Flood damage restoration service – Pheasant Run

Homeowners in Pheasant Run experience burst pipe damage regularly. Whether you’ve experienced a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

If a storm, flood, or burst pipe causes water to enter a house or structure water damage can occur more often than not. Sometimes, the damage is obvious and evident, while other times it is minor or hidden.

It’s more difficult than just drying the interior to fix water damage. Modern water damage remediation techniques like Critical Control, can often reduce damage that would normally need a total structural replacement.

Water Damage Restoration Guidelines Exist – So Call a Professional

Many times, homeowners or builders attempt to repair water damage using DIY solutions discovered online. This is a mistake. Water damage can be controlled by following the established guidelines. These guidelines require the knowledge and skills of experts. These guidelines are available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure the professional standardisation of situations involving water damage to buildings or homes, and the associated risks.

Critical Control, a restoration firm, is able to use IICRC guidelines to help them assess the type and extent of the damage each project has sustained.

There are really important reasons why water damage experts should follow these guidelines. In some situations there are situations where the use of an Indoor Environmental Professional (IEP) is necessary. An IEP is an individual who has the skills and training to evaluate a site for contamination collect samples, perform lab tests, then offer us suggestions on the nature of the water damage.

This is particularly important in cases where the building’s inhabitants could be high risk, there is a likelihood of adverse health effects, the people who live there are required to determine the suspected contaminants or have another reason for concern over contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are divided into two categories according to the extent of the infiltration of water is.

The water that entered the building was classified according to its level of contamination. The first category is water that comes from a clean source like a tub or sink or a water source that bursts.

The category 2 water has significant levels of contaminants and has the potential to cause discomfort of illness should it be consumed or ingested. These include sources that may not normally seem like dangers, such as the discharge from washing machines or toilet overflows.

Water in the category 3 is severely contaminated meaning that it can contain toxic, pathogenic or any other harmful agent within it. It can be caused by leaks from toilet traps, as well as floods of water from streams and rivers. This water may include heavy metals, pesticides or toxic substances.


It is also possible to use the IICRC’s classes to determine just how much water has penetrated your property. The system is basically a set of guidelines for the saturation of the building or home.

Class 1 means the least amount of water and absorption. This is when the water comes into contact about 5percent or less of construction materials that absorb water. This is because most substances affected by water don’t absorb or hold water. Concrete, plaster, masonry, and coated or finished wood are only a few examples.

Class 2 signifies that there is significant infiltration of water as well as intrusion. It means that anywhere between 5% and 40% of the combined ceiling, floor and wall is made of materials with low-evaporation, such as wood, concrete, plaster or masonry.

Class 3 is the term used to describe 40 percent or more of flooring, walls, and ceiling materials are porous materials such as fiberboard, insulation, carpet, etc. Other materials such as cement or plaster that don’t absorb water have not been affected in any way.

The water has been absorbed into materials such as concrete or plaster and wood that are classified as Class 4. This will require more time to dry and special drying techniques.

How to Dry a Water Damaged Home or Building Works


Three methods for removing water from buildings include physical extraction, dehumidification, and evaporation. Removal of liquid water is at least 500 times more effective than just putting up with dehumidifiers and air mover. The quicker the structure can dry more efficiently. The extraction method and the dehumidification process will be affected by how much stuff is being extracted.

Water damage experts employ various extraction methods. We make use of a variety of equipment, such as self-propelled and subsurface extraction tools.

Forced Evaporation

The remaining moisture is then dried by high-speed airmovers after the maximum amount of water has been removed.

If an object is wet or submerged in water it absorbs some water or moisture. The result is that the object becomes damp or wet.

The degree of saturation is referred to as the point at which it becomes impossible to contain the moisture. More humid means that the air is getting closer to saturation.

In the evaporation stage the water molecules leap from liquid state to gaseous state. The process is referred to as evaporation.

In another way it is no longer absorbs additional moisture from the air. This is known as the saturation point. When saturation is attained, the drying process begins.

In the evaporation stage high-efficiency air movers dry the object from two sides. They generate strong airflow that is directed by a filter system.

Air mover is able to move around 10 to 20% more air than a fan, or even a regular household fan.

The item is dried using air movers approximately 10 times faster than in natural conditions where no air mover was employed.

The high-speed airflow dry the surface and draws in the moisture that has been drawn away by the air mover.

Use heat to assist the drying process

The element of heat is crucial to the success of any water damage restoration task. We make use of a variety heaters to dry the materials that are damaged by water.

Electric Heaters: These heaters may be used to dry tasks which require multiple sources of heat. They come in a variety of power levels, which allows you to operate multiple heaters at once.

Electric heat can also be able to be reduced or turned off during the process, without impacting your other heaters. This means that you can lower one heater, while increasing the power of another one to improve efficiency and reduce your expenses for energy.

Electric heaters are a common feature in restoration jobs since they emit virtually zero emissions and consume only a small amount of water. However, the only drawback is they take longer to heat up, requiring longer drying time. process in general.

Hydronic Bioler (TES) They are also extremely efficient at quickly heating up, while still producing very little emissions. They can run on natural gas or propane.

Hydronic boilers differ from electric heat in the sense that they don’t make use of forced air to distribute heat, which means it could be challenging to evenly heat an area with these types of heaters. They also operate at a lower temperature, making ideal for drying projects that require walls and ceilings to be left in place.

If electric heaters are not used, hydronic boilers can typically be utilized. Because they are so efficient in producing radiant heat they are able to easily keep your drying space warm, even without an electrical power source.


To keep buildings and homes dry that have been damaged by flooding, we use Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints of water from damp structures which have suffered severe water damage within 24 hours.

