Water damage restoration service – Professorville

Building owners in Professorville suffer flood damage on a regular basis. Whether you’ve experienced a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

The most common cause of water damage is when water enters a building or house by way of a flood, storm or burst pipe. Sometimes the damage is apparent and obvious. In other instances, it’s subtle or under-reported.

The process of repairing water damage is more complex than simply drying the interior. Modern methods for water damage restoration Restoration companies like Critical Control can mitigate damage that previously would have required complete structural replacement, in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are readily available Contact a Professional

Many times, homeowners or builders attempt to repair water damage using DIY methods that can be discovered online. This is a mistake. There are guidelines to deal with water damage , and they call on the skills and tools of experts. These guidelines can be available in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is created because of the necessity of professional standardisation in situations involving water damage to buildings and homes and the risks they pose.

The IICRC guidelines assist restoration experts such as Critical Control to evaluate the severity and type of damage on each project.

There are many reasons that water damage professionals must follow these guidelines. In certain circumstances it is necessary to employ an Indoor Environmental Professional (IEP) is essential. An IEP is someone who has the expertise and experience to analyze an area for contamination collect samples, perform lab tests, then give us advice on the kind of water damage that is likely to occur.

This is crucial in cases where the building’s occupants are at high risk or are concerned regarding contamination.

Categories and Classes of Water Damage


Restoration projects for water damage are divided into two categories, depending on how extensive the infiltration of water is.

The water that entered the building was classified based on its level of contamination. Category 1 is water that comes from a clean source like the sink or tub, or a burst water supply.

Category 2 water is characterized by the highest levels of contaminants. It can cause illness if it is consumed or in contact with. These include sources that might not appear to be dangers, such as the discharges from washing machines, or overflows from toilets.

The water in the category 3 is classified as highly contaminated. It could contain toxic, pathogenic or any other dangerous substances. It can be caused by sewage backflows, leaks from toilet traps, as well as water flooding from streams and rivers. This water may be contaminated by pesticides, heavy metals or harmful substances.


We can also use the IICRC’s classes to determine how much water has penetrated your property. This system basically sets guidelines for the saturation of the home or building.

Class 1 is the smallest amount of absorption and the amount of water. This is when the water comes into contact about five percent or less construction materials which absorb water. This is because most substances affected by water don’t retain or absorb water. Concrete, finished/coated wood, plaster , or masonry.

Class 2 refers to water absorption and intrusion. This means that between 5 to 40% of the combined ceiling, floor, and wall are made of low-evaporation materials like wood, concrete, or the masonry.

The porous materials, such as carpet, insulation , and fiberboard that comprise Class 3 are approximately 40% of floor, wall and ceiling materials, with approximately 40% of the materials in Class 3. Other materials, such as concrete or plaster that don’t absorb water have not been adversely affected.

The water has been absorbed into substances like concrete as well as wood, plaster, and even wood that are classified as Class 4. This calls for special drying techniques and longer drying times.

How to Dry a Water damaged Building or House


Three ways of removing water from buildings are physical extraction, dehumidification and the process of evaporation. The removal of liquid water is at minimum 500 times more efficient than simply putting up with dehumidifiers and air mover. The quicker the structure can dry, the better. The quantity of material to be extracted will influence the extraction process as well as dehumidification methods.

Water damage experts employ a variety of extraction methods. Our tools include tools for subsurface extraction, wands as well as self-propelled tools and vacuum squeezers.

Forcible Evaporation

After as much water has been removed, any moisture remaining is then dried by high-speed airmovers.

A submerged object absorbs water and moisture when it is moistened. The result is that the material gets dampened or wet.

Saturation is the time at which it becomes impractical for the air to contain any moisture. Higher humidity means that the air is getting closer to saturation.

In the evaporation process, water molecules jump from a liquid state to a gaseous state. This is referred to as the process of evaporation.

In other words, the object does not absorb any more moisture from the air. We call that saturation point the point at which evaporation begins. Once saturation is reached, drying starts.

In the process of evaporation the highly efficient air moves dry the object on two sides. They generate a large airflow over the entire surface that is controlled through a filter system that covers the entire area of the object.

An air mover can move between 10 and 20 percent more air than an ordinary fan, or a standard fan used in the home.

The item is dried using air movers approximately 10 times faster that in natural conditions in which no air mover was employed.

A high-velocity airflow dries the surface of the object and draws in the moisture that has been taken out by the air mover.

