Flood damage restoration service – Kent Woodlands
Building owners in Kent Woodlands get hit with flood damage regularly. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.
If a storm, flood or burst pipes cause water to seep into a home or structure, water damage occurs more often than not. Sometimes, the damage is obvious and evident. Other times, it’s subtle or under-reported.
It is more complicated than just drying out the interior of the building to repair water damage. Modern professional methods for water damage remediation like Critical Control, can often reduce damage that would normally need a total structural replacement.
Water Damage Restoration Guidelines are readily available – Call a Professional
Many times, homeowners and builders attempt to repair water damage with DIY solutions located on the internet. This is a bad idea. There are guidelines for dealing with water damage , and they require the equipment and expertise of professionals. These guidelines are detailed in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is required to ensure professional standardisation of situations involving water damage to buildings or homes, and the risk associated with it.
Critical Control, a restoration company, can use the IICRC guidelines to help them assess the type and extent of the project’s damages.
These guidelines are important for professionals dealing with water damage. There are certain situations that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is an expert who has the knowledge and experience to evaluate a site for contamination and collect samples, conduct lab tests, and then advise us on the category of water damage.
This is crucial in cases where the building’s inhabitants could be at risk, are a chance of adverse health effects, the occupants have a desire to know the contaminants that are suspected or any other reason to raise concerns about contamination.
Water destruction caused through categories and classes
Restoration projects for water damage are divided into two categories, depending on how extensive the infiltration of water is.
The category is based on how polluted the water that entered the structure is. Category 1 means that the water originates from a clean source such as a burst water supply or a sink or tub.
Category 2 involves water that contains significant amounts of contaminants and is likely to cause discomfort of illness if contacted or consumed. These include sources that are not usually considered to be dangers, such as the discharge from washing machines or toilet overflows.
The water in the category 3 is considered extremely contaminated. It could be contaminated by toxic, pathogenic or other hazardous substances. This usually means contamination from toilet backflows following the toilet trap, seawater, water flooding from rivers and streams, or any other water flowing from the building exterior. This water can contain pesticides, heavy metallics or toxic substances.
The IICRC has also created classes we use in determining the degree of water intrusion into your property. This is basically a guideline for how much saturated a structure or residence should be.
Class 1 is the smallest amount of absorption and water. This is where the water comes into contact approximately five percent or less building materials which absorb water. This is because most substances affected by water don’t retain or absorb water. Concrete and masonry, as well as plaster and coated or finished wood are only some of the examples.
Class 2 is a term used to describe water absorption and intrusion. This means that between 5% to 40% of the total ceiling, floor and wall is constructed of materials with low-evaporation, such as plaster, concrete, wood, or masonry.
Class 3 means that about 40 percent or more of flooring, walls, and ceiling materials are porous materials such as fiberboard, insulation, carpet, etc. and other materials that do not absorb much water such as concrete or plaster haven’t been negatively affected.
Class 4 refers to the fact that water has become deeply stuck in materials that do not easily absorb water like plaster, wood, concrete and the masonry. This means that it requires longer drying times and special drying methods.
How to dry a water damaged building or house
Three ways to remove water from buildings are physical extraction, dehumidification and evaporate. Removal of liquid water is at about 500 times more efficient than just making do with dehumidifiers and air moving machines. The quicker the structure is dried the more effective. The extraction method and the dehumidification process will be affected by the amount of much of the material is extracted.
Water damage experts utilize a variety of extraction methods. Some of our tools include tools for subsurface extraction, wands, self-propelled tools, and vacuum squeezers.
Once all water has been removed, any moisture remaining is then dried by high-speed airmovers.
If an object is wet or submerged in water, it absorbs a portion of the water or moisture. The substance gets wet or damp because of this.
The degree of saturation is known as the point where it is impossible to hold any more moisture. The higher the humidity, the more close the air is to saturation.
In the evaporation process in which water molecules are ejected from a liquid state to a gaseous state. This process is known as evaporation.
This means that the object is no longer able to absorb moisture from the air. The saturation point is the point at which evaporation begins. Once saturation is reached, drying will begin.
High-efficiency air movers dry objects on two sides during the evaporation process. They create a strong air flow over the entire surface, which is directed by a filter that covers the entire surface of the object.
An air mover can transport between 10 and 20 percent more air than an ordinary fan, or even a regular fan used in the home.
Air movers dry objects about 10 times faster than natural conditions, where there is no air movement.
A high-velocity airflow dries the surface and draws in the moisture that has been drawn out by the air mover.
Use heat to assist the drying process
Heat is an important component of any restoration job. To dry out the materials damaged by water, we make use of various kinds of heaters.
Electric Heaters: These heaters may be used to dry jobs that require multiple heat sources. It is possible to run several heaters simultaneously due to their numerous wattages.
You can also turn down or off electric heat as the work is completed, but without impacting other heaters. In order to maximize efficiency and lower the cost of energy, you can adjust the wattage of a heater while increasing it’s wattage.
