Flooding damage repair – May Valley

Building owners in May Valley experience flood damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water gets into a structure or home via a flood, storm, or burst pipes. Sometimes, the damage is obvious and evident. In other instances, it’s subtle or under-reported.

Water damage remediation is much more complicated than just drying out the interior. Modern professional techniques for water damage repair such as Critical Control, can often minimize damage that otherwise would have required total structural replacement.

Water Damage Restoration Guidelines Exist and you can call an Professional

Many times, homeowners and builders try to fix water damage with DIY methods that can be discovered online. This is a mistake. There are guidelines for dealing water damage that call on the skills and tools of professionals. The guidelines are set forth in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is necessary to ensure that there is a professional standardisation for situations involving water damage to structures or homes, as well as the associated risks.

Critical Control, a restoration company, can use the IICRC guidelines to help them evaluate the severity and nature of the project’s damages.

These guidelines are essential for professionals who deal with water damage. In certain circumstances, the use of an Indoor Environmental Professional (IEP) is essential. An IEP is a person with the knowledge and experience to analyze the condition of a place, take samples, run lab tests and provide us with advice regarding the type of water damage.

This is especially important in cases where the building’s inhabitants are at risk or are concerned about contamination.

Water damage according to categories and classes


Water damage restoration projects are classified according to category and class, based on the extent of the flooding of water.

The class refers to how contaminated the water that entered the structure was. The first category is water that is clean such as an unclean sink or tub, or burst water supply.

Category 2 is water that has significant levels of contaminants and is likely to cause discomfort of illness if contacted or consumed. This can include sources which may not normally seem like an issue, like the discharge from washing machines or overflows from toilets.

The water in the category 3 is considered to be highly contaminated. It could contain toxic, pathogenic, or any other harmful substances. This can be caused by backflows of sewage, toilet trap leaks, and the flooding of rivers and streams. This water can be contaminated by pesticides, heavy metals or other toxic substances.


You can also utilize the IICRC’s classes to determine just how much water has gotten into your property. This is basically setting guidelines for the saturation of the structure or the home.

The lowest level of water absorption and the highest amount of water is classified as Class 1. It is the case when water comes into contact about 5% or less with building materials which absorb water. This is typically the case that the majority of the building substances affected by water have low evaporation, meaning, they do not absorb or hold in water. Concrete, plaster, masonry, and wood that has been finished/coated are some of the examples.

Class 2 indicates that there is substantial infiltration of water as well as intrusion. This is about 5% up to 40% of the combined floor, wall and ceiling comprised of low-evaporation materials such as plaster, concrete, wood or masonry.

The porous materials like fiberboard, insulation and carpet, that make up Class 3 comprise around 40 percent of wall, floor and ceiling materials, including around 40% in class 3. and other materials that do not take in a lot of water, such as plaster or concrete have not been adversely affected.

The water has been absorbed into substances like concrete or plaster and wood that are classified as Class 4. This will require more time to dry and special drying techniques.

How do you dry a water damaged Building or House


Three ways to remove water from buildings include physical extraction, dehumidification, and evaporate. Eliminating liquid water is at most 500 times more effective than using dehumidifiers or air movers. The faster the structure dries, the better. The amount of stuff to be extracted can affect both dehumidification and extraction techniques.

Professionals dealing with water damage use a variety methods. We make use of a variety of tools , including subsurface extraction tools as well as self-propelled tools.

Forcible Evaporation

After the water is removed, any moisture remaining is dried with high-speed airmovers.

When an object gets wet or submerged in water, it absorbs some of the water or moisture. The material becomes damp or wet as a result.

The level of saturation is referred to as the point where it becomes impossible to contain any more moisture. More humid means that the air is getting closer to saturation.

In the evaporation stage, water molecules jump from a liquid to a gaseous state. The process is called evaporation.

This signifies that the object is no longer able to absorb moisture from the atmosphere. The saturation point is the point at which evaporation begins. As soon as saturation has been reached the drying process commences.

High-efficiency air movers dry objects in two areas during the evaporation process. They produce strong airflow that is controlled by a filtering system.

An air mover can transport between 10 and 20 percent more air than a fan, or even a regular fan in your home.

Airmovers dry the object approximately 10 times more quickly than natural conditions, where there is no air movement.

The high-speed airflow dry the surface and absorbs the water that was pulled away by the air movers.

Using Heat To Assist the Drying Process

Heat is an important component of any water damage restoration task. To dry out materials damaged by water, we use various types of heaters.

Electric Heaters These heaters are perfect for drying jobs that require various heating sources. This is due to the fact that they are available in several different wattages, allowing you to run multiple heaters simultaneously.

You can also turn down the electric heating while the job is being done, and not affect other heaters. To increase efficiency and reduce the cost of energy, you can adjust the wattage of one heater and increase its power.

Electric heaters are a common feature in restoration jobs because they produce essentially no emissions and use only a small amount of water. The only issue is they take longer to heat up, requiring longer drying time. process generally.

Hydronic Bioler (TES) Hydronic Bioler (TES) These boilers heat up quickly and emit very little carbon dioxide. They typically operate with propane or natural gas.

Hydronic boilers are different from electric heating in the sense that they don’t use forced-air to distribute heat. Therefore, it may be difficult to evenly heat an space with these kinds of heaters. They can also be utilized to dry jobs that do not require walls or ceilings to be able to stand in place.

When electric heaters cannot be used, hydronic boilers can frequently be employed. Because they are so efficient at producing radiant heat, they are able to easily keep your drying space warm even without an electrical power source.


We use Low Grain Refrigerant Dehumidifiers (LGR) to dry buildings and homes that have experienced water damage.

