Water damage remediation – Neal

Property owners in Neal get hit with flood damage regularly. Whether you’ve experienced a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

When a flood, storm, or burst pipe causes water to get into a home or structure water damage can occur most of the time. Sometimes the damage is apparent and evident. In other instances, it’s subtle or under-reported.

Remediation of water damage is more complex than just drying the interior. Modern water damage remediation tactics typically restorers such as Critical Control can mitigate damage which previously would have required total reconstruction of the structure, or in other words, demolish and rebuild.

Water Damage Restoration Guidelines Exist and you can call a Professional

A lot of times, property or home owners try to tackle water damage by using DIY solutions available on the internet. This is not advisable. Water damage can be controlled in accordance with established guidelines. These guidelines require the expertise and equipment of experts. The guidelines are laid out in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is required to ensure that there is a professional standardisation for situations involving water damage to houses or buildings, and the associated risks.

The IICRC guidelines assist restoration professionals like Critical Control to evaluate the kind and severity of the damage on each project.

There are really important reasons why water damage experts should follow these guidelines. In certain circumstances it is necessary to employ the use of an Indoor Environmental Professional (IEP) is required. An IEP is a person with the knowledge and experience to analyze an area for contamination, take samples, run lab tests and provide us with advice regarding the type of water damage.

This is particularly important in situations where the building’s residents are at risk or there is concern about contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are classified into categories and class, based on the extent of the invasion of water.

The water that enters the structure was classified based on its level of contamination. Category 1 means that the water is from a clean source such as a water source that burst, or a sink or tub.

Category 2 involves water that contains significant amounts of contaminants, and could be able to cause illness or discomfort should it be consumed or ingested. This could include water that is not obvious as a risk such as the effluent from washing machines or spills from toilets.

The water in the category 3 is classified as extremely polluted. It could be contaminated by toxic, pathogenic or any other harmful substances. This usually means contamination from toilet backflows following the toilet trap, seawater, water flooding from rivers and streams, or any other water flowing from the exterior of the building. The water could include heavy metals, pesticides or other toxic substances.


We can also use the IICRC’s classes to determine how much water has gotten into your property. The system is basically a set of guidelines for the level of saturation of the home or building.

The lowest amount of water absorption , and the most water is classified as Class 1. This is when the water comes in contact with around 5percent or less of construction materials that absorb water. This is due to the fact that most of the substances that are affected by water do not retain or absorb water. Examples include concrete, coated or finished wood, plaster or masonry.

Class 2 indicates that there is significant absorption of water and intrusion. This means that between 5% and 40% of the combined floor, ceiling and wall is constructed of low-evaporation materials like wood, concrete or bricks and mortar.

The porous materials like fiberboard, insulation and carpet which make up Class 3 comprise around 40 percent of the floor, wall and ceiling materials, including approximately 40% of the materials in Class 3. Other materials, such as cement or plaster that don’t absorb water haven’t been adversely affected.

Water has been absorbed into materials such as concrete as well as wood, plaster, and even wood, which are classified as Class 4. This is why special drying methods are required and longer drying times.

How to Dry a Water Damaged Building or Home Building Works


Physical extraction, dehumidification and evaporation are the three main methods to remove water from buildings. Removal of liquid water is at minimum 500 times more efficient than simply making do with dehumidifiers and air movers. The quicker the structure dries the more efficient. The extraction method and the dehumidification process will be affected by how much of the material is extracted.

Professionals dealing with water damage utilize a variety of extraction methods. We use a variety of equipment, such as subsurface extraction tools and self-propelled tools.

Forced Evaporation

The remaining moisture is then dried with high-velocity air movers after as much water as possible is taken away.

Submerged objects absorb water and moisture once it’s moistened. The substance is then damp or wet because of this.

Saturation is defined as the point at which it becomes impossible for air to hold any moisture. Higher humidity means that the air is getting closer to saturation.

The evaporation stage is the time the time when water molecules transition from the state of liquid to a gaseous state. This is called the process of evaporation.

This means that the object is no longer able to absorb water from the atmosphere. This is known as the saturation point. Once the saturation point is reached drying starts.

High-efficiency air movers dry objects in two areas in the evaporation phase. They create strong airflow which is directed by a filter system.

An air mover can transport between 10 and 20 percent more air than a fan, or a standard household fan.

The item is dried using air movers approximately 10 times faster than natural conditions in which there was no air movement.

Airflows that are high-velocity dry the surface and absorbs moisture pulled out by the air movement.

Utilizing Heat To Aid In the Drying Process

A key component in any water damage restoration is heating. To dry out materials damaged by water, we use a number of different types of heaters.

Electric Heaters: These heaters can be used for drying jobs that require multiple heating sources. It is possible to run several heaters at once because of their many wattages.

Electric heat can also be capable of being turned down or off while the job is in process, without impacting your other heaters. This means you can turn one heater down while increasing the wattage of the other to increase efficiency and reduce your cost of energy.

Because they emit virtually zero emissions and consume very little water, electric heaters are very well-liked for restoration projects. They are more difficult to heat up and require more time for drying.

Hydronic Bioler (TES): These boilers are extremely efficient at heating up quickly yet releasing low emissions. They typically operate on natural gas or propane.

Hydronic boilers differ from electric heating in that they do not utilize forced-air for distribution of heat. Therefore, it may be challenging to evenly heat a large area using these kinds of heaters. They are also able for dry work that does not require walls or ceilings to remain in the same place.

In the event that electric heaters can’t be used, hydronic boilers can frequently be employed. They can generate radiant heat and can keep your drying space warm without the requirement of an electrical source.


