Flood damage restoration service – Montalvin Manor

Building owners in Montalvin Manor get hit with burst pipe damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

When a storm, flood or burst pipes cause water to seep into a home or building water damage is more often than not. Sometimes the damage is evident and apparent. Other times, it’s more subtle or unreported.

Remediation of water damage is more complex than just drying the interior. With modern professional techniques for water damage remediation, often restorers like Critical Control can mitigate damage that previously would have required complete structural replacement, that is to say, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are Available – Call a Professional

A lot of times, homeowners or builders attempt to repair water damage with DIY solutions that can be found online. This is not advisable. Water damage can be controlled according to the established guidelines. These guidelines demand the knowledge and skills of professionals. These guidelines are detailed in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. The guide was created due to the necessity of professional standardisation in situations involving water damage to homes and buildings as well as the risk they create.

Critical Control, a restoration firm, is able to use IICRC guidelines to help them determine the extent and type of each project’s damage.

These guidelines are important for professionals dealing with water damage. There are instances that require our bringing in an Indoor Environmental Professional (IEP). An IEP is an expert who has the experience and knowledge to examine a site for contamination, collect samples, get lab testsand advise us on the category of water damage.

This is especially important in situations where the building’s occupants are at high risk or there is concern about contamination.

Water damages caused by categories and classes


Projects for water damage restoration can be classified into two types in accordance with the degree of the infiltration of water is.

The category refers to how polluted the water entering the structure has been. Category 1 implies that the water originates from a clean source such as a water source that burst, or even a sink or tub.

The category 2 water contains significant amounts of contaminants and has the potential to cause illness or discomfort if contacted or consumed. These sources can be water that isn’t obvious as a danger such as the effluent from washing machines or overflows from toilets.

The water in the category 3 is classified as extremely polluted. It may contain pathogenic, toxic, or other hazardous substances. Usually this means contamination from sewage, toilet backflows after the trap for toilets, seawater, water flooding from rivers and streams, or any other source of water that comes from the exterior of the building. The water in this category could include heavy metals, pesticides and regulated substances as well as toxic substances within it.


You can also utilize the IICRC’s classes to determine just how much water has gotten into your property. This is basically a guideline for how saturated a building or home should be.

Class 1 refers to the lowest amount of absorption and water. It is the case the case when water comes in contact with less than 5% of the building substances that absorb water. This is because most substances affected by water do not absorb or hold water. Examples are concrete, finished/coated wood, plaster or masonry.

Class 2 signifies that there is a significant infiltration of water as well as intrusion. It is approximately 10% up to 40% of the combined floor, wall and ceiling comprised of low-evaporation materials such as plaster, concrete, wood or masonry.

Class 3 refers to the fact that around 40 percent or more of flooring, walls, and ceiling surfaces are porous like carpet, insulation, fiberboard and so on. and also where other materials that don’t absorb much water such as concrete or cement have not been adversely affected.

Class 4 refers to the fact that water has been deeply stuck in materials that do not easily absorb water as wood, plaster, concrete and masonry. This requires more drying time and special drying methods.

How to Dry a Water Damaged House or Building


Three ways of removing water from buildings are physical extraction, dehumidification, and the process of evaporation. The elimination of water that is liquid is at least 500 times more effective than just having to put up with dehumidifiers or air moving machines. The quicker the structure is dried more efficiently. The amount of stuff to be extracted will influence both extraction and dehumidification techniques.

Water damage experts employ an array of extraction techniques. We use a variety of tools including subsurface extraction tools and self-propelled tools.

Forced Evaporation

The remainder of the moisture gets dried with high-velocity air movers after the maximum amount of water is taken away.

Submerged objects absorb water and moisture once it’s moistened. In the process, the material becomes dampened or wet.

Saturation is the time where it becomes unachievable for air to hold any moisture. Higher humidity means that the air is closer to saturation.

The evaporation phase is the moment when water molecules shift from the state of liquid to a gaseous form. The process is referred to as evaporation.

In this way, the object no longer absorbs additional water from the atmosphere. This is known as the saturation point. Once saturation is reached, drying will begin.

High-efficiency air movers dry objects on both sides in the evaporation phase. They produce a powerful air flow over the surface of the object, that is controlled by a filter that is able to cover the entire surface of the object.

An air mover moves around 10-20 times more air than an ordinary fan.

The item is dried using airmovers around 10 times faster than in natural conditions in which there was no air movement.

A high-velocity airflow dries the surface and absorbs the water that was drawn away by the air movement.

Utilizing Heat To Aid In the Drying Process

One of the most essential elements in any water damage restoration is heating. We employ a variety of heaters to dry the materials that are damaged by water.

Electric Heating Equipment: These heaters can be used to dry jobs that require multiple heat sources. You can run multiple heaters simultaneously due to their many Wattages.

Electric heat can also be able to be shut off or reduced while the job is in process, but without impacting other heaters. In order to maximize efficiency and lower the cost of energy it is possible to adjust the power of one heater and increase its wattage.

Electric heaters are very common in restoration jobs since they emit virtually zero emissions and consume very little water. The only downside is that they take longer to heat up, requiring more time for the drying process overall.

Hydronic Bioler (TES),: These boilers are able to heat quickly and emit very little emissions. They are typically run on natural gas or propane.

Hydronic boilers are different from electric heat in that they don’t use forced-air to distribute heat. Therefore, it may be challenging to evenly heat an area using these kinds of heaters. They also run at a lower temperature, making them ideal for drying jobs which require ceilings and walls to remain in place.

If electric heaters are not utilized, hydronic boilers can typically be utilized. Because they are extremely efficient at producing radiant heat, they are able to easily keep your drying space warm even without an electrical power source.