The home dehumidifier can extract water from the air in the same way it does an LGR Refrigerant Dehumidifier. It can also remove up to 99 percent of the airborne mold spores through the elimination of condensation.

Fixing Wood Floor Water Damage

It is crucial to get rid of flooring that has been damaged by water so that repairs can be done starting from the subflooring.

The subflooring must be removed and repaired prior to. Then the affected hardwood boards need to be sanded down or replaced. After these repairs are completed then the entire floor must be sanded and then refinished to ensure uniformity.

Carpets Damaged by Water

Floods can cause significant destruction to your home and cause it to be expensive and time-consuming. Even if water is removed from the affected area right away, there’s the possibility that you’ll need to replace the flooring in the future.

It’s a huge shock to discover that your home is not in the best state after having spent lots of time and money to restore it.

It is crucial to determine the extent of damage as soon as possible. The first thing to do is determine if the affected area requires replacement. There’s a chance that the carpet can be maintained and cleaned after drying and the cleaning process can help to eliminate concerns regarding the growth of mildew and lingering odors.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting , especially if the water damage was very severe. In certain instances, the only way to remove these stains is to replace the flooring. A strong, lingering odor could also be a reason to change your carpet. It is necessary to change your carpet and padding in the event of this.

Then, consider if your flooring can be dried professionally before deciding whether you want to repair it or replace it. A professional company will be able to help you determine how serious the damage was. Our firm will examine your carpet and determine whether it is best to replace it or salvageable. Remember that some of the techniques employed for drying may cause further damage to the carpet if it is already in poor condition.

The main factors that determine whether or not the carpet and padding require replacement are:

Are your carpets dry, cleaned and disinfected professionally?

The carpet’s ability to stay fresh can be compromised if the padding underneath it is damaged. Although your carpet has been dried quickly, mildew growth can still occur when the padding beneath is not dried.

The best way to be sure that your carpet is restored and disinfected after flooding is to employ a professional carpet cleaning company. Once the work is done then you’ll have the ability to make an informed decision about the condition of your carpet. It is also possible to decide whether you want to replace it.

Water Damaged Drywall

The degree of damage will determine the nature and technique of repair. Water damage repair can be as simple as removing the drywall section, cleaning it, and then replacing it.

On the other hand of the coin serious damage might necessitate whole reconstruction of the wall, which could include walls studs and fiberglass insulation.

The drywall that is damaged by water usually harbors mold spores that cannot be removed easily. So in most cases, drywall will need to be replaced. We use moisture testing tools to measure the amount of moisture. This allows us to pinpoint damaged areas and limit the cost to those areas that are only damaged.

Water can also cause structural damage, because it causes the wood to expand or expand or contract. When the wood is saturated by water, it becomes a lot easier to break. The wood can be brittle if kept in the water for too long.


To prevent this problem, it’s essential to homeowners and property owners to fix structural damage from moisture-related problems with their property immediately after an event like a flood or water damage incident.

Foundation Water Damage

The damage caused by water to a house’s foundation can happen due to various reasons. Although not all water issues result in structural damage, it is crucial to address foundational issues in the quickest time possible to prevent structural damage.

Foundation water damage can cause various issues in the manner it is dealt with. If the issue isn’t treated quickly, it could result in structural damage that is severe.


Roof Water Damage

As with foundation water damage roof water damage is quite common following natural disasters. Roof damage could cause roof leaks, and can also cause damage to the foundation of a building or the foundation of a home.

Roof leaks are expensive and have serious disadvantages. A leak in the roof can cause mold and mildew to develop, which could be deadly. Leakage in the roof can also cause damage to the roof truss system.

If you don’t take care to address leaks in your ceiling immediately the risk is that your rafters to degrade and become soft. Electrical faults are also prevalent when it comes to roof water damage that can lead to an electrical fire. All of these are excellent reasons to get roof water damage fixed quickly following a flood , or any other damage that is unexpected.

HVAC Water Damage

Your home can be damaged by structural damage if the HVAC system fails or faulty equipment is installed. If you do not have HVAC, you are opening the interior of your business or home to all sorts of issues. Mold growth can occur and result in a range of serious health issues.

Water damage to pipes

If you’re experiencing pipe damage due to water, it is likely to be from a ruptured pipe inside your home. If you’ve determined there is a leak, it’s important to seek out professional assistance to stop the leak and ensure it doesn’t cause structural damage.

Burst pipes can cause a number of damages. When pipes are damaged they can let water into your home, causing extensive damages and necessitating water damage repair – which can cause structural damage.

Turn off the water supply and then call a skilled IICRC-certified expert at a water restoration firm like Critical Control as soon as you spot broken pipes or water damage.

What is the cost to repair the damage caused by water?

Water damage restoration cost per square foot

Cleaning and repair cost will differ based on how many square feet you have. The following pricing breakdown is available at National Flood Services for each square foot

Will Water Damage Be Covered by the homeowner’s insurance policy?

The homeowner’s insurance policies are generally appropriate if the damage is sudden and not intentional. According to the Insurance Information Institute, homeowners insurance can cover repairs or replacement of a damaged window, but not if the damage was the result of neglect.

Damage caused by neglect can be described as wear and tear on a surface or object because of exposure, lack of preventative upkeep or general deterioration. The Insurance Information Institute in the US states that homeowners insurance will not cover damage caused by neglect.

A homeowner’s policy does not be able to cover damage to water caused by flooding. A flood policy is required. Mortgage lenders might require flood insurance in some regions. Flooding may occur because of storms, over-saturated ground, overflowing or surging bodies of water like rivers, ponds, lakes oceans, streams in combination with high winds.