Water damage remediation – Midtown

Homeowners in Midtown suffer burst pipe damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

The most common cause of water damage is when water enters a building or home through a storm, flood, or burst pipe. Sometimes, the damage is obvious and obvious, but sometimes it is minor or hidden.

Water damage remediation is much more complicated than just drying out the interior. Modern techniques for water damage remediation typically restorers such as Critical Control can mitigate damage which would in the past would have required complete structural replacement, that is to say, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are readily available Contact a Professional

Many times, homeowners or builders attempt to repair water damage with DIY solutions located on the internet. This is inadvisable. There are guidelines for dealing with water damage and they require the tools and skills of professionals. The guidelines are laid out in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide exists because of the necessity for professional standardisation of situations that involve water damage to homes and buildings and the risks they pose.

The IICRC guidelines help restoration professionals like Critical Control to evaluate the category and class of damages on every project.

There are a lot of reasons that water damage professionals must adhere to these guidelines. There are certain situations that require our bringing in the services of an Indoor Environmental Professional (IEP). An IEP is a person who has the skills and training to evaluate the condition of a place, take samples, run lab tests, then give us advice on the kind of water damage that is likely to occur.

This is particularly important in cases where the building’s occupants are at high risk or there is concern regarding contamination.

Categories and classes of Water Damage


Projects for water damage restoration are divided into two categories according to the extent of the infiltration of water is.

The classification refers to how contaminated the water that enters the structure is. Category 1 means that the water is from a clean source such as a burst water supply or even a sink or tub.

Category 2 involves water that has high levels of contaminants, and could be able to cause discomfort of illness if contacted or consumed. The sources could be water that is not obvious as a risk, such as the discharge from washing machines or spills from toilets.

The water in the category 3 is considered highly contaminated. It could be contaminated by toxic, pathogenic, or other hazardous substances. Most often, this is due to contamination by toilet backflows following the trap for toilets, seawater, water flooding from rivers and streams or any other source of water that comes from the building exterior. The water could include heavy metals, pesticides or other toxic substances.


The IICRC has also established classes we use in determining the degree of water intrusion on your property. This system is basically an outline of the amount of water a building or home ought to be.

Class 1 means the least amount of absorption and the amount of water. This is when water is in contact with less than 5% the building substances that absorb water. This is due to the fact that most of the substances affected by water won’t retain or absorb water. Concrete or plaster, masonry and wood that has been finished/coated are some of the examples.

Class 2 means that there is a significant absorption of water and intrusion. This means that between 5% to 40% of the total ceiling, floor and wall is constructed of materials with low-evaporation, such as wood, concrete or masonry.

Class 3 refers to the fact that around 40% or more of the flooring, walls and ceiling surfaces are porous materials such as fiberboard, insulation, carpet etc. Other materials such as cement or plaster that don’t absorb water have not been affected in any way.

Class 4 refers to the fact that water has been deeply bound in materials that do not easily absorb water like concrete, wood, and the masonry. This requires more drying time and special drying methods.

How do you dry a water damaged home or Building Works


Three methods for removing water from buildings are physical extraction, dehumidification and the process of evaporation. Removal of liquid water is at least 500 times more effective than just having to put up with dehumidifiers or air mover. The quicker the structure can dry the more effective. The extraction method and the dehumidification process are affected by how much material is being removed.

Water damage professionals use an array of extraction techniques. Our tools include subsurface tools, wands, self-propelled tools, and vacuum squeezers.

Forced Evaporation

After the water has been removed, any moisture remaining is dried with high-speed airmovers.

If an object is wet or submerged in water, it absorbs some of the water or moisture. The object gets wet or damp due to this.

The saturation level is referred to as the point at which it becomes impossible to contain any additional moisture. The higher the humidity, the more close the air is getting to saturation.

In the evaporation process in which water molecules are ejected from liquid state to gaseous state. This is known as the process of evaporation.

This means that the object no longer absorbs moisture from the atmosphere. This is referred to as the saturation point. Once the saturation point is reached drying begins.

In the process of evaporation, highly-efficient air moves dry the object on two sides. They create a strong air flow over the surface of the object which is directed by a filter system that covers the entire area of the object.

An air mover moves around 10-20 times more air than a fan , or the typical household fan.

The object is dried using airmovers around 10 times faster than the natural environment where there was no air movement.

Airflows with high velocity leaves the surface dry and absorbs the water pulled out by the airflow.

Utilizing Heat To Aid In the Drying Process

Heating is a crucial element of any restoration task. We make use of a variety heaters to dry the materials that have been damaged by water.

Electric Heaters They are ideal for drying jobs that require multiple heating sources. This is because they come in a variety of energies, which lets you run multiple heaters simultaneously.

Electric heat is also capable of being turned down or off during the process, but without impacting other heaters. This means that you can lower one heater, while raising the wattage of the other to increase efficiency, and decrease your cost of energy.

Electric heaters are common in restoration jobs since they emit virtually zero emissions and consume minimal amounts of water. However, the only drawback is that they take longer to heat up, requiring more time for the drying process overall.

Hydronic Bioler (TES): They are also extremely efficient at quickly heating up yet releasing very little emissions. They can be powered by natural gas or propane.

Hydronic boilers are different from electric heat as they don’t make use of forced-air heat to disperse heat. This makes it difficult to heat large areas evenly with these heaters. They are also able to dry jobs that do not require walls or ceilings to be in the same place.

They are also commonly employed when there isn’t enough electricity to power electric heaters. They can produce radiant heat, and they can keep your drying space warm without the requirement of an electrical source.


