Water damage restoration service – Lowell

Building owners in Lowell experience burst pipe damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

When a storm, flood, or burst pipe causes water to enter a house or building, water damage occurs more often than not. Sometimes the damage is visible and obvious, but sometimes it’s subtle or even hidden.

It’s more difficult than just drying the interior of the building to repair water damage. With modern professional water damage remediation tactics typically restorers such as Critical Control can mitigate damage which would in the past would have required total reconstruction of the structure, or in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are readily available Contact a Professional

A lot of times, property or home owners attempt to address water damage by using DIY solutions available online. This is a mistake. Water damage can be managed in accordance with the established guidelines. These guidelines demand the expertise and equipment of professionals. The guidelines are set forth in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the need for professional standardisation of situations that involve water destruction to buildings and homes as well as the risk they present.

Critical Control, a restoration business, can use IICRC guidelines to help them assess the type and extent of the damage each project has sustained.

These guidelines are crucial for professionals dealing with water damage. There are instances that require the use of an Indoor Environmental Professional (IEP). An IEP is professional with the experience and knowledge to examine the health of a building and collect samples, conduct lab tests, and then help us determine the kind of water damage.

This is particularly important in situations where the building’s inhabitants are at high risk or have concerns regarding contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are classified by category and class, based on the degree of flooding of water.

The category has to do with how dirty the water entering the structure has been. Category 1 means that the water originates from a clean source such as burst water supply, or a sink or tub.

Category 2 water has significant levels of contaminants and could cause illness if it is inhaled or touched. This can include sources which might not appear to be a threat such as discharges from washing machines, or overflows from toilets.

The water in the category 3 is considered to be highly contaminated. It could contain pathogenic, toxic, or other harmful substances. It can be caused by sewage backflows, leaks from toilet traps, as well as the flooding of streams and rivers. This kind of water could contain heavy metals, pesticides, regulated materials or toxic chemicals in it.


It is also possible to use the IICRC’s classes to determine just how much water has penetrated your property. This is basically a guideline for how much saturated a structure or home is.

The lowest degree of water absorption , and the highest amount of water is classified as Class 1. This is where the water comes in contact with about 5percent or less of construction materials which absorb water. This is due to the fact that most of the materials that are affected by water don’t absorb or hold water. Examples are concrete, finished/coated wood, masonry or plaster.

Class 2 refers to absorption of water and intrusion. It means that anywhere between 5% to 40% of the total floor, ceiling and wall is made of materials with low-evaporation, such as wood, concrete, or masonry.

The porous materials like fiberboard, insulation and carpet that comprise Class 3 comprise around 40 percent of the floor, wall and ceiling materials. This includes approximately 40% of the materials in Class 3. Other materials such as cement or plaster that don’t absorb water have not been affected in any way.

Class 4 means that water has become deeply trapped in the materials that can not easily absorb water as concrete, wood, and bricks and mortar. This means that it requires longer drying times and special drying methods.

How to Dry a Water damaged Building or House


Three ways of removing water from buildings are physical extraction, dehumidification, and evaporate. Eliminating water from liquids is, at a minimum, 500 times more efficient than using dehumidifiers or air movers. The quicker the structure dries the better. Both methods of extraction and dehumidification will be affected by the amount of much stuff is being extracted.

Water damage professionals use various extraction methods. Our tools include tools for subsurface extraction, wands, self-propelled tools, and vacuum squeegees.

Forcible Evaporation

The remaining moisture is dried with high-velocity air movers after the maximum amount of water is taken away.

If an object is wet or submerged in water, it absorbs a portion of the water or moisture. The object becomes damp or wet due to this.

Saturation is defined as the point where it becomes unachievable for air to hold any moisture. The greater the humidity, the closer the air is to saturation.

The evaporation phase is the moment when water molecules shift from the state of liquid to a gaseous state. This is known as evaporation.

In another way the object does not absorb any more moisture from the air. This is called the saturation point. As soon as saturation is reached, the drying process begins.

In the evaporation stage, highly-efficient air moves dry the object on two sides. They produce strong airflow that is controlled by a filtering system.

A fan that moves air can transport between 10 and 20 percent more air than a fan, or even a regular fan in your home.

The item is dried by airmovers around 10 times faster than in natural conditions where no air mover was employed.

High-velocity airflow dry the surface and absorbs moisture drawn out by the airflow.

Use heat to assist the drying process.

Heat is an important component of any water damage restoration task. We make use of a variety heaters to dry out materials that have been damaged by water.

Electric Heaters They are ideal for drying tasks that require multiple heat sources. This is due to the fact that they come in a variety of power levels, which allows you to use multiple heaters at the same time.

You can also turn down or off electric heat while the job is being done, without affecting other heaters. To increase efficiency and reduce your energy bills it is possible to adjust the wattage of one heater, while also increasing its wattage.

Since they produce virtually no carbon dioxide and require minimal water Electric heaters are used in restoration projects. The only issue is they take longer to get hot, which requires more time for the drying process generally.

Hydronic Bioler (TES),: These boilers are able to heat quickly and emit very little carbon dioxide. They can be run on propane or natural gas.

Hydronic boilers differ from electric heaters since they don’t utilize forced air heat to distribute heat. This makes it difficult to evenly heat large areas using these heaters. They also operate at an lower temperature, making them perfect for drying tasks that require walls and ceilings to be left unattended.

If electric heaters are not used, hydronic boilers can frequently be employed. They can generate radiant heat, and they can keep your drying area warm without the need for an electric source.


