Water damage remediation – Nortonville

Homeowners in Nortonville get hit with flood damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

When a flood, storm or burst pipes cause water to seep into a home or building water damage is most of the time. Sometimes the damage is apparent and evident. Sometimes, the damage is more subtle or unreported.

The process of repairing water damage is more complex than simply drying the interior. With modern professional methods for water damage restoration, often restorers like Critical Control can mitigate damage which previously would have required a complete structural replacement, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are Available for your reference. Call an Professional

Many times, homeowners or builders attempt to repair water damage with DIY solutions that can be discovered on the internet. This is not a good idea. Water damage can be controlled in accordance with established guidelines. These guidelines call for the expertise and equipment of experts. These guidelines are detailed in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is created because of the necessity of professional standards in cases involving water destruction to buildings and homes and the risks they present.

Critical Control, a restoration company, can use the IICRC guidelines to help them evaluate the severity and nature of each project’s damage.

These guidelines are important for water damage professionals. There are certain situations that require the use of the services of an Indoor Environmental Professional (IEP). An IEP is someone who has the expertise and training to evaluate a site for contamination collect samples, perform lab tests and offer us suggestions on the type of water damage.

This is crucial in cases where the building’s residents are at risk or there is concern about contamination.

Categories and Classes of Water Damage


Projects for water damage restoration can be classified into two types in accordance with the degree of the water infiltration is.

The class refers to how contaminated the water that entered the structure was. Category 1 means that the water originates from a clean source, such as a burst water supply or even a sink or tub.

Category 2 water is characterized by significant levels of contaminants and can cause illness if it is inhaled or touched. This can include sources which are not usually considered to be an issue, like the discharge from washing machines or overflows from toilets.

Water in Category 3 can be considered to be extremely polluted. It may contain toxic, pathogenic or other harmful substances. This usually means contamination by toilet backflows following the trap for toilets or a flood of seawater from rivers and streams or any other source of water that comes from the building exterior. This water can include heavy metals, pesticides or harmful substances.


We can also use the IICRC’s classes to determine just how much water has gotten into your property. This is basically setting guidelines for the level of saturation of the home or building.

The lowest degree of water absorption , and the highest amount of water is classified as Class 1. This is when the water is in contact with about five percent or less building materials that absorb water. This is usually the case where most of the items affected by water are low in evaporation, which means that they aren’t able to absorb and retain water. Concrete and masonry, as well as plaster and wood that has been finished/coated are a few examples.

Class 2 indicates that there is significant infiltration of water as well as intrusion. It means that anywhere between 5 and 40% of the combined ceiling, floor and wall is constructed of low-evaporation materials like plaster, concrete, wood or masonry.

Class 3 is the term used to describe 40% or more of the flooring, walls, and ceiling surfaces are porous materials such as fiberboard, insulation, carpet, etc. Other materials, such as concrete and plaster that do not absorb water have not been affected in any way.

Water has been absorbed into materials such as concrete as well as wood, plaster, and even wood that are classified as Class 4. This will require more time to dry and special drying methods.

How do you dry a water damaged Building or House


Three methods for removing water from buildings include physical extraction, dehumidification and the process of evaporation. Eliminating water from liquids is typically 500 times more effective than using dehumidifiers or airmovers. The quicker the structure dries the more efficient. The quantity of material to be extracted can affect both extraction and dehumidification techniques.

Water damage experts utilize a variety of extraction techniques. We make use of a variety of tools , including subsurface extraction tools and self-propelled tools.

Forced Evaporation

After as much water has been removed, any remaining moisture is then dried by high-speed airmovers.

Submerged objects absorb water and moisture once it is moistened. The object becomes damp or wet as a result.

Saturation is defined as the point at which it becomes impractical for the air to contain any moisture. Higher humidity means that the air is closer to saturation.

In the evaporation phase in which water molecules are ejected from liquid state to gaseous state. This is referred to as the process of evaporation.

In other words it is no longer absorbs additional moisture from the atmosphere. This is referred to as the saturation point. When saturation is reached, drying starts.

High-efficiency air movers dry the object in two areas during the evaporation phase. They create a strong air flow over the entire surface which is directed by a filter that covers the entire area of the object.

A fan that moves air can transport between 10 and 20 percent more air than an ordinary fan, or a standard fan used in the home.

Air movers dry the object about 10 times more quickly than natural conditions, where there isn’t any air mover.

Airflows with high velocity leaves the surface dry and absorbs the moisture drawn out by the air movement.

Make use of heat to help in the drying process.

A key component of any restoration project is heat. We make use of a variety heaters to dry out materials that are damaged by water.

Electric Heaters They are ideal for drying jobs that require the use of various heating sources. You can run multiple heaters simultaneously due to their many power ratings.

Electric heat is also capable of being shut off or reduced while the job is in process, but without impacting other heaters. This means you can turn one heater down while increasing the wattage of another to maximize efficiency and lower expenses for energy.

Since they produce virtually no emissions and require very little water They are popular in restoration projects. The only downside is that they take longer time to warm up, which means that they require more time for the drying process generally.

Hydronic Bioler (TES) They are also extremely efficient at quickly heating up and generating very little emissions. They typically operate on natural gas or propane.

Hydronic boilers differ from electric heat as they don’t make use of forced-air heat to spread heat. This makes it difficult to distribute heat evenly over large areas using these heaters. They are also able to dry jobs that do not require walls or ceilings to be able to stand in their place.

If electric heaters are not employed, hydronic boilers may often be used. They can generate radiant heat and can keep your drying area warm without the requirement of electricity.


