Water damage remediation – Oakmont

Property owners in Oakmont get hit with burst pipe damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

If a storm, flood, or burst pipe causes water to enter a house or building water damage is most of the time. Sometimes, the damage is obvious and obvious, but sometimes it is minor or hidden.

It is more complicated than just drying out the interior to repair water damage. Modern professional methods for water damage remediation, such as Critical Control, can often minimize damage that otherwise would require a complete structural replacement.

Water Damage Restoration Guidelines are available Contact for a Professional

Oftentimes, home or building owners try to tackle water damage by using DIY solutions available online. This isn’t a good idea. Water damage can be managed in accordance with the established guidelines. These guidelines call for the knowledge and skills of professionals. The guidelines can be included in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guideline is essential to ensure that there is a professional standardisation for scenarios involving water damage structures or homes, as well as the associated risks.

Critical Control, a restoration business, can use IICRC guidelines to assess the type and extent of the project’s damages.

These guidelines are essential for water damage professionals. There are instances that require us to bring in the services of an Indoor Environmental Professional (IEP). An IEP is professional with the knowledge and experience to evaluate a site for contamination take samples, perform lab tests, and then provide us with the type of water damage.

This is particularly important in situations where the occupants of the building could be high risk, there are a chance of adverse health effects, the people who live there have a desire to know the suspected contaminants or have another reason to raise concern over contamination.

Water damages caused through types and classes


Restoration of water damage projects are classified by category and class based on the extent of the invasion of water.

The category refers to how dirty the water entering the structure was. Category 1 water originates from a clean source like an unclean sink or tub, or a water source that bursts.

Category 2 water has high levels of contaminants and can cause illness when it is ingested or contacted. This could include water that is not obvious as a threat such as the effluent from washing machines or spills from toilets.

The water in the category 3 is classified as highly contaminated. It could contain toxic, pathogenic or other hazardous substances. This usually means contamination by toilet backflows following the toilet trap and seawater, flooding from streams and rivers, or any other water flowing from the building exterior. This water may be contaminated by pesticides, heavy metals or other toxic substances.


It is also possible to use the IICRC’s classes to determine just how much water has entered your property. This is basically setting guidelines for the level of saturation of the building or home.

The lowest amount of water absorption and the greatest amount of water is categorized as Class 1. This is where the water is in contact with about 5percent or less of construction materials which absorb water. This is because the majority of materials that are affected by water don’t hold or absorb water. Concrete and masonry, as well as plaster and finished/coated wood are just some of the examples.

Class 2 refers to absorption of water and intrusion. It’s about 5 to 40% of combined ceiling, floor and wall consist of low evaporation materials such as plaster, wood, concrete, or masonry.

The porous materials, like carpet, insulation , and fiberboard which make up Class 3 comprise around 40% of floor, wall and ceiling materials, with about 40% in class 3. Other materials like concrete and plaster that do not absorb water have not been adversely affected.

Water has been absorbed by substances like concrete, plaster, and wood, which are classified as Class 4. This means that it requires longer drying times and special drying methods.

How to Dry a Water damaged building or house


Physical extraction, dehumidification, and evaporation are three methods of removing water from buildings. Removal of liquid water is at least 500 times more effective than simply making do with dehumidifiers and air moving machines. The faster the structure can dry, the better. The quantity of materials to be extracted will influence both extraction and dehumidification techniques.

Professionals dealing with water damage employ a variety of extraction techniques. Some of our tools include subsurface tools, wands, self-propelled tools, and vacuum squeezers.

Forcible Evaporation

The remainder of the moisture gets then dried with high-velocity air movers after as much water as is taken away.

If an object is wet or submerged in water it absorbs some of the water or moisture. The object becomes damp or wet because of this.

The degree of saturation is known as the point where it is impossible to hold any additional moisture. A higher humidity indicates that the air is closer to saturation.

In the evaporation process in which water molecules are ejected from a liquid to a gaseous state. This process is known as evaporation.

This signifies that the object is no longer able to absorb moisture from the atmosphere. This is called the saturation point. Once saturation has been reached the drying process commences.

High-efficiency air movers dry the object on two sides during the evaporation process. They produce strong airflow that is controlled by a filter system.

An air mover moves around 10 to 20 times more air than an ordinary household fan.

Air movers dry the object around 10 times faster than the natural environment, in which there is no air movement.

Airflows with high velocity removes the moisture from the surface and absorbs the water that is drawn out by air movement.

Utilizing Heat To Aid In The Drying Process

Heating is a crucial element of any water damage restoration project. We employ a variety of heaters to dry the materials that are damaged by water.

Electric Heaters: These heaters may be used to dry jobs which require multiple sources of heat. They come in a variety of wattages, allowing you to use multiple heaters at the same time.

Electric heat can also be able to be shut off or reduced when the work is in process, but without impacting other heaters. This means you can reduce one heater while increasing the wattage of another to maximize efficiency, and decrease your energy costs.

Electric heaters are common in restoration jobs since they emit virtually zero emissions and consume minimal amounts of water. The only issue is they take longer to get hot, which requires more time to dry process generally.

Hydronic Bioler (TES) Hydronic Bioler (TES) These boilers heat up quickly and emit very little emissions. They can run on propane or natural gas.

Hydronic boilers are different from electric heat because they don’t use forced-air heat to disperse heat. This can make it difficult to evenly heat large areas with these heaters. They can also be used to dry jobs that do not require ceilings or walls to remain in their place.

They are also commonly used in situations where there is no power available to run electric heaters. They can generate radiant heat and keep your drying area warm without the need of an electric source.