To dry houses and buildings that have been damaged by water damage, we employ low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of moisture from damp structures that have experienced extensive water damage within 24 hours.

The home dehumidifier can extract water from the air the same way as an LGR Refrigerant Dehumidifier. It can also get rid of up to 99 percent of the mold spores that are airborne through the elimination of condensation.

Fixing Hardwood Floor Water Damage

It is crucial to get rid of water damaged hardwood floors so that repairs can be completed by removing the subflooring.

The subflooring needs to be taken off and repaired before. Then the affected hardwood boards need to be sanded down or replaced. In order to ensure a uniform appearance, all floors should be sanded, then repaired after these repairs are completed.

Carpets are vulnerable to water damage

Floods can cause significant damages to your house and can make repairs costly and difficult to repair. Even if the water has been removed from the affected area immediately, there is the possibility that you’ll have to eventually replace the flooring.

It’s a huge shock to find out that your home is not in the best condition after you have spent lots of time and money to restore it.

In this regard, it is crucial to determine the severity of the damage as soon as possible. The first thing to do is to determine if the damaged area needs to be replaced. There’s a good possibility that the carpet could be maintained and cleaned after it has dried and the cleaning process will eliminate some of the concerns about mildew growth and the lingering smells.

Salvaging Carpet After a Water Damage Event

If the water damage is severe It is likely that you’ll notice marks on your carpet. In some cases, you may need to replace your flooring in order to get rid of these stains. An odor that is persistent and strong could also be a reason to replace your carpeting. It’s time to replace your carpet padding and padding in the event of this.

Then, consider if your floor can be professionally dried before you decide to replace it. A professional service will be able to help you determine how serious the damages were. We will be able to determine if your carpet should be replaced or can be salvaged. Remember that certain methods employed for drying may cause further damage to the carpet when it is already in bad condition.

The main factors that determine whether or not the carpet and padding should be replaced include:

Are your carpets professionally cleaned, dried, and disinfected?

If the padding under your carpet has been damaged, it could affect the length of time your carpet is clean. Even though your carpet is dried in a short time, mildew growth is still possible if the padding underneath is not dried.

Professional carpet cleaning service is the best way to ensure your carpet is dry and clean after an event of flooding. When the firm has finished their work, you will be able to make a more informed decision about the condition of your carpet and decide whether or not to replace it.

Drywall that has been damaged by water

The drywall repair procedure varies according to the extent of the damage. Water damage repair can be simple as taking out the drywall section, cleaning it, and then replacing it.

On the other side of the coin, severe damage could require a complete wall replacement, including walls studs and fiberglass insulation.

The drywall that is damaged by water usually harbors mold spores that can’t be easily removed. So in most cases the drywall needs to be replaced. We utilize moisture testing tools that help us determine where and how extensive the water has grown. This helps us identify areas that are damaged and limit costs to the only damaged ones.

Water can also cause structural damage, as it causes the material to expand or expand or contract. It is much easier to break wood if it has been moistened by water. The wood can be brittle if allowed to dry in water for too long.


This problem can be avoided by owners of buildings and homeowners making immediate changes to repair water-related structural problems with their property following flooding or other water damage.

Water Damage to the Foundation

Damage to a home’s foundation can be caused by a number of reasons. Although not all water issues result in structural damage, it’s critical to repair foundational problems promptly to prevent structural damage.

Foundation water damage can result in a myriad of problems depending on how it’s dealt with. It can lead to serious structural damage if it isn’t treated promptly.


Roof Water Damage

Like foundation water damage, roof water damage is also fairly common after natural catastrophes. Along with creating roof leaks damage can also cause problems with the walls or foundations of a construction.

Leaking roofs are costly and have serious disadvantages. The roof’s leaks could lead to mold growth and can be fatal. A roof that is leaky could harm the roof truss system and cause structural damage to the roof.

If you don’t address leaks in your ceiling immediately, they can cause your rafters to degrade and become soft. Electrical problems are also common in roof water damage, which could cause the possibility of an electrical fire. There are many reasons to have your roof water damage repaired quickly after a flood or any other unexpected damage.

HVAC Water Damage

Your home could be damaged structurally if your HVAC system fails or is defective equipment is installed. You are putting your business and home at risk because you do not have HVAC. Mold growth can lead to severe health issues.

Pipe Water Damage

If you’re suffering from pipe water damage, it is most likely coming from a ruptured pipe inside your home. If you’ve discovered an issue, it’s essential to contact a professional to stop the water from causing structural damage.

Burst pipes can cause a lot of damage. When your pipes break they can let water into your home, causing severe damages and necessitating water damage repair – a process that can cause structural damage.

As soon as you notice water damage to your pipe that is not repaired close off the water supply.

What’s the price to repair water damage?

Water damage restoration cost per square foot

Depending on the square foot the repairs and cleanup expenses can vary. National Flood Services has the below pricing breakdown per square foot.

Is water damage covered by homeowners’ insurance?

If the cause was unintentional and sudden the homeowners insurance policy generally cover it. The Insurance Information Institute states that homeowners insurance can provide for the repair or replacement of damaged windows however, it does not cover damage caused by negligence.

Damage from neglect could be defined as wear and tear of a surface or object because of exposure, lack of regular maintenance or general wear and tear. The Insurance Information Institute in the US states that homeowners insurance will NOT cover neglect-related damage.

A homeowners policy would not be able to cover damage to water caused by flooding. Rather, a flood policy would be necessary. In some regions, flood policies are required by mortgage lenders. Flooding may occur due to storms, ground that is saturated to the point of flooding or overflowing bodies of water like rivers, ponds, lakes oceans, streams together with high winds.