Water damage remediation – Pierce

Homeowners in Pierce get hit with water damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

If a storm, flood, or burst pipe causes water to enter a house or structure water damage can occur more often than not. Sometimes, the damage is obvious and obvious. Other times, it’s subtle or under-reported.

The process of repairing water damage is more complex than simply drying the interior. Modern professional methods for water damage remediation, such as Critical Control, can often reduce damage that would normally need a total structural replacement.

Water Damage Restoration Guidelines are readily available Contact an Professional

Many times, homeowners and builders try to fix water damage using DIY solutions that can be located online. This is a mistake. Water damage can be managed according to the established guidelines. These guidelines call for the skills and tools of experts. These guidelines are found in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide exists because of the need for professional standards in cases involving water damage to buildings and homes and the risks they present.

The IICRC guidelines assist restoration experts like Critical Control to evaluate the kind and severity of the damages on every project.

There are many reasons why professionals dealing with water damage should follow these guidelines. There are certain situations that require us to bring in an Indoor Environmental Professional (IEP). An IEP is a professional who has the training to assess a site for contamination, collect samples, get laboratory tests, and help us determine the kind of water damage.

This is particularly important in cases where the building’s residents are at risk or are concerned regarding contamination.

Categories and Classes of Water Damage


Water damage restoration projects are classified according to category and class depending mostly on the extent of the flooding of water.

The class refers to how contaminated the water that enters the structure is. The first category is water that originates from a clean source like a tub or sink or burst water supply.

Category 2 water contains the highest levels of contaminants. It can cause illness if it is consumed or in contact with. These include sources that may not normally seem like dangers, such as the discharge from washing machines or overflows from toilets.

Water in Category 3 can be considered to be extremely polluted. It could contain toxic, pathogenic, or any other hazardous substances. Usually this means contamination from toilet backflows following the toilet trap, seawater, water flooding from rivers and streams or any other source of water that comes from the exterior of the building. This category of water can contain heavy metals, pesticides and regulated substances as well as toxic chemicals in it.


It is also possible to use the IICRC’s classes to determine how much water has entered your property. The system is basically a set of guidelines for the saturation of the building or home.

Class 1 refers to the lowest amount of water and absorption. It is the case when water comes into contact with less than 5% of the building materials that absorb water. This is typically the case that the majority of the building items affected by water are low evaporation. This means they aren’t able to absorb and hold in water. Concrete, plaster, masonry, and wood that has been finished/coated are a few examples.

Class 2 signifies that there is substantial absorption of water and intrusion. This means that between 5 and 40% of the ceiling, floor, and wall are made of low-evaporation materials like wood, concrete or bricks and mortar.

Class 3 refers to the fact that around 40% or more of the flooring, walls, and ceiling surfaces are porous materials such as fiberboard, insulation, carpet etc. Other materials, such as cement or plaster that don’t absorb water haven’t been affected in any way.

The water has been absorbed into substances like concrete or plaster and wood, which are classified as Class 4. This is why special drying methods are required and longer drying time.

How to Dry a Water Damaged home or Building Works


Three ways to remove water from buildings are physical extraction, dehumidification, and evaporate. Eliminating water from liquids is typically 500 times more effective than using dehumidifiers or air movers. The quicker the structure can dry the more effective. Both extraction and dehumidification methods will be affected by how much stuff is being extracted.

Professionals dealing with water damage employ a variety of extraction methods. Our tools include subsurface tools, wands, self-propelled tools, and vacuum squeegees.

Forced Evaporation

The remainder of the moisture gets dried using high-speed air movers once as much water as is taken away.

If an object is wet or submerged in water, it absorbs some of the water or moisture. The object is then damp or wet due to this.

Saturation is the time at which it becomes impossible for the air to contain any moisture. More humid means that the air is more close to saturation.

The evaporation process occurs the time when water molecules transition from an in liquid state to a gaseous one. This is called evaporation.

This signifies that the object no longer absorbs moisture from the air. This is referred to as the saturation point. When saturation is attained the drying process commences.

In the evaporation stage high-efficiency air movers dry the object from two sides. They produce strong airflow that is controlled by a filtering system.

A fan that moves air can move 10 to 20 times more air than an ordinary fan.

The object is dried using airmovers about 10 times faster than the natural environment where there was no air movement.

Airflows with high velocity dry the surface and absorbs the moisture pulled out by the airflow.

Make use of heat to help in the drying process

The element of heat is crucial to the success of any restoration task. To dry out materials which have been affected by water, we employ various types of heaters.

Electric Heaters They are ideal for drying tasks that require several different heat sources. They come in a variety of energies, which lets you run multiple heaters simultaneously.

Electric heat can also be able to be reduced or turned off during the process, without affecting your other heaters. To increase efficiency and reduce your expenses for energy you can alter the wattage of a heater and increase its power.

Electric heaters are very common in restoration work because they produce essentially no emissions and use very little water. They are more difficult to heat up and take longer drying time.

Hydronic Bioler (TES) These boilers are extremely efficient at quickly heating up, while still producing minimal emissions. They typically operate with propane or natural gas.

Hydronic boilers differ from electric heat in that they don’t use forced-air to distribute heat, which means it could be difficult to evenly heat a large space with these kinds of heaters. They also run at less temperature, which makes them ideal for drying jobs that require ceilings and walls to remain in place.

In the event that electric heaters can’t be used, hydronic boilers can often be used. Because they’re so effective in producing radiant heat, they can easily keep your drying space warm even without an electrical power source.


