Flood damage restoration service – Hollydale

Property owners in Hollydale experience burst pipe damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

Water damage is more common when water seeps into a building or residence through a storm, flood or burst pipes. Sometimes the damage is overt and obvious, but sometimes it’s subtle or even hidden.

Remediation of water damage is more complicated than just drying out the interior. Modern professional methods for water damage remediation like Critical Control, can often minimize damage that otherwise would require a complete structural replacement.

Water Damage Restoration Guidelines are Available for your reference. Call for a Professional

Many times, homeowners or builders attempt to repair water damage with DIY methods that can be found on the internet. This is a mistake. There are guidelines for dealing with water damage and they depend on the equipment and expertise of experts. These guidelines are detailed in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide exists because of the necessity of professional standardisation of situations that involve water destruction to buildings and homes as well as the risk they present.

The IICRC guidelines aid restoration professionals like Critical Control to evaluate the severity and type of damage on each project.

There are a lot of reasons why professionals dealing with water damage should follow these guidelines. There are instances that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is professional with the knowledge and experience to evaluate the health of a building, collect samples, get lab testsand provide us with the type of water damage.

This is crucial in situations where the occupants of the building could be at risk, there is a possibility of negative health effects, the people who live there are required to determine the suspected contaminants or any other reason that there might be concerned about contamination.

Categories and classes of Water Damage


Restoration projects for water damage are divided into two categories, depending on how extensive the infiltration of water is.

The classification has to do with how dirty the water that entered the structure was. Category 1 means that the water originates from a clean source, such as a water source that burst, or even a sink or tub.

Category 2 involves water that has significant levels of contaminants, and could be able to cause discomfort of illness if contacted or consumed. It could include sources that may not normally seem like a threat such as discharges from washing machines, or overflows from toilets.

Category 3 water can be considered extremely contaminated. It could be contaminated by toxic, pathogenic, or any other hazardous substances. Usually this means contamination from the backflow of toilets from the toilet trap, seawater, water flooding from rivers and streams or any other source of water that comes from the exterior of the building. This water can be contaminated by pesticides, heavy metals or other toxic substances.


We can also use the IICRC’s courses to determine how much water has gotten into your property. This is basically setting guidelines for the saturation of the home or building.

Class 1 refers to the lowest amount of absorption and water. It is the case when water is in contact with about 5% or less with construction materials which absorb water. This is because most substances affected by water won’t absorb or hold water. Concrete, plaster, masonry, and coated or finished wood are only a few examples.

Class 2 refers to water absorption and intrusion. It means that anywhere between 5% to 40% of the ceiling, floor and wall is made from low-evaporation substances like wood, concrete, or bricks and mortar.

The porous materials, such as carpet, insulation and fiberboard which make up Class 3 are approximately 40% of floor, wall and ceiling materials, including about 40% in class 3. and also where other materials that do not absorb water like concrete or cement have not been negatively affected.

Water has been absorbed by materials such as concrete or plaster and wood, which are classified as Class 4. This requires special drying techniques and longer drying times.

How to dry a water damaged Building or House


Three ways to remove water from buildings include physical extraction, dehumidification and the process of evaporation. Eliminating liquid water is typically 500 times more effective than dehumidifiers and airmovers. The faster the structure dries more efficiently. The quantity of materials to be extracted will influence both dehumidification and extraction techniques.

Professionals dealing with water damage employ various extraction methods. We use a variety of equipment, such as subsurface extraction tools as well as self-propelled tools.

Forcible Evaporation

The remaining moisture is dried by high-speed airmovers after as much water as possible is removed.

A submerged object absorbs moisture and water when it is moistened. The result is that the material gets dampened or wet.

Saturation is defined as the point at which it becomes impractical for the air to contain any moisture. A higher humidity indicates that the air is getting closer to saturation.

The evaporation phase is when water molecules change from an in liquid state to a gaseous state. This process is known as evaporation.

This signifies that the object is no longer able to absorb water from the air. We call that saturation point the point at which evaporation begins. When saturation is reached, drying starts.

In the evaporation phase high-efficiency air moves dry the object on two sides. They create a strong air flow over the entire surface which is directed through a filter system that is able to cover the entire surface of the object.

A fan that moves air can move 10 to 20 times the amount of air than a fan , or an ordinary household fan.

Air movers dry the object approximately 10 times more quickly than in natural conditions, where no air mover is used.

Airflows that are high-velocity dry the surface and absorbs the moisture pulled out by the air movement.

Utilize heat to aid in the drying process.

Heating is a crucial element of any water damage restoration project. We use a variety of heaters to dry out materials that have been damaged by water.

Electric Heaters: These heaters can be used for drying jobs that require multiple heating sources. You can run multiple heaters simultaneously because of their many power ratings.

It is also possible to turn off or turn off the electric heater while the job is being done, and not affect other heaters. This means you can lower one heater, while increasing the power of the other to increase efficiency and reduce your cost of energy.

Electric heaters are very common in restoration work since they generate virtually zero emissions and consume minimal amounts of water. The only issue is that they take longer time to get hot, which requires longer drying time. process overall.

Hydronic Bioler (TES): They are also extremely efficient at heating up quickly yet releasing low emissions. They typically operate on natural gas or propane.

Hydronic boilers are different from electric heating in that they do not use forced-air to distribute heat, which means it could be difficult to evenly heat a large space with these kinds of heaters. They also operate at a lower temperature, making them perfect for drying tasks that require ceilings and walls to remain in place.

When electric heaters cannot be used, hydronic boilers can often be used. They are capable of producing radiant heat and keep your drying area warm without the need of electricity.