To keep buildings and homes dry that are damaged due to flooding, we make use of Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier is capable of removing 170 pints of water in a damp building which has been badly affected by water damage each 24 hours.

Apart from removing water from the air as a LGR Refrigerant Dehumidifier does this, the home dehumidifier can also eliminate as much as 99% of airborne mold spores in the air by eliminating condensation.

Repairing Hardwood Floor Water Damage

It is important to remove flooring that has been damaged by water to ensure that repairs can be done by removing the subflooring.

The damaged subflooring first needs to be taken off and fixed. The hardwood floors affected need to be replaced or sanded. To ensure a uniform appearance flooring, all floors should be sanded down and repaired after these repairs are completed.

Carpets Damaged by Water

Floods can cause significant damage to your home and can make repairs costly and difficult to repair. Even if water is eliminated from the area right away, there’s the possibility that you’ll need to replace the flooring in the future.

After spending time and money to restore your home back to its original state, it could be depressing to discover that the finished results leave some things to be desired.

This is why it is essential to evaluate the extent of damages as soon as you can. The first thing to do is to determine if the damaged area requires replacement. There is a way to clean the carpet and then use it again after drying. This can alleviate any worries about mildew growth or persistent smells.

Salvaging Carpet After a Water Damage Event

If the damage from water is very extensive It is likely that you’ll notice marks on your carpet. In some instances the only option to remove these stains is to change the flooring. An odor that is persistent and strong may also be the reason to replace your carpeting. It is necessary to change your carpet and padding if this happens.

Check to see if the floor can be professionally dried before deciding whether you want to change it. If you have a reliable company do the cleaning, you’ll have a better understanding of just how bad the water damage was. Our firm will examine your carpet and determine whether it’s worth replacing or re-usable. If the carpet you have is damaged, certain drying techniques can further damage it.

A few of the factors that will determine whether or whether the padding and carpet require replacement are:

Are your carpets dry and cleaned, or disinfected and cleaned professionally?

If the padding beneath your carpet is damaged, this can affect how long the carpet is clean. Although your carpet has been dried in a short time, mildew growth can still occur when the padding beneath is not dried.

Professional carpet cleaning company is the best option to make sure your carpeting is dry and clean following an event of flooding. After the job is completed, you’ll be able take a shrewd decision on the state of your carpeting. You’ll also be able to determine whether to replace it.

Drywall Damaged by Water

The drywall repair procedure varies based on the extent of damage. Water damage repair can be as easy as removing the drywall section, cleaning it, and then replacing it.

On the other hand of the coin, severe damages could necessitate a total wall replacement, including walls studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to remove. In the majority of cases the drywall needs to be replaced. We employ moisture testing instruments to assess the extent of moisture. This allows us to pinpoint damaged areas and limit costs to those areas that are only damaged.

Water also causes structural damage because it causes the wood to expand and shrink. After the wood has been moistened with water, it’s much easier to break. The wood may get brittle if left to dry in water for too long.


In order to counteract this issue, it’s important for homeowners and building owners to address structural damages from water-related issues with their properties immediately following a flood or water damage occasion.

Water Damage in the Foundation

There are numerous reasons why water damage could affect the foundation of a house. Although not all water problems can lead to structural damage, it is important to correct foundational problems as quickly as you can in order to avoid any further structural damage.

Foundation water damage can cause a number of different issues in the manner it is addressed. It can cause severe structural damage if the issue isn’t addressed promptly.


Roof Water Damage

Roof water damage can also be caused by natural disasters, just like foundation water damage. Roof damage can lead to roof leaks as well as damage the foundation of a house or the foundation of a home.

Roof leaks are expensive and can have serious drawbacks. Roof leaks can cause mold to grow, which can prove fatal. Leakage in the roof can also cause damages to the roof truss.

Leaks in the ceiling can cause your rafters to deteriorate and become soft if you don’t deal with them right away. Electrical faults are also prevalent when it comes to roof water damage which could cause the possibility of an electrical fire. These are all good reasons to get roof water damage taken care of quickly after a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system is failing or brand new equipment is found to be defective, it could result in the structure of your home. Your business and your home at risk in the absence of HVAC. It is possible for mold to grow and result in a range of health issues that are very serious.

Water damage to pipes

Damage to pipes typically caused by a ruptured pipe in your home. If you’ve determined there is an issue, it is important to seek out professional assistance to stop the flow of water and ensure that it doesn’t lead to structural damage.

A ruptured pipe can result in devastating damage. The water can get into your home through damaged pipes, which can cause severe damage. This could lead to structural damage.

As soon as you notice water damage to your pipe that is not repaired close off the water supply.

What is the cost of the restoration of water damaged?

Water damage restoration cost per square foot

Cleaning and repair cost will differ based on how much square footage you own. National Flood Services has the following breakdown of pricing for each square foot:

Are water damage covered By Homeowner’s Insurance?

If the cause was accidental and sudden the homeowners insurance policy generally cover it. The Insurance Information Institute states that homeowners insurance will provide for the repair or replacement of broken windows however, it does not cover damage caused by negligence.

Neglect is defined as damage to a surface or an object that is the result of exposure, poor maintenance or general degradation. The Insurance Information Institute in the USA states that homeowners insurance does not cover the damage caused by negligence.

A homeowners policy would not cover water damage due to flooding. Rather, a flood policy would be required. Mortgage lenders might need flood insurance in some regions. Flooding may occur as a result of storms, ground that is saturated to the point of overflowing or surging bodies of water such as lakes, rivers, ponds, streams, oceans when combined with strong winds.