The LGR Home Dehumidifier is capable of removing 170 pints of water in a damp building that is severely damaged by water damage every 24 hours.

The dehumidifier in your home can remove water from the air in the same manner it does an LGR Refrigerant Dehumidifier. It will also eliminate up to 99 percent of the airborne mold spores by removing condensation.

Repairing Hardwood Floor Water Damage

Hardwood floors damaged by water have to be cut up to ensure repairs can take place beginning with the subflooring and moving upwards.

The subflooring needs to be removed and repaired prior to. The hardwood floors damaged need to be replaced or sanded. When the repairs are finished and the floor is finished, it should be sanded, refinished and polished to ensure uniformity.

Carpets are prone to water damage

Floods can cause serious damages to your house and cause it to be costly and difficult to repair. Even if water is removed from the affected region immediately, there’s an opportunity that you will have to replace your flooring eventually.

It would be devastating to discover that your home is not in the best condition after you have spent many hours and dollars to repair it.

In this regard, it is crucial to determine the extent of damages as soon as you can. The first step is to determine if the damaged area needs to be replaced. There’s a chance that the carpet will be cleaned and used after drying, and this cleaning will eliminate some of concerns regarding the growth of mildew and the lingering smells.

Salvaging Carpet After a Water Damage Event

If the water damage is very extensive, it is possible that you’ll notice marks on your carpet. There are times when you have to change your flooring to eliminate these stains. Another reason that might prompt you to consider replacing your carpeting is the persistent and strong odor. It’s time to replace your carpet padding and padding if this happens.

Then, consider if your flooring can be dried professionally before you decide whether to change it. If you’ve got a reliable company do the cleaning, you’ll have a better idea of how severe the water damage was. Our team will evaluate your carpet and determine if it should be replaced or repairable. If the carpet you have is already damaged, certain drying methods can cause further damage to it.

Some of the considerations which will decide whether or whether the padding and carpet require replacement are:

Are your carpets dry or cleaned professionally?

The carpet’s ability to stay clean is affected when the padding beneath it is damaged. Even though your carpet may have been dried immediately, the possibility of mildew growth is still present if the padding beneath it is not dried out as well.

The best way to be sure that your carpeting is properly cleaned and disinfected following a flood is to hire an expert carpet cleaning service. Once the company has completed their job, you’ll be in a position to make an informed decision about the state of your carpeting and decide whether or not you need to replace it.

Water Damaged Drywall

The procedure for repair of drywall differs depending on the severity of the damage. Repairing water damage can be as simple as removing some drywall and cleaning the area and then replacing it.

The opposite of this is that serious damage could require whole-wall replacement including fiberglass insulation and wall studs.

The spores of mold can be seen in damaged drywall, which is difficult to remove. In most cases, the drywall will have to be replaced. We use moisture testing equipment that help us determine how large and where the humidity has gotten. This helps us identify areas of damage and limit the costs to the areas that are damaged in a way that is necessary.

Water can also cause structural damage, as it causes the material to expand or shrink. It is much easier to break wood when it has been moistened by water. If the water remains for a long period of time, it could cause an extensive amount of rot within the wood, which could make it break easily.


In order to counteract this problem, it’s essential for homeowners and building owners to take care of structural damage caused by water-related issues with their properties immediately following a flood or water damage event.

Water Damage to the Foundation

There are numerous reasons why water damage can cause to a foundation of a house. While not every water issue can lead to structural damage, it’s important to address foundation issues as quickly as is possible in order to avoid any future structural damage.

The damage caused by water in the foundation could cause various issues in the manner it is dealt with. It could cause serious structural damage if it isn’t addressed promptly.


Roof Water Damage

As with foundation water damage roof water damage is very common after natural disasters. Roof damage can lead to roof leaks, and can also cause damage to the foundation of a building or house.

Roof leaks are expensive and can have serious drawbacks. Leaks in the roof can result in mold and mildew to grow, which can cause death. A leaky roof can harm the roof truss system, which can cause structural damage to the roof.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you do not deal with them right away. Roof water damage can also be caused by electrical faults that can cause an electric fire. All of these are good reasons to have roof water damage dealt with promptly following a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system starts to fail or brand-new equipment is found to be defective, it could cause the structure of your house. Your business and your home at risk in the absence of HVAC. Mold growth can lead to serious health issues.

Damage to pipes caused by water

If you’re suffering from pipe water damage, the water is most likely coming from a ruptured pipe inside your home. Once you’ve determined there’s an issue, it’s essential to contact an expert to stop the water from creating structural damage.

A ruptured pipe can result in devastating damage. The water can get into your home through broken pipes, causing severe damage. This could lead to structural damage.

If you spot broken pipe water damage stop the supply of water.

What’s the cost for restoring water damage?

Water damage restoration cost per square foot

Depending on the square foot the repair and cleanup costs can vary. National Flood Services has the below pricing breakdown for each square foot:

Can Water Damage be covered by the homeowner’s insurance policy?

If the cause was unintentional and sudden homeowners insurance policies will usually cover it. The Insurance Information Institute states that homeowners insurance can be used to pay for repairs or replacement of windows that have been damaged but not for damages caused by neglect.

Neglect is defined as damage to a surface or an object that is caused by exposure, poor maintenance or general wear and tear. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance doesn’t cover damage due to neglect.

A homeowner’s insurance policy will not be able to cover damage to water due to flooding. Instead, a flood insurance policy would be necessary. Mortgage lenders might need flood policies in certain areas. Flooding can be caused by floods, storms and overflowing bodies, or overflowing or surging bodies like streams, lakes, rivers and oceans.