Water damage remediation – Lakeville
Homeowners in Lakeville experience water damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.
When a storm, flood, or burst pipe causes water to get into a home or structure, water damage occurs most of the time. Sometimes, the damage is obvious and evident. Sometimes, the damage is more subtle or unreported.
It is more complicated than just drying the interior to repair water damage. With the most modern water damage remediation tactics typically restorers such as Critical Control can mitigate damage which previously would have required a complete structural replacement, in other words, demolish and rebuild.
Water Damage Restoration Guidelines are readily available for your reference. Call a Professional
A lot of times, property or home owners try to tackle water damage with DIY solutions available on the internet. This is a bad idea. Water damage can be controlled in accordance with the established guidelines. These guidelines demand the expertise and equipment of professionals. The guidelines are laid out in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the necessity for professional standards in cases involving water damage to homes and buildings and the dangers they can present.
Critical Control, a restoration company, can use the IICRC guidelines to help them assess the type and extent of each project’s damage.
There are really important reasons why water damage experts need to adhere to these guidelines. There are certain situations that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is someone who has the skills and experience to analyze the condition of a place, take samples, run lab tests, and then give us advice on the nature of the water damage.
This is particularly important when the building’s occupants are at high risk or are concerned regarding contamination.
Categories and classes of Water Damage
Projects for water damage restoration are classified into two categories, depending on how extensive the infiltration of water is.
The category refers to how contaminated the water that enters the structure has been. Category 1 implies that the water comes from a clean source, such as a burst water supply or tub or sink.
Category 2 involves water that has significant levels of contaminants and is likely to cause discomfort of illness when inhaled or consumed. This could include water that isn’t obvious as a danger such as the effluent from washing machines, or the spills from toilets.
Category 3 water can be considered highly contaminated. It could be contaminated by toxic, pathogenic, or other dangerous substances. Most often, this is due to contamination by sewage, toilet backflows after the trap for toilets or a flood of seawater from streams and rivers, or any other water flowing from the exterior of the building. The water in this category could contain heavy metals, pesticides, regulated materials or toxic substances in it.
We can also use the IICRC’s classes to determine just how much water has entered your property. This system is basically a guideline for the amount of water a building or home is.
The lowest amount of water absorption , and the greatest amount of water is categorized as Class 1. This is where the water comes into contact around 5% or less with construction materials which absorb water. This is because most materials that are affected by water don’t hold or absorb water. Examples include concrete, coated or finished wood, plaster or masonry.
Class 2 means that there is substantial infiltration of water as well as intrusion. It’s about 5% to 40% of the total floor, wall and ceiling consist of low evaporation materials such as plaster, concrete, wood, or bricks and mortar.
Class 3 means that about 40 percent or more of flooring, walls, and ceiling surfaces are porous such as carpet, insulation, fiberboard and so on. Other materials like concrete and plaster that do not absorb water have not been affected in any way.
Water has been absorbed into substances like concrete as well as wood, plaster, and even wood that are classified as Class 4. This calls for special drying techniques and longer drying times.
How Drying a Water Damaged Home or Building Works
Three methods for removing water from buildings are physical extraction, dehumidification and the process of evaporation. Eliminating liquid water is, at a minimum, 500 times more effective than dehumidifiers and airmovers. The faster the structure dries, the better. Both methods of extraction and dehumidification will be affected by how much stuff is being extracted.
Water damage experts utilize a variety of extraction methods. Some of our tools include wands, subsurface extraction tools, self-propelled tools, and vacuum squeezers.
After the water has been removed, any moisture remaining is dried with high-speed airmovers.
Submerged objects absorb water and moisture when it’s moistened. In the process, the object becomes damp or wet.
Saturation is the time at which it becomes impossible for the air to contain any moisture. The greater the humidity, the more close the air is to saturation.
The evaporation phase is the time when water molecules transition from an in liquid state to a gaseous state. The process is referred to as evaporation.
In this way, the object does not absorb any more moisture from the atmosphere. This is known as the saturation point. the point of evaporation. Once saturation is reached, drying will begin.
High-efficiency air movers dry objects on both sides in the evaporation phase. They generate a large airflow over the surface of the object, that is controlled by a filter that completely covers the area of the object.
An air mover can move around 10 to 20 percent more air than a fan, or even a regular fan in your home.
Air movers dry objects about 10 times faster than in natural conditions, where there is no air movement.
Airflows that are high-velocity removes the moisture from the surface and absorbs the water that is drawn out by airflow.
Using Heat To Assist The Drying Process
The most important element for any water damage restoration is the use of heat. We employ a variety of heaters to dry the materials that are damaged by water.
Electric Heaters They are ideal for drying jobs that require multiple heat sources. They come in a variety of wattages, allowing you to run multiple heaters simultaneously.
Electric heat can also be capable of being reduced or turned off during the process, without impacting your other heaters. This means that you could reduce one heater while increasing the power of the other to increase efficiency and lower energy costs.
