Water damage restoration service – Lombard

Homeowners in Lombard suffer burst pipe damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

Water damage is more common when water seeps into a building or house by way of a flood, storm, or burst pipes. Sometimes the damage is evident and evident. Other times, it’s more subtle or unreported.

It is more complicated than just drying out the interior of the building to repair water damage. Modern techniques for water damage repair, such as Critical Control, can often reduce damage that would normally have required total structural replacement.

Water Damage Restoration Guidelines Are In Place so call a Professional

A lot of times, property or home owners try to tackle water damage with DIY solutions that can be found online. This is a bad idea. There are guidelines to deal water damage that call on the tools and skills of professionals. These guidelines are included in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is created because of the necessity of professional standardisation in situations involving water destruction to buildings and homes and the dangers they can present.

Critical Control, a restoration firm, is able to use IICRC guidelines to help them determine the extent and type of the project’s damages.

There are many reasons why water damage experts should follow these guidelines. In certain circumstances, the use of an Indoor Environmental Professional (IEP) is required. An IEP is an individual who has the skills and training to evaluate an area for contamination collect samples, perform lab tests and provide us with advice regarding the kind of water damage that is likely to occur.

This is especially important in cases where the building’s inhabitants could be at risk, there is a likelihood of adverse health consequences, or the occupants express a need to identify the suspected contaminants, or some other reason that there might be concerned about contamination.

Categories and Classes of Water Damage


Projects for water damage restoration are divided into two categories according to the extent of the infiltration of water is.

The class has to do with how polluted the water entering the structure is. Category 1 is water that originates from a clean source, such as the sink or tub, or a burst water supply.

Category 2 water contains significant levels of contaminants and can cause illness if it is consumed or in contact with. It could include sources that might not appear to be dangers, such as the discharges from washing machines, or overflows from toilets.

Category 3 water is grossly polluted, meaning it could have pathogenic, toxigenic or other harmful substances in it. This usually means contamination from toilet backflows following the trap for toilets and seawater, flooding from rivers and streams, or any other source of water that comes from the building exterior. This kind of water could have pesticides, heavy metals that are regulated, toxic materials, or chemicals in it.


We can also use the IICRC’s courses to determine how much water has penetrated your property. The system is basically a set of guidelines for the saturation of the building or home.

Class 1 is the smallest amount of water and absorption. This happens the case when water comes in contact with less than 5% of building substances that absorb water. This is usually the case in which the majority of substances affected by water have low in evaporation, which means that they don’t soak up and retain water. Concrete, finished/coated wood, masonry or plaster.

Class 2 means that there is significant absorption of water and intrusion. It means that anywhere between 5% and 40% of the combined ceiling, floor and wall is constructed from low-evaporation substances like wood, concrete, plaster, or masonry.

Class 3 is the term used to describe 40% or more of the wall, floor and ceiling surfaces are porous such as fiberboard, insulation, carpet etc. and other materials that don’t absorb water like concrete or cement have not been negatively affected.

Water has been absorbed by materials such as concrete as well as wood, plaster, and even wood, which are classified as Class 4. This requires more drying time and special drying techniques.

How to Dry a Water Damaged House or Building


Physical extraction, dehumidification and evaporation are three methods to remove water from buildings. The elimination of water that is liquid is at minimum 500 times more efficient than just putting up with dehumidifiers and air mover. The faster the structure is dried, the better. Both methods of extraction and dehumidification are affected by how much material is being removed.

Professionals dealing with water damage use a variety methods. Some of our tools include tools for subsurface extraction, wands Self-propelled tools, self-propelled instruments, and vacuum squeegees.

Forced Evaporation

After as much water is removed, the remaining moisture is then dried by high-speed airmovers.

A submerged object absorbs moisture and water when it’s wet. The result is that the material gets dampened or wet.

Saturation is defined as the point where it becomes unachievable for air to hold any moisture. The higher the humidity, the more close the air is to saturation.

In the evaporation process in which water molecules are ejected from a liquid to a gaseous state. This process is known as evaporation.

This signifies that the object is no longer able to absorb moisture from the air. This is referred to as the saturation point. Once the saturation point is reached drying will begin.

In the evaporation stage high-efficiency air mover dry the object from two sides. They create strong airflow which is controlled by a filter system.

Air mover is able to move around 10 to 20% more air than a fan, or even a regular household fan.

The object is dried by airmovers about 10 times faster than in natural conditions where no air mover was used.

Airflows with high velocity dry the surface and absorbs the water drawn out by the air movement.

Utilizing Heat To Aid In the Drying Process

One of the most essential elements of any restoration is the use of heat. In order to dry out any materials which have been affected by water, we make use of various types of heaters.

Electric Heaters These heaters are perfect for drying tasks that require the use of several different heating sources. It is possible to run several heaters simultaneously because of their many power ratings.

Electric heat can also be capable of being shut off or reduced while the job is in process, but without impacting other heaters. This means that you could turn one heater down while increasing the power of another to maximize efficiency, and decrease your energy costs.

Electric heaters are very common in restoration projects since they emit virtually no emissions and use minimal amounts of water. However, the only drawback is that they take longer to warm up, which means that they require more time to dry process overall.

Hydronic Bioler (TES),: The boilers quickly heat up and emit very little emissions. They can be run on natural gas or propane.

Hydronic boilers differ from electric heat because they don’t use forced-air heat to disperse heat. This makes it difficult to heat large areas evenly with these heaters. They also run at an lower temperature, making ideal for drying projects that require walls and ceilings to be left unattended.

They are also commonly employed when there isn’t enough electricity to power electric heaters. Because they’re so effective at producing radiant heat, they are able to easily keep your drying area warm even when there is no electric power source.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to keep buildings dry as well as houses that have suffered water damage.