We utilize Low Grain Refrigerant Dehumidifiers (LGR) to dry buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can remove 170 pints of water from damp structures that have experienced severe water damage within 24 hours.

In addition to removing water out of the air, as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also eliminate up to 99% of airborne mold spores the air by eliminating condensation.

Repairing Wood Floor Water Damage

It is important to remove the hardwood floors that have been damaged by water so that repairs can be completed starting from the subflooring.

The subflooring has to be removed and repaired first. Then the affected hardwood boards must be sanded or replaced. To ensure a uniform appearance flooring, all floors should be sanded down and repaired after these repairs are completed.

Carpets Damaged by Water

If you have been unfortunate enough to have a flood in your home, it can be a stressful and costly experience. Even if water is eliminated from the region immediately, there’s an opportunity that you’ll need to eventually replace the flooring.

It’s devastating to discover that your house isn’t in the best condition after spending lots of time and money to restore it.

In this regard, it is crucial to determine the extent of the damage as soon as possible. One of the initial issues to address is whether the affected area should be replaced. There’s a chance that the carpet can be maintained and cleaned after it has dried, and this cleaning will eliminate some of the concerns about mildew growth and lingering odors.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting , especially if the water damage was very severe. In some cases, you may need to replace your flooring to remove the stains. An odor that is persistent and strong may also be the reason to replace your carpeting. It is necessary to change your carpet and padding in the event of this.

Next, determine if your floor can be dried professionally before you decide whether to change it. A professional company will aid you in determining the severity of the damage was. Our company will assess your carpet and determine whether it is best to replace it or salvageable. If the carpet you have is in poor shape, some drying methods can cause further damage to it.

Some of the considerations that will determine whether or not the carpet and padding should be replaced include:

Do your carpets need to be dried, cleaned and disinfected professionally?

The carpet’s ability to remain clean is affected when the padding beneath it has been damaged. Although your carpet might have dried quickly, the possibility of mildew growth is still present if the padding under isn’t dried out as well.

Professional carpet cleaning company is the most effective way to make sure your carpeting is dry and clean following a flood. Once the cleaning is complete then you’ll have the ability to make an informed decision on the state of your carpeting. You’ll also be able to determine whether you want to replace it.

Drywall that has been damaged by water

The extent of damage will determine the type and way to repair drywall. Water damage repair can be as simple as removing an area of drywall, cleaning it, and then replacing it.

On the other hand of the coin, significant damages could necessitate a total reconstruction of the wall, which could include the wall studs as well as fiberglass insulation.

There are spores of mold in damaged drywall, which is hard to get rid of. In the majority of cases the drywall needs to be replaced. We employ moisture testing instruments to measure the amount of moisture. This allows us to isolate damaged areas and keep costs restricted to only necessary damaged areas.

Water can also cause structural damage, as it causes the material to expand or shrink. When the wood is saturated with water, it’s much easier to break. The wood can become brittle if it is allowed to dry in water for too long.


To prevent this problem, it’s essential for homeowners and building owners to fix structural damage from water-related issues with their property immediately after the water or flood occasion.

Water Damage to the Foundation

Damage to a home’s foundation can happen due to a number of reasons. While not every water issue can lead to structural damage, it’s crucial to correct foundational problems as quickly as you can in order to avoid any further structural damage.

The water damage from foundations can lead to many different issues based on the way it’s dealt with. If the issue isn’t treated promptly, it could cause serious structural damage.


Roof Water Damage

Roof water damage can also be caused by natural disasters, just like foundation water damage. Roof damage could cause roof leaks and also damage the foundations of a structure or home.

Leaking roofs are costly and may have significant drawbacks. A leak on the roof could result in mold and mildew to develop, which could be deadly. A leaking roof may also harm the roof truss system, which can cause structural damage to the roof.

Leaks in the ceiling can cause your rafters’ to degrade and soften if you do not deal with them right away. Electrical faults are also common when it comes to roof water damage which could cause an electrical fire. There are many reasons to have your roof water damage repaired promptly following a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system starts to fail or brand new equipment is found to be defective, it could result in structural damage to your house. You are putting your home and business at risk by not having HVAC. It can lead to severe health issues.

Pipe water damage

If you’re suffering from pipe water damage, it is most likely coming from a ruptured pipe inside your home. If you’ve determined there has been an issue, it is important to seek out professional assistance to stop the water and ensure that it doesn’t lead to structural damage.

A burst pipe can cause devastating damage. If your pipes fail and water enters your home, causing extensive damages and necessitating repairs for water damage – which can result in structural damage.

Turn off the water supply and call an expert IICRC-certified specialist at a water restoration firm such as Critical Control as soon as you spot broken pipe water damage.

What is the price of cleaning up water damage?

Water damage restoration cost per square foot

Based on the square foot the water damage repair and cleanup costs vary. The following pricing breakdown can be obtained at National Flood Services for each square foot

Are water damages covered by homeowner’s insurance?

Insurance policies for homeowners are typically appropriate if the damage is unexpected and unintentional. According to the Insurance Information Institute, homeowners insurance may cover repair or replacement for a damaged window, but not when the damage occurs as a result of neglect.

Neglect is defined as damage to a surface or an object that results from the weather, lack of maintenance or general deterioration. According to the US-based Insurance Information Institute, homeowners insurance does not cover damage due to neglect.

A homeowners policy would not be able to cover damage to water due to flooding. The flood insurance policy is mandatory. In some regions the flood policies are demanded by mortgage companies. Flooding can occur because of storms, ground that is saturated to the point of flooding or overflowing bodies of water like rivers, ponds, lakes rivers, oceans, and streams together with high winds.