We employ low Grain Refrigerant Dehumidifiers (LGR) to help dry out buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can remove 170 pints water from an un-dry structure that is severely damaged by water damage every all day, every hour of the day.

The dehumidifier at home is able to remove water from the air in the same way it does an LGR Refrigerant Dehumidifier. It can eliminate the 99 percent or more of the mold spores that are airborne by eliminating condensation.

Repairing Hardwood Floor Water Damage

Water damaged hardwood floors need to be ripped up so repairs can take place from the subflooring upwards.

Subflooring that is damaged first has to be taken off and fixed. Then the affected hardwood boards require sanding down or replaced. To ensure a uniform appearance, all floors should be sanded, then refinished after these repairs are completed.

Carpets are susceptible to water damage

If you have had the misfortune of experiencing a flood in your home it could be a stressful and expensive experience. Even if the water has been removed from the affected region immediately, there’s an opportunity that you’ll have to replace your flooring eventually.

After investing time and money in restoring your home back to its pre-flooding condition, it will be devastating to find that the end result leaves an unsatisfactory impression.

It is vital to identify the extent of damage as soon as is possible. First thing to do is determine if the affected part requires replacement. There’s a good chance that the carpet will be cleaned and still used after it has dried and this will eliminate some of concerns regarding the growth of mildew and persistent odors.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpeting , especially if the damage from water was extensive. There are times when you have to replace your flooring to get rid of the stains. An odor that is persistent and strong can also be an indication to replace your carpeting. If this is the case, then you will likely require replacement of both your carpet and padding.

Next, determine if your floor can be dried professionally before deciding whether you want to change it. A professional service can aid you in determining the severity of the damage was. We will be able to determine if your carpet needs to be replaced or saved. If your carpet is damaged, certain drying methods can cause further damage to it.

Many factors determine the need for padding or carpet is a good idea to replace it.

Do your carpets need to be dried or cleaned professionally?

The carpet’s ability to remain fresh can be compromised if the padding underneath it is damaged. Even though your carpet is dried in a short time, mildew growth is still possible when the padding beneath isn’t dried.

Professional carpet cleaning service is the most effective way to ensure your carpet is dry and clean after the flood. Once the work is done you’ll be able to make an informed decision on the condition of your carpeting. You’ll also be able to determine whether you want to replace it.

Drywall Damaged by Water

The drywall repair procedure varies according to the extent of the damage. Repairing water damage can be as simple as removing the drywall portion, cleaning the area, and then replacing it.

On the other side of the coin, serious damages could necessitate a total wall replacement, which includes wall studs and fiberglass insulation.

The spores of mold can be seen in water damaged drywall that is hard to get rid of. In most instances the drywall needs to be replaced. We utilize moisture testing tools which allow us to identify the extent to which moisture has become. This allows us to identify the areas that are damaged and keep costs restricted to areas that need to be repaired.

Water also causes structural damage, as it causes the wood material to expand and expand and contract. It is easier to break wood if it has been moistened with water. The wood may be brittle if left to dry in water for too long.


To prevent this issue, it’s important to homeowners and property owners to address structural damages from the effects of moisture on their properties immediately following the water or flood incident.

Water Damage to the Foundation

There are many reasons water damage can affect a foundation of a house. Although not all water problems can lead to structural damage, it’s crucial to correct foundational issues as soon as possible to prevent further structural damage.

Water damage to the foundation can result in a myriad of issues based on the way it is dealt with. If the issue isn’t addressed quickly, it can cause serious structural damage.


Roof Water Damage

Damage to the roof can result from natural disasters as well as foundation water damage. Roof damage could cause roof leaks as well as damage the foundations of a building or the foundation of a home.

Leaking roofs can be extremely costly and can have significant drawbacks. Leaks in the roof could result in mold and mildew to develop, which could be deadly. Leakage in the roof can cause damage to the roof truss system.

If you don’t fix the leaks in your ceiling promptly they could cause your rafters decay and soften. Roof water damage can also result from electrical faults that can cause an electric fire. All of these are good reasons to have roof water damage repaired swiftly following a flood or other sudden damage.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system fails or faulty equipment is put in place. Your business and your home at risk by not having HVAC. It is possible for mold to grow and cause a variety of health issues that are very serious.

Damage to Pipes from Water

If you’re experiencing pipe water damage, it is likely to be from a burst pipe in your home. If you’ve determined there’s been an issue, it is important to seek out professional assistance to stop the water and ensure that it doesn’t cause structural damage.

Burst pipes can cause a number of damages. Water can enter your home via broken pipes, causing severe damage. It could cause structural damage.

Shut off the water supply and call a skilled IICRC-certified expert at a water restoration firm like Critical Control as soon as you notice broken pipe water damage.

What is the cost to fix water damage?

Water damage restoration cost per square foot

Based on the square feet the water damage repairs and cleanup expenses vary. National Flood Services has the following pricing breakdown per square foot.

Can Water Damage be covered By the Homeowner’s Insurance?

Homeowners insurance policies are usually appropriate if the damage is unexpected and not intentional. According to the Insurance Information Institute, homeowners insurance can cover repairs or replacement for a damaged window, but not when the damage occurs as a result of neglect.

Neglect can be described as damage to a surface or an object that is caused by exposure, poor maintenance or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

If the water damage is the result of flooding, the incident would not be covered by a homeowners policy. A flood policy would be necessary. Mortgage lenders may require flood policies in certain areas. Flooding can be caused by storms, flooding the ground and overflowing bodies, or overflowing or surging bodies like streams, lakes, rivers and oceans.