To dry houses and buildings that are damaged due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of water in an un-dry structure which has been badly damaged by water damage each 24 hours.

The dehumidifier in your home can remove water from the air in the same manner it does an LGR Refrigerant Dehumidifier. It can also eliminate up to 99 percent of the airborne mold spores by removing condensation.

Repairing Wood Floor Water Damage

Water damaged hardwood floors need to be removed so that repairs can be made beginning with the subflooring and moving upwards.

The subflooring has to be removed and repaired first. Then the affected hardwood boards must be sanded or replaced. To ensure uniformity flooring, all floors should be sanded down and repaired after these repairs have been made.

Carpets are vulnerable to water damage

If you’ve been unfortunate enough to have an incident of flooding in your home this can be a stressful and expensive experience. You might need to change your flooring, even if you have removed the water from the area as soon as is possible.

After investing time and money in restoring your home to its pre-flood condition, it would be depressing to discover that the finished results leave some things to be desired.

Because of this, it is important to assess the severity of the damage as soon as possible. First thing to do is to determine if the damaged area requires replacement. There’s a possibility that the carpet could be cleaned and still used once it is dry, and this cleaning will eliminate some of the worries about the growth of mildew and the lingering smells.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting if the damage to your carpet was severe. There are times when you have to replace your flooring to get rid of the stain. A strong, lingering odor may also be the reason to change your carpet. If this is the case, then you will likely need to replace both your carpet and padding.

The next step to determine whether or not you need to replace your carpet is to find out if the floor can be dried and cleaned professionally. If you can have a reputable company perform the cleaning, you’ll have a better understanding of just how bad the water damage was. We can evaluate whether or not the carpet should be replaced or saved. Be aware that some methods employed for drying may further damage the carpet even if it’s already in poor condition.

Many factors determine the decision of whether padding or carpet need to be replaced.

Are your carpets professionally cleaned, dried, and cleaned?

The carpet’s ability to stay clean can be affected if the padding beneath it has been damaged. Even though your carpet is dried fast, the growth of mildew is still possible if the padding underneath isn’t dried.

The safest way to ensure that your carpet is restored and disinfected after an event of flooding is to engage an expert carpet cleaning service. Once the cleaning is complete you’ll be able to make an informed decision on the state of your carpeting. It is also possible to decide whether to replace it.

Drywall Damaged by Water

The process for repairing drywall varies according to the extent of the damage. Repairing water damage is simple as taking out the drywall section, cleaning it, and then replacing it.

On the other hand of the coin serious damage could require a complete wall replacement, which includes walls studs and fiberglass insulation.

Water damaged drywall often harbors mold spores that can’t be removed easily. So in most cases, drywall will need to be replaced. We utilize moisture testing tools that allow us to determine where and how extensive the moisture has become. This helps us identify damaged areas and limit costs to the areas that are damaged in a way that is necessary.

Water also causes structural damage because it causes the material to expand and shrink. When the wood is saturated with water, it’s much more difficult to break. If the water is left to sit for a prolonged time, there can be an extensive amount of rot in the wood, which could cause it to crack easily.


This issue can be prevented by homeowners and building owners immediately taking action to repair structural damage from moisture-related problems with their property following a flood or other damages caused by water.

Foundation Water Damage

Damage to a home’s foundation can be caused by various reasons. Although not all water problems can lead to structural damage, it’s important to address foundation issues as soon as possible in order to avoid any further structural damage.

Water damage to the foundation can trigger many different problems depending on how it is addressed. It could cause serious structural damage if not taken care of quickly.


Roof Water Damage

Roof water damage can also be caused by natural disasters, just like foundation water damage. In addition to causing roof leaks, roof damage can cause problems with the walls or the foundation of a house or the building.

Roof leaks can be costly and can have serious drawbacks. Roof leaks can cause mold to grow and can be fatal. A roof that is leaky could cause damage to the roof truss system and cause structural damage to the roof.

Leaks in the ceiling can cause your rafters to decay and soften if you do not address them immediately. Electrical faults are also common in the case of roof water damage that can lead to the possibility of an electrical fire. These are all good reasons to get roof water damage repaired promptly following a flood or other type of unexpected damage.

HVAC Water Damage

Your home can be damaged structurally if your HVAC system fails or is defective equipment is put in place. If you do not have HVAC it is exposing the inside of your house or business to all sorts of issues. The growth of mold can lead to a number of very serious health problems.

Pipe Water Damage

Damage to pipes typically caused by a burst pipe within your home. If you’ve discovered an issue, it’s important to call a professional to stop the water from damaging the structure.

A burst pipe can cause devastating damage. Water can enter your home via broken pipes, which can cause severe damage. It could cause structural damage.

As soon as you notice water damage to your pipe that is not repaired stop the water supply.

What’s the cost for the restoration of water damages?

Water damage restoration cost per square foot

Cleaning and repair costs will vary depending on the square footage you own. National Flood Services has the following pricing breakdown per square foot.

Does water damage get covered by homeowners’ insurance?

If the cause was accidental and sudden homeowners insurance policies will usually cover it. The Insurance Information Institute states that homeowners insurance will cover the repair or replacement of broken windows but not for damages caused by neglect.

Neglect can be described as damage to an object or surface that is caused by the weather, lack of maintenance or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

A homeowner’s policy does not be able to cover damage to water due to flooding. The flood insurance policy is mandatory. In some regions the flood policies are demanded by mortgage companies. Flooding can occur due to floods, storms or overflowing bodies of water, or overflowing or surging bodies like streams, lakes, rivers and oceans.