Electric heaters are a common feature in restoration jobs since they generate virtually no emissions and use minimal amounts of water. They require longer to heat up and take longer drying time.
Hydronic Bioler (TES): These boilers are extremely efficient in heating up quickly yet releasing minimal emissions. They can run on natural gas or propane.
Hydronic boilers differ from electric heat in that they don’t make use of forced air to distribute heat, which means it could be challenging to evenly heat an space with these kinds of heaters. They also operate at a lower temperature, making ideal for drying projects that require walls and ceilings to be left unattended.
In the event that electric heaters can’t be used, hydronic boilers can typically be utilized. Because they’re so effective at producing radiant heat, they are able to easily keep your drying area warm even when there is no electric power source.
We utilize Low Grain Refrigerant Dehumidifiers (LGR) to dry buildings and houses that have suffered water damage.
The LGR Home Dehumidifier can extract 170 pints moisture from damp structures that have suffered massive water damage in just 24 hours.
The dehumidifier at home is able to remove water from the air in the same manner as an LGR Refrigerant Dehumidifier. It will also eliminate the 99 percent or more of the airborne mold spores by eliminating condensation.
Fixing Hardwood Floor Water Damage
It is essential to take away water damaged hardwood floors to ensure that repairs can be made by removing the subflooring.
The subflooring must be removed and repaired prior to. Then the affected hardwood boards must be sanded or replaced. After these repairs are completed and the floor is finished, it should be sanded and refinished to ensure uniformity.
Carpets are prone to water damage
If you’ve experienced a flood in your home it could be a costly and stressful experience. You might need to change your flooring even if you’ve eliminated the water from the area as soon as possible.
After spending time and money restoring your home to pre-flooding condition, it will be devastating to find that the final results leave something to be desired.
It is essential to assess the severity of the damage as quickly as you can. One of the initial issues that must be resolved is whether the damaged area needs to be replaced. There is a way to wash the carpet, then use it after drying. This can alleviate any concerns about mildew growth or persistent smells.
Salvaging Carpet After a Water Damage Event
There could be staining on your carpeting , especially if the water damage was very extensive. In certain instances the only option to eliminate these stains is to change the flooring. A strong, lingering odor can also be an indication to replace your carpeting. If you find this to be the case it is likely that you’ll require replacement of both the padding and carpet.
The next step to determine whether or not you’ll need to replace your carpet is to assess whether the flooring is able to be professionally cleaned and dried. If you can have a reliable company do the cleaning, you’ll have a better understanding of how serious the damage was. Our firm will examine your carpet and determine whether it’s worth replacing or salvageable. If your carpet is damaged, a few drying techniques can further damage it.
Some of the considerations which will decide whether or whether the padding and carpet require replacement are:
- How much water dripped onto your carpet?
- What was the duration of amount of water that sat on the carpet?
- What was the source of water?
Do your carpets get professionally cleaned, dried and disinfected?
If the padding underneath your carpet is also damaged, this can affect the time that your carpet can last. Although your carpet may have dried in a short time, mildew growth is still possible in the padding beneath if it is not dried.
Professional carpet cleaning service is the best way to make sure your carpeting is clean and dry after the flood. Once the work is done, you’ll be able make an informed decision on the state of your carpeting. It is also possible to decide whether you want to replace it.
Drywall damaged by water
The procedure for repair of drywall differs depending on the severity of damage. Repairing water damage can be as easy as taking out the drywall portion and cleaning the area and replacing it.
On the other side of the coin, significant damages could necessitate a total wall replacement, including walls studs and fiberglass insulation.
There are spores of mold in drywall damaged by water that is hard to get rid of. In most cases the drywall will need to be replaced. We employ moisture testing instruments to determine the amount of moisture. This allows us to pinpoint damaged areas and limit costs to the only damaged ones.
The water can also cause structural damage by causing the material to expand and shrink. It is much easier to break wood if it has been moistened by water. If the water remains for a prolonged time, there could be an abundance of rot within the wood which can make it break easily.
To avoid this problem, it’s crucial for homeowners and building owners to fix structural damage from moisture-related problems with their property immediately after an event like a flood or water damage event.
Water Damage to the Foundation
The damage caused by water to a house’s foundation can happen due to a number of reasons. Although not all water problems cause structural damage, it’s crucial to address foundation issues as quickly as is possible to avoid further structural damage.
The water damage from foundations can result in a myriad of problems depending on how it is dealt with. It could cause serious structural damage if not addressed quickly.
Roof Water Damage
Like foundation water damage, roof water damage is fairly common after natural disasters. In addition to causing roof leaks, roof damage can also cause issues with the walls and the foundation of a house or the building.
Leaking roofs are extremely expensive and could have major negatives. Leaks in the roof may cause mold and mildew to grow, which can be deadly. Leakage in the roof can cause damages to the roof truss.
