Water damage restoration service – Moraga Blvd

Building owners in Moraga Blvd suffer water damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

Damage to water is more frequent when water gets into a structure or home via a flood, storm or burst pipes. Sometimes the damage is overt and obvious, but sometimes it’s subtle or even hidden.

It is more complicated than just drying out the interior to repair water damage. With modern professional methods for water damage restoration Restoration companies like Critical Control can mitigate damage which, in the past, would have required complete reconstruction of the structure, or in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are in place and you can call an Professional

Oftentimes, home or building owners attempt to deal with water damage by using DIY solutions available online. This is inadvisable. Water damage can be controlled according to established guidelines. These guidelines call for the expertise and equipment of professionals. The guidelines can be available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure the professional standardisation of instances involving water damage to houses or buildings, and the risks associated with it.

The IICRC guidelines assist restoration experts like Critical Control to evaluate the kind and severity of the damages on every project.

These guidelines are important for water damage professionals. There are certain situations that require us to bring in an Indoor Environmental Professional (IEP). An IEP is a professional who has the training to assess the health of a building take samples, perform lab tests, and then provide us with the type of water damage.

This is especially important in cases where the building’s residents are at high risk or are concerned regarding contamination.

Water destruction caused through categorizes and classes


Water damage restoration projects are classified by category and class based on the degree of invasion of water.

The classification has to do with how contaminated the water entering the structure was. Category 1 water comes from a clean source, such as a tub or sink or a water source that bursts.

The category 2 water has significant levels of contaminants and is likely to cause discomfort of illness when inhaled or consumed. It could include sources that might not appear to be dangers, such as the discharge from washing machines or overflows from toilets.

The water in the category 3 is considered to be extremely polluted. It could be contaminated by toxic, pathogenic, or other dangerous substances. This could be due to sewage backflows, leaks from toilet traps, as well as water flooding from rivers and streams. This category of water can contain heavy metals, pesticides, regulated materials or toxic substances in it.


The IICRC has also created classes that we follow in determining the degree of water intrusion into your property. This is basically setting guidelines for the saturation of the building or home.

Class 1 means the least amount of water and absorption. It is the case when water is in contact with less than 5% of building materials that absorb water. This is typically the case in which the majority of items affected by water are low in evaporation, which means that they do not absorb or hold water. Concrete or plaster, masonry and coated or finished wood are only several examples.

Class 2 indicates that there is a significant infiltration of water as well as intrusion. This is about 5% up to 40% of the total ceiling, floor and wall consist of low evaporation materials such as plaster concrete, wood, or bricks and mortar.

Class 3 refers to the fact that around 40 percent or more of wall, floor, and ceiling surfaces are porous materials like fiberboard, insulation, carpet, etc. Other materials such as concrete or plaster that don’t absorb water haven’t been adversely affected.

Class 4 means that water is stuck in materials that do not easily absorb water as wood, plaster, concrete and masonry. This calls for special drying techniques and longer drying times.

How to dry a water damaged building or house


Three ways of removing water from buildings include physical extraction, dehumidification, and evaporate. Eliminating liquid water is typically 500 times more efficient than airmovers. The faster the structure is dried, the more efficient. Both methods of extraction and dehumidification will be affected by the amount of much stuff is being extracted.

Water damage experts use a variety methods. Some of our tools include subsurface tools, wands Self-propelled tools, self-propelled instruments, and vacuum squeegees.

Forced Evaporation

The remaining moisture is dried by high-speed airmovers after the maximum amount of water has been taken away.

When an object is moistened or submerged in water, it absorbs a portion of the water or moisture. The result is that the object becomes damp or wet.

Saturation is defined as the point at which it becomes impossible for the air to contain any moisture. A higher humidity indicates that the air is more close to saturation.

In the evaporation phase the water molecules leap from a liquid to a gaseous state. This is called evaporation.

This signifies that the object is no longer able to absorb moisture from the atmosphere. The saturation point is the point at which evaporation begins. Once the saturation point is reached drying will begin.

In the evaporation stage the highly efficient air moves dry the object on two sides. They generate strong airflow that is controlled by a filtering system.

Air mover is able to move between 10 and 20% more air than a fan, or an ordinary fan used in the home.

The item is dried using air movers approximately 10 times faster than natural conditions where no air mover was used.

High-velocity airflow removes the moisture from the surface and absorbs the water pulled out by the airflow.

Utilizing Heat To Aid In the Drying Process

One of the most essential elements in any water damage restoration work is heating. In order to dry out any materials which have been affected by water, we employ various types of heaters.

Electric Heaters: These heaters may be used to dry jobs which require multiple sources of heat. You can run multiple heaters simultaneously due to their many power ratings.

Electric heat can also be capable of being reduced or turned off while the job is in process, without affecting your other heaters. This means you can turn one heater down while raising the wattage of another one to improve efficiency and reduce your energy costs.

Electric heaters are a common feature in restoration work because they produce essentially no emissions and use only a small amount of water. They take longer to heat up and take more time for drying.

Hydronic Bioler (TES) These boilers are extremely efficient at quickly heating up yet releasing low emissions. They can be run on natural gas or propane.

Hydronic boilers are different from electric heat since they don’t utilize forced air heat to distribute heat. This makes it difficult to distribute heat evenly over large areas by using these heaters. They also operate at less temperature, which makes them ideal for drying jobs which require ceilings and walls to be left in place.

Hydronic boilers are also often used in situations where there is no electrical power to run electric heaters. They can produce radiant heat and can keep your drying area warm without the need for electricity.


