Water damage restoration service – Monroe

Property owners in Monroe get hit with burst pipe damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water gets into a structure or home through a storm, flood, or burst pipes. Sometimes, the damage is obvious and evident, while other times it’s hidden or minor.

It is more complicated than just drying out the interior to fix water damage. With modern professional techniques for water damage remediation, often restorers like Critical Control can mitigate damage that would in the past would have required complete structural replacement, that is to say, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines Are In Place and you can call an Professional

Oftentimes, home or building owners attempt to address water damage using DIY solutions found online. This is a mistake. There are guidelines for dealing with water damage , and they depend on the equipment and expertise of professionals. These guidelines are available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure professional standardisation of scenarios involving water damage buildings or homes, and the associated risks.

Critical Control, a restoration business, can use IICRC guidelines to determine the extent and type of each project’s damage.

There are many reasons that water damage professionals must follow these guidelines. In some situations, the use of an Indoor Environmental Professional (IEP) is necessary. An IEP is a professional who has the experience and knowledge to examine a site for contamination, collect samples, get lab testsand advise us on the category of water damage.

This is crucial when the building’s occupants might be high risk, there is a likelihood of adverse health effects, the occupants are required to determine the suspected contaminants, or some other reason that there might be concerned about contamination.

Categories and Classes of Water Damage


Water damage restoration projects are classified by category and class based on the degree of flooding of water.

The classification has to do with how contaminated the water that entered the structure is. The category 1 indicates that the water comes from a clean source, such as a burst water supply or even a sink or tub.

Category 2 involves water that has high levels of contaminants and has the potential to cause discomfort or illness should it be consumed or ingested. This can include sources which may not normally seem like dangers, such as the discharges from washing machines, or toilet overflows.

Water in Category 3 can be considered to be extremely polluted. It could contain pathogenic, toxic, or other harmful substances. This usually means contamination from sewage, toilet backflows after the trap for toilets and seawater, flooding from streams and rivers, or any other water arising from the exterior of the building. This kind of water could include heavy metals, pesticides, regulated materials or toxic substances within it.


The IICRC has also created classes to follow when determining the degree of water intrusion on your property. This is basically a guideline for the amount of water a building or house ought to be.

The lowest degree of absorption by water and the most water is classified as Class 1. This is the case when water comes in contact with less than 5% construction materials that absorb water. This is due to the fact that most of the substances that are affected by water do not absorb or hold water. Concrete and masonry, as well as plaster and coated or finished wood are only a few examples.

Class 2 means that there is a significant absorption of water and intrusion. This means that between 5% to 40% of the ceiling, floor and wall is constructed from low-evaporation substances like wood, concrete, or the masonry.

The porous materials, such as fiberboard, insulation and carpet, that make up Class 3 comprise around 40 percent of the floor, wall and ceiling materials, including around 40% in class 3. and also where other materials that do not absorb water like plaster or concrete have not been adversely affected.

Class 4 refers to the fact that water has become deeply bound in materials that do not easily absorb water like wood, plaster, concrete and masonry. This means that it requires longer drying times and special drying techniques.

How Drying a Water Damaged home or Building Works


Physical extraction, dehumidification, and evaporation are the three main ways to get rid of water from buildings. Removal of liquid water is at about 500 times more efficient than simply making do with dehumidifiers and air moving machines. The faster the structure dries the more effective. Both methods of extraction and dehumidification will be affected by the amount of much stuff is being extracted.

Water damage professionals use different extraction techniques. We make use of a variety of tools including subsurface extraction tools and self-propelled tools.

Forced Evaporation

The remaining moisture is dried with high-velocity air movers after as much water as possible is removed.

A submerged object absorbs water and moisture once it’s wet. The result is that the material becomes dampened or wet.

Saturation is defined as the point at which it becomes impossible for air to hold any moisture. A higher humidity indicates that the air is closer to saturation.

The evaporation stage is the time when water molecules change from a liquid state to a gaseous one. The process is called evaporation.

This means that the object no longer absorbs moisture from the air. This is known as the saturation point. the point of evaporation. Once the saturation point is reached drying begins.

High-efficiency air movers dry the object on both sides during the evaporation phase. They produce a powerful airflow over the entire surface, that is controlled by a filter system that is able to cover the entire surface of the object.

An air mover can move between 10 and 20 percent more air than an ordinary fan, or even a regular fan used in the home.

Air movers dry the object around 10 times faster than normal conditions, when there is no air movement.

The high-speed airflow dry the surface and draws in the moisture that has been drawn out by the air mover.

Make use of heat to help in the drying process

A key component of any restoration work is heat. We use a variety of heaters to dry materials that are damaged by water.

Electric Heaters These heaters are perfect to dry jobs that require multiple heating sources. This is because they can be found in various wattages, allowing you to use multiple heaters at the same time.

Electric heat is also able to be turned down or off when the work is in process, but without impacting other heaters. To increase efficiency and reduce the cost of energy, you can adjust the power of one heater, while also increasing its wattage.

Because they emit almost no carbon dioxide and require less water, electric heaters are very used in restoration projects. They take longer to warm up and need longer drying time.

Hydronic Bioler (TES) These boilers are extremely efficient at heating up quickly yet releasing low emissions. They are typically run with propane or natural gas.

Hydronic boilers are different from electric heating because they don’t use forced-air heat to distribute heat. This can make it difficult to evenly heat large areas with these heaters. They can also be used to dry out jobs that do not require ceilings or walls to be in place.

They are also commonly used when there is no power available to run electric heaters. They can produce radiant heat and can keep your drying area warm without the need for an electric source.


To dry buildings and houses that have been damaged by flooding, we use low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier is capable of extracting 170 pints of water from a damp building that is severely affected by water damage each 24 hours.