Electric heaters are a common feature in restoration work since they generate virtually no emissions and require very little water. However, the only drawback is that they take longer time to get hot, which requires more time for the drying process overall.
Hydronic Bioler (TES),: These boilers heat up quickly and emit very little carbon dioxide. They typically operate with propane or natural gas.
Hydronic boilers differ from electric heaters because they don’t use forced-air heat to distribute heat. This makes it difficult to distribute heat evenly over large areas with these heaters. They also operate at a lower temperature, making ideal for drying projects which require ceilings and walls to remain in place.
Hydronic boilers are also often used when there is no power available to power electric heaters. Because they are extremely efficient in producing radiant heat, they are able to easily keep your drying space warm, even without an electrical power source.
To dry buildings and houses that are damaged due to water damage, we make use of low Grain Refrigerant (LGR) Dehumidifiers.
The LGR Home Dehumidifier can remove 170 pints water from an un-dry structure that has been severely damaged by water damage every all day, every hour of the day.
The home dehumidifier can extract water from the air in the same way as an LGR Refrigerant Dehumidifier. It can also remove up to 99 percent of the mold spores that are airborne by removing condensation.
Fixing Hardwood Floor Water Damage
Water damaged hardwood floors need to be removed so that repairs can occur beginning with the subflooring and moving upwards.
Subflooring that is damaged first has to be removed and repaired. The affected hardwood floors must be sanded or replaced. Once these repairs are complete and the floor is finished, it should be sanded and refinished to ensure a uniform appearance.
Carpets are susceptible to water damage
If you have been unfortunate enough to have flooding in your house this can be a costly and stressful experience. Even if the water is taken away from the affected region immediately, there’s the possibility that you’ll have to eventually replace the flooring.
It would be devastating to discover that your home isn’t in the best condition after spending many hours and dollars to repair it.
This is why it is essential to evaluate the extent of the damage as soon as possible. First thing to do is to determine if the damaged part requires replacement. It is possible to clean the carpet and then use it once dry. This can alleviate any concerns about mildew growth or persistent scents.
Salvaging Carpet After a Water Damage Event
If the damage from water is very extensive It is likely that you’ll see noticeable marks on your carpet. In some instances the only solution to remove the stains is to replace the flooring. A persistent, strong odor could also be a reason to change your carpet. If it is it is likely that you’ll have to replace the padding and carpet.
The next step in determining whether or not you’ll need to replace your carpet is to find out if the floor can be cleaned and dried professionally. If you’ve got a reliable company do the cleaning, you’ll have a better understanding of how serious the damage was. Our company will assess the carpet and decide if it should be replaced or salvageable. Remember that certain methods employed to dry the carpet can harm the carpet further even if it’s already in poor condition.
Some of the considerations that determine whether or not the carpet and padding require replacement are:
- How much water did you get on your carpeting?
- How long was the amount of water that sat on the carpet?
- What was the source of the water?
Do your carpets need to be dried or cleaned professionally?
The carpet’s ability to stay clean can be affected if the padding underneath it is damaged. Even though your carpet is dried quickly, mildew growth can still occur when the padding beneath is not dried.
The safest way to ensure that your carpeting is properly cleaned and disinfected following a flood is to hire a professional carpet cleaning company. Once the work is done then you’ll have the ability to make an informed decision about the condition of your carpet. You can also decide whether to replace it.
Drywall that has been damaged by water
The process for repairing drywall varies according to the extent of the damage. Repairing water damage is as simple as removing a section of drywall cleaning it, after that, replacing it.
The flip side of the coin is that serious damage could need to be repaired completely, including the wall studs and fiberglass insulation.
Mold spores can be found in water damaged drywall that is difficult to eliminate. In most cases the drywall needs to be replaced. We employ moisture testing instruments to determine the amount of the moisture. This allows us to pinpoint areas that are damaged and limit costs to only the areas that are damaged.
It also causes structural damage by causing the material to expand and shrink. When the wood is saturated by water, it becomes a lot easier to break. The wood can be brittle if left to dry in water for too long.
This problem can be avoided by owners of buildings and homeowners immediately taking action to repair structural damage from moisture-related problems with their property following a flood or other water damage.
Water Damage to the Foundation
Damage to a home’s foundation can occur for various reasons. While not all water concerns result in structural damage, it’s crucial to address foundational issues as quickly as possible to prevent structural damage.
The damage caused by water in the foundation could cause a number of different issues depending on how it is dealt with. It can cause severe structural damage if the issue isn’t addressed quickly.
Roof Water Damage
Water damage to roofs can be caused by natural catastrophes similar to foundation water damage. Roof damage can lead to roof leaks, and can also cause damage to the foundation of a house or the foundation of a home.
Roof leaks can be very costly and might have significant negatives. A leak on the roof may cause mold and mildew to develop, which could cause death. Leaks in the roof may also cause damages to the roof truss.
If you don’t take care to address leaks in your ceiling immediately they could cause your rafters decay and soften. Electrical faults are also prevalent in the case of roof water damage which could cause an electrical fire. These are all good reasons to have roof water damage taken care of quickly after a flood or other type of unexpected damage.
