow which is controlled by a filter system.

Air mover can move 10 to 20 times more air than a fan , or an ordinary household fan.

Air movers dry objects about 10 times faster than normal conditions, when no air mover is used.

A high-velocity airflow is able to dry the surface of the object and absorbs the moisture that has been drawn out by the air movers.

Utilize heat to aid in the drying process

The element of heat is crucial to the success of any restoration project. To dry out materials damaged by water, we employ various kinds of heaters.

Electric Heaters These heaters are perfect for drying jobs that require several different heating sources. This is because they come in a variety of wattages, allowing you to use multiple heaters at the same time.

You can also turn down or off electric heat while the job is being done, without affecting other heaters. To maximize efficiency and lower your expenses for energy you can alter the wattage of a heater while increasing it’s wattage.

Because they emit virtually no carbon dioxide and require minimal water Electric heaters are popular for restoration projects. The only issue is that they take longer time to heat up, requiring longer drying time. process in general.

Hydronic Bioler (TES),: These boilers heat up quickly and emit very little carbon dioxide. They are typically run using propane or natural gas.

Hydronic boilers differ from electric heat since they don’t utilize forced air heat to distribute heat. This makes it difficult to evenly heat large areas by using these heaters. They are also able to dry out jobs that do not require ceilings or walls to remain in their place.

They are also commonly used when there is no power available to run electric heaters. They are capable of producing radiant heat and can keep your drying area warm without the need of electricity.


We employ low Grain Refrigerant Dehumidifiers (LGR) to keep buildings dry and houses that have suffered water damage.

The LGR Home Dehumidifier can draw 170 pints of moisture from damp structures which have suffered extensive water damage within 24 hours.

In addition to removing water out of the air, like an LGR Refrigerant Dehumidifier does this, the home dehumidifier can also remove up to 99% of airborne mold spores in the air by eliminating condensation.

Fixing Hardwood Floor Water Damage

The floors that have been damaged by water need to be cut up to ensure repairs can be made from the subflooring upwards.

The subflooring must be removed and repaired prior to. Then the affected hardwood boards must be sanded or replaced. To ensure uniformity, all floors should be sanded and refinished after these repairs have been made.

Carpets are vulnerable to water damage

Floods can cause severe damage to your home and can make repairs difficult and expensive. You may need to replace your flooring even if you’ve removed the water from the area as quickly as you can.

After spending time and money restoring your home back to its original state, it could be a shock to discover that the end result leaves some things to be desired.

It is crucial to determine the extent of the damage as fast as possible. The first step is to determine if the damaged area requires replacement. There is a good chance that the carpet will be maintained and cleaned once it is dry, and this cleaning will help eliminate some of concerns regarding the growth of mildew and the lingering smells.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpeting , especially if the water damage was very extensive. In certain instances the only solution to get rid of these stains is to replace the flooring. An odor that is persistent and strong can also be an indication to get your carpet replaced. It is necessary to replace your padding and carpet in the event of this.

Check to see if the floor can be professionally dried before deciding whether you want to change it. If you have a reliable company do the cleaning, then you’ll be able to determine how severe the water damage was. We can evaluate whether or not the carpet should be replaced or saved. If your carpet is damaged, certain drying methods can cause further damage to it.

Many factors determine the need for padding or carpet need to be replaced.

Can your carpets be dried or cleaned professionally?

The carpet’s ability to remain fresh can be compromised if the padding beneath it has been damaged. Although your carpet may have dried in a short time, mildew growth is still possible in the padding beneath if it isn’t dried.

Professional carpet cleaning company is the best way to make sure your carpeting is dry and clean following an event of flooding. After the job is completed, you’ll be able make an informed decision about the condition of your carpet. It is also possible to decide whether to replace it.

Drywall Damaged by Water

The procedure for repair of drywall differs based on the extent of damage. Repairing water damage can be as easy as removing an area of drywall cleaning it, after that, replacing it.

On the other side of the coin serious damages could necessitate a total wall replacement, which includes walls studs and fiberglass insulation.

The spores of mold can be seen in drywall damaged by water that is hard to get rid of. In the majority of cases the drywall will need to be replaced. We employ moisture testing tools that help us determine the extent to which water has grown. This allows us to identify damaged areas and limit the cost to those areas that are only damaged.

It also causes structural damage because it causes the wood material to expand and contract. It is much more difficult to break wood when it is moistened by water. The wood can be brittle if allowed to dry in water for too long.


To avoid this issue, it’s important to homeowners and property owners to fix structural damage from the effects of moisture on their property immediately after a flood or water damage incident.

Water Damage to the Foundation

The damage caused by water to a house’s foundation can happen due to many reasons. While not every water issue could cause structural damage, it is important to address foundation issues as soon as possible in order to avoid any further structural damage.

The damage caused by water in the foundation could cause various issues depending on how it is handled. If the damage is not treated quickly, it can result in serious structural damages.


Roof Water Damage

Damage to the roof can result from natural disasters similar to foundation water damage. Along with creating roof leaks damage can cause issues with the walls and foundation of a home or construction.

Leaking roofs can be extremely expensive and could have major negatives. The roof’s leaks could result in the growth of mold, which can prove fatal. A leaky roof can harm the roof truss system and cause structural damage to the roof.

Leaks in the ceiling can cause your rafters to deteriorate and soften if you do not take action immediately. Water damage to the roof could be caused by electrical faults which could lead to the possibility of an electric fire. These are all good reasons to get roof water damage taken care of quickly after a flood or other type of unexpected damage.

HVAC Water Damage

Your home could be damaged by structural damage if the HVAC system fails or is defective equipment is installed. Your business and home at risk because you do not have HVAC. Mold growth can lead to serious health problems.

Water damage to pipes

Damage to pipes typically caused by a ruptured pipe in your home. Once you’ve determined there’s a leak, it is essential to contact a professional to stop the water from causing structural damage.

A burst pipe can cause serious damage. The water could enter your home through broken pipes, which can cause severe damage. This can lead to structural damage.

Shut off the water supply, and then contact an experienced IICRC-certified professional at a water restoration firm such as Critical Control as soon as you detect broken pipe water damage.

What is the price of cleaning up water damages?

Water damage restoration cost per square foot

Cleaning and repair costs can vary based on how much square footage you have. National Flood Services has the following pricing breakdown per square foot.

Are water damage covered by the homeowner’s insurance policy?

If the cause was accidental and sudden the homeowners insurance policy generally cover it. According to the Insurance Information Institute, homeowners insurance can cover repairs or replacement for a broken window, but not if the damage occurs as a result of neglect.

Damage from neglect may be described as wear and tear to an object or surface because of exposure, insufficient preventative maintenance, or general degradation. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance does not cover damage from neglect.

A homeowner’s insurance policy will not cover water damage due to flooding. Flood insurance is mandatory. In some areas the flood policies are demanded by mortgage companies. Flooding may occur because of storms, ground that is saturated to the point of and surging or overflowing bodies water like rivers, ponds, lakes, streams, oceans together with high winds.