The dehumidifier in your home can remove water from the air in the same way as an LGR Refrigerant Dehumidifier. It can also eliminate the 99 percent or more of airborne mold spores by eliminating condensation.

Repairing Hardwood Floor Water Damage

It is crucial to get rid of the hardwood floors that have been damaged by water so that repairs can be completed by removing the subflooring.

Subflooring that is damaged first has to be taken off and fixed. The hardwood floors damaged need to be sanded or replaced. After these repairs are completed then the entire floor must be sanded and then refinished to guarantee a uniform appearance.

Water Damage to Carpeting

Floods can cause significant damage to your home and make it expensive and time-consuming. Even if the water is taken away from the affected area immediately, there is an opportunity that you’ll have to replace your flooring eventually.

After investing time and money in restoring your home to its pre-flooding condition, it will be devastating to find that the finished results leave some things to be desired.

In this regard, it is essential to evaluate the extent of damages as soon as you can. One of the first issues that must be resolved is whether the damaged area should be replaced. It is possible to wash the carpet and use it after drying. This can eliminate worries about mildew growth or persistent scents.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpet if the damage from water was extensive. In certain instances, the only way to remove these stains is to change the flooring. An odor that is persistent and strong can also be an indication to get your carpet replaced. If it is it is likely that you’ll have to replace your carpet and padding.

The next step to determine whether or not you need to replace your carpeting is to determine if the floor can be dried and cleaned professionally. If you have a reputable company perform the cleaning, then you’ll have a better understanding of how serious the damage was. We can determine if your carpet should be replaced or can be salvaged. If your carpet is damaged, certain drying methods can cause further damage to it.

Several factors will influence the decision of whether padding or carpet need to be replaced.

Do your carpets get professionally cleaned, dried, and cleaned?

If the padding under your carpet is also damaged, it could affect the time that your carpet can last. Even though your carpet may have dried quickly however the risk of mildew development is present if the padding under it is not dried as well.

The most secure way to make sure that your carpeting is properly restored and disinfected after an event of flooding is to engage an expert carpet cleaning service. When the firm has finished their work, you will be in a position to make an informed decision about the condition of your carpet and decide whether or not to change it.

Drywall damaged by water

The severity of the damage determines the nature and technique of repair. Repairing water damage may be as easy as taking out some drywall and then cleaning the affected area and then putting it back.

On the other side of the coin, significant damage might necessitate whole wall replacement, which includes walls studs and fiberglass insulation.

There are spores of mold in damaged drywall, which is hard to get rid of. Most of the time the drywall needs to be replaced. We use moisture testing equipment that help us determine the extent to which water has grown. This allows us to pinpoint damaged areas and limit costs to the only damaged ones.

Water can cause structural damage as well, because it causes the wood to expand or shrink. It is easier to break wood when it is moistened by water. The wood may be brittle if kept in the water for too long.


This problem can be avoided by homeowners and building owners taking immediate action to fix structural damage from moisture-related issues with their property after an event like a flood or water-related damage.

Foundation Water Damage

There are numerous reasons why water damage could affect the foundation of a house. While not all water issues could cause structural damage, it is important to address foundation problems as quickly as you can to prevent further structural damage.

The water damage from foundations can result in a myriad of problems depending on how it’s dealt with. If the problem isn’t taken care of promptly, it could cause serious structural damage.


Roof Water Damage

As with foundation water damage roof water damage is also fairly common after natural catastrophes. As well as the possibility of roof leaks, roof damage can also cause issues with the walls and the foundation of a house or the building.

Roof leaks are expensive and may have significant drawbacks. Leaks in the roof may cause mildew and mold to develop, which could be deadly. The leaks in the roof could cause damage to the roof truss system.

Leaks from the ceiling could cause your rafters to decay and become soft if you don’t address them immediately. Electrical faults are also common in roof water damage, that can lead to the possibility of an electrical fire. All of these are good reasons to have your roof water damage repaired quickly after a flood or other sudden damage.

HVAC Water Damage

If your HVAC system starts to fail or brand-new equipment is found to be faulty, this can definitely result in structural damage to your house. If you do not have HVAC, you are exposing the inside of your house or business to all kinds of problems. Mold growth can lead to severe health issues.

Pipe water damage

Pipe water damage is usually caused due to a pipe burst within your home. When you’ve discovered that there’s been leak, it’s crucial to seek out professional assistance to stop the leak and make sure it doesn’t cause structural damage.

A burst pipe can cause severe damage. When your pipes break, water may enter your home, creating extensive damages and necessitating repairs for water damage – an event that could result in structural damage.

If you spot water damage to your pipe that is not repaired stop the supply of water.

What is the cost of the restoration of water damages?

Water damage restoration cost per square foot

Based on the square feet, water damage repairs and cleanup expenses can vary. National Flood Services has the below pricing breakdown per square foot.

Are water damage covered by the homeowner’s insurance policy?

Insurance policies for homeowners are typically used if the damage is sudden and not intentional. The Insurance Information Institute states that homeowners insurance may be used to pay for repairs or replacement of broken windows however, it does not cover damage caused by neglect.

Damage caused by neglect can be described as wear and tear on the surface or object due to exposure, lack of preventative upkeep or general deterioration. According to the American-based Insurance Information Institute, homeowners insurance does not cover damage from neglect.

If the water damage resulted from an event that is a flood, it will not be covered under homeowner’s insurance. Flood insurance is mandatory. In certain areas where flood insurance is required, it’s usually by mortgage lenders. Flooding can happen due to storms, flooding ground, overflowing bodies of water, or overflowing or surging bodies like streams, lakes, rivers and oceans.