To dry buildings and houses that have been damaged by water damage, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of moisture from damp structures which have suffered severe water damage within 24 hours.

Apart from removing water from the air, as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also get rid of as much as 99% of airborne mold spores the air, by removing condensation.

Fixing Hardwood Floor Water Damage

The floors that have been damaged by water need to be removed so that repairs can occur from the subflooring upwards.

The subflooring must be removed and repaired first. Next, the hardwood boards affected need to be replaced or sanded. In order to ensure a uniform appearance the floors must be sanded, then restored after the repairs have been made.

Carpets are prone to water damage

Floods can cause serious damage to your home and can make repairs expensive and time-consuming. Even if the water has been removed from the affected region immediately, there’s still a chance that you’ll need to replace your flooring eventually.

After spending time and money restoring your home back to its original state, it could be devastating to find that the end result leaves some things to be desired.

It is crucial to determine the extent of damage as soon as you can. First thing to do is to determine if the damaged part requires replacement. It is possible to clean the carpet and use it again after drying. This can eliminate worries about mildew growth or lingering smells.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpet if the water damage was very severe. In some instances the only solution to eliminate these stains is to replace the flooring. A persistent, strong odor may also be the reason to change your carpet. If it is it is likely that you’ll require replacement of both your carpet and padding.

The next step to determine whether or not you need to replace your carpet is to assess whether the flooring is able to be professionally cleaned and dried. If you can have a reputable company perform the cleaning, then you will have a better idea of how serious the damage was. We can evaluate whether or not your carpet should be replaced or salvaged. If the carpet you have is in poor shape, some drying methods can cause further damage to it.

A variety of factors can determine the need for padding or carpet is a good idea to replace it.

Do your carpets get professionally cleaned, dried and disinfected?

The carpet’s ability to remain clean can be affected if the padding underneath it is damaged. Although your carpet might have dried quickly however the risk of mold growth is there if the padding underneath isn’t dried too.

Professional carpet cleaning company is the most effective way to ensure your carpet is dry and clean after the flood. When the firm has finished their work, you will be able to make a more informed decision about the condition of your carpet and determine whether or not you need to change it.

Drywall damaged by water

The degree of damage will determine the type and way to repair drywall. Repairing water damage may be as easy as taking out the drywall portion, cleaning the area, and then replacing it.

The flip side of the coin is that serious damage could need to be repaired completely, including walls studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to remove. So in most cases drywalls will have to be replaced. We employ moisture testing tools which allow us to identify where and how extensive the moisture has become. This allows us to identify the areas that are damaged and limit costs to only necessary damaged areas.

Water can also cause structural damage, as it causes the material to expand or shrink. When the wood is saturated by water, it becomes a lot easier to break. The wood can be brittle if kept in the water for too long.


In order to counteract this issue, it’s important to homeowners and property owners to fix structural damage from moisture-related problems with their properties immediately following an event like a flood or water damage occasion.

Water Damage to the Foundation

There are numerous reasons why water damage can cause to the foundation of a home. Although not all water problems cause structural damage, it’s important to address foundation issues as quickly as is possible in order to avoid any further structural damage.

The water damage from foundations can result in a myriad of problems depending on how it’s dealt with. If the problem isn’t treated quickly, it could result in serious structural damages.


Roof Water Damage

Similar to foundation water damage roof water damage is quite common following natural catastrophes. In addition to the possibility of roof leaks, roof damage can also result in issues with the walls and the foundation of a house or building.

Roof leaks are expensive and may have significant drawbacks. Roof leaks can lead to mold growth, which can prove fatal. The leaks in the roof could also result in damage to the roof truss system.

If you don’t take care to address leaks in your ceiling immediately they could cause your rafters to degrade and become soft. Damage to your roof can result from electrical faults which could lead to an electrical fire. All of these are good reasons to have roof water damage dealt with immediately following a flood, or other type of unexpected damage.

HVAC Water Damage

Your home may be damaged structurally if your HVAC system fails or is defective equipment is put in place. Your home and business at risk in the absence of HVAC. It can lead to serious health issues.

Water damage to pipes

If you’re suffering from pipe water damage, it is likely to be from a ruptured pipe inside your home. When you’ve identified an issue, it’s crucial to get a professional to stop the water from creating structural damage.

The burst of pipes can cause number of damages. When pipes are damaged they can let water into your home, causing extensive damage and requiring repairs for water damage – a process that can result in structural damage.

Shut off the water supply and then call an expert IICRC-certified specialist with a firm for water restoration like Critical Control as soon as you notice broken pipe water damage.

How much does it cost to fix water damage?

Water damage restoration cost per square foot

Water damage cleanup and repair cost will differ based on how many square feet you own. The following breakdown of pricing can be obtained from National Flood Services for each square foot

Is water damage covered by homeowner’s insurance?

If the cause of the damage was sudden and unintentional the homeowners insurance policy typically cover the damage. The Insurance Information Institute states that homeowners insurance can be used to pay for repairs or replacement of broken windows however, it does not cover damage caused by neglect.

Damage caused by neglect can be described as wear and tear on a surface or object because of exposure, lack of regular maintenance or general wear and tear. The Insurance Information Institute in the USA declares that homeowners insurance does not cover damage caused by neglect.

If the damage to your property results from an event that is a flood, it would not be covered by homeowner’s insurance. A flood policy would be required. Mortgage lenders might need flood insurance in specific areas. Flooding can happen because of storms, ground that is saturated to the point of overflowing or surging bodies of water like rivers, ponds, lakes oceans, streams in combination with high winds.