The LGR Home Dehumidifier can extract 170 pints water from damp structures that have experienced severe water damage within 24 hours.

In addition to extracting water from the air, like an LGR Refrigerant Dehumidifier does, the home dehumidifier will also remove as much as 99% of airborne mold spores the air by eliminating condensation.

Repairing Wood Floor Water Damage

It is essential to take away flooring that has been damaged by water to allow repairs to be made starting from the subflooring.

The subflooring has to be taken off and repaired before. Next, the hardwood boards damaged need to be replaced or sanded. In order to ensure a uniform appearance, all floors should be sanded and repaired after these repairs have been completed.

Water Damage To Carpeting

Floods can cause significant damages to your house and cause it to be expensive and time-consuming. Even if the water is taken away from the affected area immediately, there is an opportunity that you’ll need to replace the flooring in the future.

It’s devastating to discover that your house isn’t in top condition after you have spent lots of time and money to restore it.

In this regard, it is important to assess the severity of the damages as soon as you can. One of the first things that must be resolved is whether or not the affected area needs to be replaced. There is a good possibility that the carpet could be maintained and cleaned once it is dry, and this cleaning will eliminate some of the worries about the growth of mildew and the lingering smells.

Salvaging Carpet After a Water Damage Event

If the damage from water is very extensive, it is possible that you will have noticeable marks on your carpet. There are times when you have to replace your flooring in order to remove the stains. An odor that is persistent and strong may also be the reason to replace your carpeting. If this is the case then you may require replacement of both the padding and carpet.

Then, consider if your floor can be dried professionally before deciding whether you want to change it. A professional service will aid you in determining the severity of the damages were. We can evaluate whether or not the carpet should be replaced or can be salvaged. If the carpet you have is damaged, a few drying methods could further harm it.

A few of the factors that determine whether or whether the padding and carpet require replacement are:

Do your carpets need to be dried and cleaned, or disinfected and cleaned professionally?

The carpet’s ability to remain clean can be affected if the padding beneath it has been damaged. Although your carpet might have been dried immediately, the possibility of mildew development is present if the padding under it has not dried out as well.

The most secure way to make sure that your carpet is cleaned and disinfected following a flood is to hire a professional carpet cleaning company. Once the company has completed their work, you will be capable of making an informed decision about the state of your carpet and determine whether or not you need to replace it.

Drywall that has been damaged by water

The extent of damage will determine the kind and way to repair drywall. Repairing water damage may be as simple as removing the drywall portion and then cleaning the affected area and then putting it back.

The flip side of the coin is that major damage could need to be repaired completely, including walls studs and fiberglass insulation.

Water damaged drywall often harbors mold spores that cannot be easily removed. Therefore, in the majority of cases the drywall needs to be replaced. We utilize moisture testing tools that allow us to determine where and how extensive the water has grown. This helps us identify damaged areas and limit the cost to those areas that are only damaged.

Water can cause structural damage as well, because it causes the wood to expand or expand or contract. It is easier to break wood when it has been moistened with water. The wood will get brittle if allowed to dry in water for too long.


This issue can be prevented by owners of buildings and homeowners immediately taking action to repair structural damage from moisture-related problems with their property following a flood or other water-related damage.

Foundation Water Damage

Water damage to a house’s foundation can occur for a number of reasons. Although not all water problems cause structural damage, it is important to correct foundational issues as soon as possible to prevent further structural damage.

Foundation water damage can result in a myriad of problems based on how it’s dealt with. It can cause severe structural damage if the issue isn’t addressed quickly.


Roof Water Damage

Like foundation water damage, roof water damage is quite common following natural catastrophes. Roof damage can cause roof leaks, and can also cause damage to the foundations of a structure or house.

Roof leaks are expensive and can have serious drawbacks. The roof’s leaks could lead to mold growth that could be fatal. A leaking roof may also harm the roof truss system that can lead to structural damage to the roof.

If you don’t address leaks in your ceiling right away, they can cause the rafters to decay and then soften. Electrical problems are also common in roof water damage, which can cause the possibility of an electrical fire. All of these are good reasons to have roof water damage dealt with immediately following a flood, or any other unexpected damage.

HVAC Water Damage

Your home can be damaged by structural damage if the HVAC system is not working properly or the wrong equipment is put in place. You are putting your home and business at risk by not having HVAC. The growth of mold can cause serious health issues.

Pipe water damage

Water damage to pipes is typically caused due to a pipe burst within your home. Once you have determined that there has been an issue, it is important for you to contact a professional to stop the flow of water and ensure it doesn’t lead to structural damage.

The burst of pipes can cause amount of damage. The water can get into your home through damaged pipes, causing extensive damage. It could cause structural damage.

As soon as you notice water damage to your pipe that is not repaired close off the water supply.

What is the price of restoring water damage?

Water damage restoration cost per square foot

Repair and cleanup cost will differ based on how many square feet you have. The following breakdown of pricing is available from National Flood Services for each square foot

Will Water Damage Be Covered By the Homeowner’s Insurance?

If the cause of the damage was unintentional and sudden the homeowners insurance policy will usually cover it. The Insurance Information Institute states that homeowners insurance can cover the repair or replacement of damaged windows but not for damages due to negligence.

Neglect can be described as damage to a surface or an object that results from exposure, inadequate maintenance, or general degradation. According to the American-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

A homeowner’s insurance policy will not be able to cover damage to water due to flooding. The flood insurance policy is mandatory. In some regions where flood insurance is required, it’s usually by mortgage companies. Flooding can be caused by storms, flooding the ground or overflowing bodies of water or overflowing or surging bodies such as streams, lakes, rivers and oceans.