To dry buildings and houses that are damaged due to water damage, we use low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints water from a damp structure that is severely damaged by water damage each 24 hours.

The dehumidifier in your home can remove water from the air in the same manner as an LGR Refrigerant Dehumidifier. It can get rid of up to 99 percent of the airborne mold spores by eliminating condensation.

Fixing Wood Floor Water Damage

Water damaged hardwood floors need to be ripped up so repairs can occur from the subflooring upwards.

The subflooring needs to be taken off and repaired before. The damaged hardwood boards require sanding down or replaced. When the repairs are finished then the entire floor must be sanded and refinished to guarantee a uniform appearance.

Water Damage To Carpeting

If you have had the misfortune of experiencing flooding in your house it could be a stressful and expensive experience. Even if the water has been eliminated from the area immediately, there is an opportunity that you will have to eventually replace the flooring.

After spending time and money restoring your home back to its pre-flood condition, it would be devastating to find that the end result leaves some things to be desired.

It is vital to identify the extent of damage as soon as possible. One of the first things that must be resolved is whether or not the damaged region should be replaced. It is possible to clean the carpet and use it after drying. This will eliminate any worries about the growth of mildew or persistent smells.

Salvaging Carpet After a Water Damage Event

If the water damage is severe there is a chance that you’ll notice marks on your carpet. In certain instances, the only way to remove the stains is to replace the flooring. A strong, lingering odor can also be an indication to replace your carpeting. If it is it is likely that you’ll have to replace the padding and carpet.

The next step to determine whether or not you need to replace your carpeting is to determine whether the flooring is able to be professionally cleaned and dried. If you can have a reputable company perform the cleaning, then you’ll have a better idea of how severe the water damage was. We will be able to evaluate whether or not the carpet should be replaced or can be saved. Be aware that some methods employed to dry the carpet can further damage the carpet when it is already in bad condition.

Several factors will influence the decision of whether padding or carpet need to be replaced.

Are your carpets dry or cleaned professionally?

If the padding under your carpet is also damaged, it can impact the time that your carpet is clean. Although your carpet has been dried fast, the growth of mildew is still possible if the padding underneath is not dried.

The best way to be sure that your carpeting is properly restored and disinfected after an event of flooding is to engage an expert carpet cleaning service. Once the company has completed their work, you will be in a position to make an informed decision about the state of your carpet and determine whether or not to replace it.

Drywall that has been damaged by water

The degree of damage determines the kind and technique of repair. Water damage repair can be simple as taking out an area of drywall then cleaning it and after that, replacing it.

On the other side of the coin severe damage might necessitate whole reconstruction of the wall, which could include walls studs and fiberglass insulation.

Drywall that has been damaged by water often contains mold spores which can not be easily removed. In most cases the drywall will need to be replaced. We utilize moisture testing tools which allow us to identify where and how extensive the water has grown. This allows us to pinpoint damaged areas and limit the cost to the only damaged ones.

Water can also cause structural damage, because it causes the wood to expand or contract. It is much easier to break wood if it has been moistened by water. The wood can be brittle if left to dry in water for too long.


This issue can be prevented by building owners and homeowners making immediate changes to repair water-related structural issues with their property after an event like a flood or water damage.

Water Damage in the Foundation

There are a variety of reasons that water damage could affect the foundation of a home. While not all issues with water result in structural damage, it’s crucial to address foundational issues as quickly as possible to avoid structural damage.

The water damage from foundations can result in a myriad of problems based on how it is dealt with. If the problem isn’t treated quickly, it could result in serious structural damages.


Roof Water Damage

Water damage to roofs can result from natural disasters similar to foundation water damage. Roof damage can lead to roof leaks as well as damage the foundations of a structure or the foundation of a home.

Roof leaks can be costly and may have significant drawbacks. A leak in the roof can cause mildew and mold to grow, which can cause death. The leaks in the roof could also result in damages to the roof truss.

If you don’t fix the leaks in your ceiling promptly the risk is that the rafters to decay and then soften. Electrical problems are also common in roof water damage, that can lead to the possibility of an electrical fire. All of these are excellent reasons to have roof water damage fixed quickly following a flood or other unexpected damage.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system fails or is defective equipment is put in place. Without HVAC, you are exposing the inside of your business or home to all kinds of problems. The growth of mold can lead to a number of very serious health problems.

Damage to Pipes from Water

If you’re suffering from pipe water damage, the water is likely to be from a pipe that has burst in your home. Once you’ve determined there’s a leak, it is important to call a professional to stop the water from causing structural damage.

The burst of pipes can cause lot of damage. When pipes are damaged and water enters your home, causing extensive damage and requiring repairs for water damage – a process that can result in structural damage.

If you spot broken pipe water damage close off the water supply.

What’s the price to fix the damage caused by water?

Water damage restoration cost per square foot

Based on the square foot the water damage repair and cleanup costs differ. The following pricing breakdown can be obtained at National Flood Services for each square foot

Can Water Damage be covered By Homeowner’s Insurance?

If the cause of the damage was sudden and unintentional the homeowners insurance policy will usually cover it. According to the Insurance Information Institute, homeowners insurance can cover repairs or replacement for a broken window, but not if the damage is a result of negligence.

Neglect can be described as damage to an object or surface that is caused by exposure, inadequate maintenance, or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance doesn’t cover damage caused by negligence.

A homeowner’s insurance policy will not be able to cover damage to water caused by flooding. Flood insurance is mandatory. Mortgage lenders might require flood policies in certain areas. Flooding can occur due to storms, flooding ground, overflowing bodies of water or the overflowing or surge of bodies such as streams, rivers, lakes and oceans.