We employ Low Grain Refrigerant Dehumidifiers (LGR) to help dry out buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can remove 170 pints of water from damp structures that have experienced extensive water damage within 24 hours.

The dehumidifier in your home can remove water from the air in the same manner it does an LGR Refrigerant Dehumidifier. It can get rid of up to 99 percent of the mold spores that are airborne through the elimination of condensation.

Fixing Wood Floor Water Damage

It is essential to take away water damaged hardwood floors to allow repairs to be done from the subflooring up.

Subflooring that is damaged first has to be taken off and fixed. Then the affected hardwood boards require sanding down or replaced. To ensure uniformity flooring, all floors should be sanded, then refinished after these repairs have been made.

Carpets are susceptible to water damage

If you have had the misfortune of experiencing a flood in your home, it can be a stressful and expensive experience. Even if the water has been removed from the affected region immediately, there’s an opportunity that you’ll have to replace the flooring in the future.

After spending time and money to restore your home to its pre-flood condition, it would be depressing to discover that the final results leave something to be desired.

In this regard, it is essential to evaluate the severity of the damage as quickly as is possible. First thing to do is to determine if the damaged part requires replacement. It is possible to wash the carpet and use it once dry. This can eliminate worries about the growth of mildew or persistent scents.

Salvaging Carpet After a Water Damage Event

If the water damage has been very severe there is a chance that you will have noticeable stains on your carpeting. In certain instances the only option to eliminate these stains is to replace the flooring. Another reason that might prompt you to think of replacing your carpeting is a persistent and strong scent. It’s time to change your carpet and padding when this happens.

Then, consider if your floor can be dried professionally before deciding whether you want to replace it. If you have an established company that can handle the cleaning, you’ll have a better understanding of just how bad the water damage was. Our company will assess your carpet and determine whether it is best to replace it or re-usable. Remember that some of the techniques employed to dry the carpet can further damage the carpet even if it’s already in bad condition.

Several factors will influence whether the carpet or padding is a good idea to replace it.

Do your carpets get professionally dried, cleaned, and disinfected?

If the padding under your carpet has been damaged, this can affect how long the carpet will remain clean. Although your carpet might be dry but the chance of mold growth is present if the padding beneath it is not dried as well.

The best way to be sure that your carpeting is properly cleaned and disinfected following flooding is to employ an expert carpet cleaning service. Once the company has completed their job, you’ll be able to make a more informed decision about the state of your carpet and determine whether or not you need to change it.

Water Damaged Drywall

The degree of damage will determine the kind and technique of repair. Water damage repair can be as easy as removing a section of drywall, cleaning it, and then replacing it.

The flip side of the coin is that serious damage could require whole-wall replacement including fiberglass insulation and wall studs.

Mold spores can be found in damaged drywall, which is hard to get rid of. In the majority of cases the drywall will need to be replaced. We utilize moisture testing tools to assess the extent of moisture. This allows us to isolate the areas that are damaged and limit the costs to areas that need to be repaired.

Water also causes structural damage because it causes the wood material to expand and expand and contract. When the wood is saturated with water, it’s much more difficult to break. The wood may be brittle if kept in the water for too long.


This problem can be avoided by building owners and homeowners immediately taking action to repair water-related structural issues that affect their property after flooding or other water damage.

Water Damage to the Foundation

There are a variety of reasons that water damage can cause to a foundation of a house. Although not all water problems could cause structural damage, it is important to correct foundational issues as soon as possible to avoid future structural damage.

Foundation water damage can cause a variety of issues based on the way it is dealt with. It could cause serious structural damage if not treated quickly.


Roof Water Damage

Similar to foundation water damage roof water damage is very common after natural disasters. Roof damage can cause roof leaks, and can also cause damage to the foundations of a building or house.

Roof leaks are expensive and can have serious drawbacks. Roof leaks can result in the growth of mold, which can prove fatal. A leaking roof may also harm the roof truss system and cause structural damage to the roof.

Leaks in your ceiling could cause your rafters’ to degrade and become soft if you don’t take action immediately. Water damage to the roof could result from electrical issues, which can lead to an electrical fire. All of these are excellent reasons to get roof water damage repaired swiftly following a flood or other unexpected damage.

HVAC Water Damage

Your home could be damaged by structural damage if the HVAC system fails or is defective equipment is put in place. You are putting your business and home at risk because you do not have HVAC. Mold growth can occur and lead to a number of serious health issues.

Damage to pipes caused by water

Damage to pipes typically caused due to a pipe burst within your home. Once you have determined that there has been an issue, it is important for you to contact a professional to stop the leak and make sure it doesn’t lead to structural damage.

A pipe that bursts can cause severe damage. The water can get into your home through broken pipes, causing severe damage. This can lead to structural damage.

As soon as you notice water damage to your pipe that is not repaired close off the water supply.

What is the cost of cleaning up water damages?

Water damage restoration cost per square foot

Based on the square foot the water damage repair and cleanup costs vary. The following pricing breakdown can be obtained at National Flood Services for each square foot

Are water damages insured by the homeowner’s insurance?

If the cause was sudden and unintentional, homeowners insurance policies typically cover the damage. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement of a damaged window, but not when the damage was the result of negligence.

Neglect can be described as damage to a surface or object that is the result of exposure, inadequate maintenance, or general wear and tear. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance does not cover damage due to neglect.

A homeowners policy would not cover water damage due to flooding. A flood policy is required. In certain areas the flood policies are demanded by mortgage lenders. Flooding can occur because of storms, ground that is saturated to the point of and surging or overflowing bodies water like lakes, rivers, ponds rivers, oceans, and streams in combination with high winds.