HVAC Water Damage
If your HVAC system begins to fail or brand new equipment becomes defective, it could cause structural damage to your house. If you do not have HVAC, you are exposed to the interior of your business or home to all sorts of issues. Mold growth can occur and result in a range of health issues that are very serious.
Damage to pipes caused by water
If you’re experiencing pipe damage due to water, it is most likely coming from a burst pipe in your home. When you’ve discovered that there has been leak, it’s crucial for you to contact a professional to stop the flow of water and ensure it doesn’t lead to structural damage.
A ruptured pipe can result in severe damage. When your pipes break and water enters your home, causing extensive damage and requiring water damage repair – a process that can bring with it structural damages.
Shut off the water supply and then call an experienced IICRC-certified professional from a company for water restoration like Critical Control as soon as you detect broken pipe water damage.
What is the cost to fix the water damage?
Water damage restoration cost per square foot
Based on the square feet, water damage repair and cleanup costs vary. National Flood Services has the below pricing breakdown for each square foot:
- Category 1 clean water: $3.75/sq. feet.
- Category 2 gray water: $4.50/sq. feet.
- Category 3 blackwater cost: $7/sq. Ft.
Does water damage get covered by homeowner’s insurance?
Insurance policies for homeowners are typically appropriate if the damage is sudden and not intentional. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement for a broken window, but not if the damage was the result of neglect.
Damage from neglect could be defined as wear and tear on a surface or object due to exposure, insufficient regular maintenance or general wear and tear. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance will not cover damages due to neglect.
If the damage to your property is the result of an event that is a flood, it is not covered under homeowner’s insurance. The flood insurance policy is mandatory. In some areas the flood policies are demanded by mortgage lenders. Flooding can happen due to flooding, over-saturated ground, and surging or overflowing bodies water like rivers, ponds, lakes rivers, oceans, and streams in combination with high winds.
- Acalanes Ridge
- Aetna Springs
- Alamo Oaks
- Alderglen Springs
- Alhambra Valley
- Alliance Redwood
- American Canyon
- Bay Point
- Bayo Vista
- Bethel Island
- Birds Landing
- Black Oaks
- Black Point
- Black Point-Green Point
- Bodega Bay
- Boyes Hot Springs
- Camino Tassajara
- Camp Meeker
- Camp Rose
- Castle Hill
- Chabot Terrace
- Contra Costa Centre
- Corte Madera
- Cuttings Wharf
- Cypress Grove
- Deer Park
- Del Rio Woods
- Dillon Beach
- Discovery Bay
- Duncans Mills
- East Richmond Heights
- East Windsor
- El Bonita
- El Campo
- El Cerrito
- El Verano
- Enchanted Hills
- Fetters Hot Springs
- Fetters Hot Springs-Agua Caliente
- Five Brooks
- Forest Hills
- Forest Knolls
- Fort Ross
- Glen Ellen
- Glen Frazer
- Goat Rock
- Green Valley
- Guadalcanal Village
- Guernewood Park
- Harry Floyd Terrace
- Inverness Park
- Lagunitas-Forest Knolls
- Las Gallinas
- Las Juntas
- Leisure Town
- Los Medanos
- Lucas Valley
- Lucas Valley-Marinwood
- Maine Prairie
- Marin City
- Mark West Springs
- Marsh Creek Springs
- McNears Beach
- Mill Valley
- Mirabel Heights
- Mirabel Park
- Mission Highlands
- Montalvin Manor
- Monte Rio
- Monte Rosa
- Mount Jackson
- Muir Beach
- Napa Soda Springs
- Nicks Cove
- Noel Heights
- Norris Canyon
- North Gate
- North Richmond
- Northwood Heights
- Northwood Lodge
- Oak Knoll
- Ocean Roar
- Orinda Village
- Pleasant Hill
- Point Reyes Station
- Pope Valley
- Port Costa
- Reliez Valley
- Rio Nido
- Rio Vista
- Rock City
- Rohnert Park
- Russian River Terrace
- Salmon Creek
- San Anselmo
- San Geronimo
- San Miguel
- San Pablo
- San Quentin
- San Rafael
- San Ramon
- Sand Hill
- Santa Rosa
- Santa Venetia
- Sea Ranch
- Sears Point
- Sereno del Mar
- Shell Ridge
- Shipyard Acres
- Shore Acres
- Silverado Resort
- Sleepy Hollow
- Spanish Flat
- St. Helena
- Stewarts Point
- Stinson Beach
- Stony Point
- Suisun City
- Summerhome Park
- Tamalpais-Homestead Valley
- Tara Hills
- Timber Cove
- Two Rock
- Vacation Beach
- Valley Ford
- Veteran Heights
- Vichy Springs
- Villa Grande
- Vine Hill
- Waldrue Heights
- Walnut Creek
- Walnut Heights
- Walsh Landing
- Walter Springs
- West Hartley
- Wilson Grove