Leaks from the ceiling could cause your rafters to decay and soften if you don’t deal with them right away. Electrical faults are also prevalent in the case of roof water damage that can lead to an electrical fire. All of these are good reasons to get roof water damage fixed quickly following a flood or other sudden damage.
HVAC Water Damage
If your HVAC system begins to fail or brand new equipment becomes defective, it could result in structural damage to your home. Your home and business at risk by not having HVAC. The growth of mold can cause serious health problems.
Pipe water damage
If you’re experiencing pipe damage due to water, it is likely to be from a burst pipe in your home. Once you’ve determined there’s an issue, it’s important to call a professional to stop the water from creating structural damage.
Burst pipes can cause a lot of damage. When pipes are damaged they can let water into your home, causing severe damages and necessitating repair of water damage. This is which can cause structural damage.
When you see water damage to your pipe that is not repaired, shut off the water supply.
What is the cost to fix the damage caused by water?
Water damage restoration cost per square foot
Depending on the square foot, water damage repair and cleanup costs vary. National Flood Services has the below pricing breakdown per square foot.
- Category 1: Clean water: $3.75/sq. feet.
- Category 2 gray water: $4.50/ sq. ft.
- Category 3 blackwater: $7/sq. Ft.
Are water damage covered by the homeowner’s insurance policy?
If the cause was accidental and sudden, homeowners insurance policies typically cover the damage. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement of a broken window, however, not if the damage is a result of neglect.
Neglect can be described as damage to a surface or object that is the result of the weather, lack of maintenance or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance doesn’t cover damage due to neglect.
If the water damage is the result of flooding, the incident will not be covered under the homeowners insurance. Flood insurance is mandatory. In some regions the flood policies are demanded by mortgage lenders. Flooding can be caused by storms, flooding ground, overflowing bodies of water or overflowing or surging bodies such as streams, lakes, rivers and oceans.
- Acalanes Ridge
- Aetna Springs
- Alamo Oaks
- Alderglen Springs
- Alhambra Valley
- Alliance Redwood
- American Canyon
- Bay Point
- Bayo Vista
- Bethel Island
- Birds Landing
- Black Oaks
- Black Point
- Black Point-Green Point
- Bodega Bay
- Boyes Hot Springs
- Camino Tassajara
- Camp Meeker
- Camp Rose
- Castle Hill
- Chabot Terrace
- Contra Costa Centre
- Corte Madera
- Cuttings Wharf
- Cypress Grove
- Deer Park
- Del Rio Woods
- Dillon Beach
- Discovery Bay
- Duncans Mills
- East Richmond Heights
- East Windsor
- El Bonita
- El Campo
- El Cerrito
- El Verano
- Enchanted Hills
- Fetters Hot Springs
- Fetters Hot Springs-Agua Caliente
- Five Brooks
- Forest Hills
- Forest Knolls
- Fort Ross
- Glen Ellen
- Glen Frazer
- Goat Rock
- Green Valley
- Guadalcanal Village
- Guernewood Park
- Harry Floyd Terrace
- Inverness Park
- Lagunitas-Forest Knolls
- Las Gallinas
- Las Juntas
- Leisure Town
- Los Medanos
- Lucas Valley
- Lucas Valley-Marinwood
- Maine Prairie
- Marin City
- Mark West Springs
- Marsh Creek Springs
- McNears Beach
- Mill Valley
- Mirabel Heights
- Mirabel Park
- Mission Highlands
- Montalvin Manor
- Monte Rio
- Monte Rosa
- Mount Jackson
- Muir Beach
- Napa Soda Springs
- Nicks Cove
- Noel Heights
- Norris Canyon
- North Gate
- North Richmond
- Northwood Heights
- Northwood Lodge
- Oak Knoll
- Ocean Roar
- Orinda Village
- Pleasant Hill
- Point Reyes Station
- Pope Valley
- Port Costa
- Reliez Valley
- Rio Nido
- Rio Vista
- Rock City
- Rohnert Park
- Russian River Terrace
- Salmon Creek
- San Anselmo
- San Geronimo
- San Miguel
- San Pablo
- San Quentin
- San Rafael
- San Ramon
- Sand Hill
- Santa Rosa
- Santa Venetia
- Sea Ranch
- Sears Point
- Sereno del Mar
- Shell Ridge
- Shipyard Acres
- Shore Acres
- Silverado Resort
- Sleepy Hollow
- Spanish Flat
- St. Helena
- Stewarts Point
- Stinson Beach
- Stony Point
- Suisun City
- Summerhome Park
- Tamalpais-Homestead Valley
- Tara Hills
- Timber Cove
- Two Rock
- Vacation Beach
- Valley Ford
- Veteran Heights
- Vichy Springs
- Villa Grande
- Vine Hill
- Waldrue Heights
- Walnut Creek
- Walnut Heights
- Walsh Landing
- Walter Springs
- West Hartley
- Wilson Grove