To dry houses and buildings which have suffered damage due to flooding, we employ Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can extract 170 pints water from damp structures that have experienced severe water damage within 24 hours.

In addition to removing water from the air as a LGR Refrigerant Dehumidifier does this, the home dehumidifier can also get rid of up to 99percent of airborne mold spores the air through the elimination of condensation.

Repairing Wood Floor Water Damage

It is important to remove water damaged hardwood floors to allow repairs to be made starting from the subflooring.

The subflooring has to be taken off and repaired before. The affected hardwood floors must be sanded or replaced. Once these repairs are complete, the entire floor should be sanded, refinished and polished to ensure a uniform appearance.

Carpets are vulnerable to water damage

If you have been unfortunate enough to have a flood in your home it could be a stressful and costly experience. Even if water is removed from the affected area immediately, there is an opportunity that you’ll need to replace your flooring eventually.

After spending time and money restoring your home to its pre-flooding condition, it will be devastating to find that the end result leaves some things to be desired.

This is why it is crucial to determine the extent of damages as soon as you can. One of the first issues to address is whether or not the affected region should be replaced. There is a good possibility that the carpet could be maintained and cleaned after drying and the cleaning process will eliminate some of the worries about the growth of mildew and lingering odors.

Salvaging Carpet After a Water Damage Event

If the water damage is severe there is a chance that you’ll see noticeable staining on your carpet. There are times when you have to change your flooring to get rid of the stains. Another aspect that may prompt you to think of replacing your carpeting is the persistent and strong scent. It is necessary to change your carpet and padding when this happens.

The next step to determine whether or not you need to replace your carpet is to find out whether your floor can be dried and cleaned professionally. If you can have a reliable company do the cleaning, you’ll have a better understanding of just how bad the water damage was. Our firm will examine the carpet and decide whether it’s worth replacing or re-usable. Remember that some of the techniques used for drying can also harm the carpet further if it is already in poor condition.

The main factors that determine whether or whether the padding and carpet require replacement are:

Do your carpets get professionally cleaned, dried, and disinfected?

The carpet’s ability to remain clean can be affected if the padding beneath it is damaged. Although your carpet might be dry but the chance of mildew growth is still there if the padding underneath it has not dried as well.

The most secure way to make sure that your carpet is cleaned and disinfected following an event of flooding is to engage a professional carpet cleaning company. After the job is completed you’ll be able to make an informed decision on the state of your carpet. You can also decide whether you want to replace it.

Drywall that has been damaged by water

The degree of damage will determine the type and way to repair drywall. Repairing water damage can be as simple as removing a section of drywall cleaning it, after that, replacing it.

On the other side of the coin, significant damage might necessitate whole wall replacement, which includes the wall studs as well as fiberglass insulation.

Water damaged drywall often harbors mold spores which can not be easily removed. In most instances, drywall will need to be replaced. We employ moisture testing tools which allow us to identify how large and where the humidity has gotten. This allows us to pinpoint damaged areas and limit the cost to the only damaged ones.

Water can cause structural damage as well, because it causes the wood to expand or expand or contract. Once the wood is moistened with water, it’s much easier to break. The wood can get brittle if allowed to dry in water for too long.


To prevent this problem, it’s essential to homeowners and property owners to fix structural damage from water-related issues with their home immediately following an event like a flood or water damage incident.

Water Damage in the Foundation

Damage to a home’s foundation can happen due to a number of reasons. While not all water concerns result in structural damage, it is crucial to address foundational issues in the quickest time possible to prevent structural damage.

Water damage to the foundation can result in a myriad of problems based on how it’s dealt with. If the issue isn’t addressed quickly, it can result in serious structural damages.


Roof Water Damage

Like foundation water damage, roof water damage is also quite common following natural catastrophes. Roof damage could cause roof leaks, and can also cause damage to the foundation of a house or house.

Roof leaks can be very expensive and could have major negatives. The roof’s leaks could lead to mold growth, which can prove fatal. Leakage in the roof can also cause damage to the roof truss system.

Leaks from the ceiling could cause your rafters to decay and soften if you don’t address them immediately. Electrical problems are also common in roof water damage, which can cause an electrical fire. All of these are excellent reasons to have your roof water damage fixed quickly following a flood or other damage that is unexpected.

HVAC Water Damage

Your home may suffer structural damage if your HVAC system fails or faulty equipment is put in place. You are putting your business and home at risk because you do not have HVAC. The growth of mold can cause a variety of health issues that are very serious.

Water damage to pipes

If you’re experiencing pipe damage due to water, it is likely to be from a ruptured pipe inside your home. If you’ve discovered a leak, it is essential to contact an expert to prevent the water from causing structural damage.

A burst pipe can cause severe damage. Water can enter your home through damaged pipes, causing extensive damage. It could cause structural damage.

When you see broken pipe water damage, shut off the supply of water.

What is the cost of cleaning up water damage?

Water damage restoration cost per square foot

Repair and cleanup cost will differ based on how many square feet you own. National Flood Services has the following breakdown of pricing per square foot.

Does water damage get insured by the homeowner’s insurance?

Homeowners insurance policies are usually used if the damage is unexpected and accidental. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement for a broken window, but not when the damage is a result of negligence.

Damage from neglect may be described as wear and tear to an object or surface due to exposure, lack of preventative upkeep or general deterioration. According to the US-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

If the damage to your property is the result of a flood, the event would not be covered by a homeowners policy. A flood policy is required. Mortgage lenders might require flood insurance in some areas. Flooding can happen as a result of storms, over-saturated ground, and surging or overflowing bodies water like rivers, ponds, lakes, streams, oceans together with high winds.