Use heat to assist the drying process.

One of the most essential elements for any water damage restoration is heat. We use a variety of heaters to dry out materials that are damaged by water.

Electric Heaters These heaters are perfect to dry jobs which require the use of several different heating sources. This is because they are available in several different power levels, which allows you to use multiple heaters at the same time.

You can also reduce or off electric heat when the task is done, without affecting other heaters. To maximize efficiency and lower your energy bills, you can adjust the wattage of one heater, while also increasing its capacity.

Electric heaters are common in restoration work since they generate virtually no emissions and require minimal amounts of water. However, the only drawback is that they take longer time to heat up, requiring more time for the drying process overall.

Hydronic Bioler (TES),: These boilers heat up quickly and release very little CO2. They can be run on natural gas or propane.

Hydronic boilers differ from electric heating in that they do not use forced-air to distribute heat. Therefore, it may be challenging to evenly heat an area using these kinds of heaters. They are also able to dry out jobs that do not require ceilings or walls to be able to stand in the same place.

Hydronic boilers are often employed when there isn’t enough power available to run electric heaters. Because they are so efficient in producing radiant heat they are able to keep your drying area warm even when there is no electrical power source.


We employ Low Grain Refrigerant Dehumidifiers (LGR) to help dry out buildings and houses that have suffered water damage.

The LGR Home Dehumidifier can draw 170 pints of water from damp structures that have experienced severe water damage within 24 hours.

Apart from removing water out of the air, as a LGR Refrigerant Dehumidifier does it, the dehumidifier for your home will also eliminate as much as 99% of mold spores that are airborne in the air by eliminating condensation.

Repairing Hardwood Floor Water Damage

It is essential to take away the hardwood floors that have been damaged by water so that repairs can be made starting from the subflooring.

The subflooring must be removed and repaired first. Then the affected hardwood boards need to be sanded down or replaced. Once these repairs are complete and the floor is finished, it should be sanded and refinished to ensure uniformity.

Water Damage to Carpeting

If you’ve experienced a flood in your home it could be a stressful and expensive experience. You might need to change your flooring, even if you have taken the water out of the area as quickly as is possible.

It’s devastating to discover that your home is not in the best condition after spending lots of time and money to repair it.

It is vital to identify the extent of the damage as fast as you can. The first thing to do is to determine if the damaged area requires replacement. There’s a chance that the carpet will be maintained and cleaned once it is dry, and this cleaning can help to eliminate concerns regarding the growth of mildew and persistent odors.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpet if the damage to your carpet was severe. Sometimes, you will have to replace your flooring in order to remove these stains. Another reason that might prompt you to think about replacing your carpeting is a persistent and strong odor. It’s time to replace your padding and carpet when this happens.

The next step to determine whether or not it is necessary to replace your carpet is to determine if the floor can be dried and cleaned professionally. If you’ve got an established company that can handle the cleaning, then you will have a better idea of just how bad the water damage was. Our company will assess the carpet and decide if it should be replaced or salvageable. Keep in mind that some of the techniques employed for drying may further damage the carpet if it is already in poor condition.

A few of the factors which will decide whether or not the carpet and padding should be replaced include:

Can your carpets be dried, cleaned and disinfected professionally?

If the padding under your carpet is damaged, this can affect the length of time your carpet can last. Although your carpet has been dried in a short time, mildew growth is still possible when the padding beneath isn’t dried.

A professional carpet cleaning company is the best option to ensure that your carpet is dry and clean after the flood. Once the company has completed their work, you will be in a position to make an informed decision regarding the condition of your carpet and decide whether or not to replace it.

Drywall Damaged by Water

The severity of the damage will determine the type and method of drywall repair. Repairing water damage could be as simple as removing the drywall portion and then cleaning the affected area and replacing it.

On the other side of the coin, significant damages could necessitate a total wall replacement, including wall studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to remove. In most cases the drywall needs to be replaced. We utilize moisture testing tools to measure the amount of moisture. This helps us identify the areas that are damaged and limit the costs to only necessary damaged areas.

Water can also cause structural damage, since it causes the wood to expand or contract. It is easier to break wood if it is moistened by water. The wood may get brittle if kept in the water for too long.


In order to counteract this problem, it’s crucial to homeowners and property owners to take care of structural damage caused by the effects of moisture on their properties immediately following an event like a flood or water damage incident.

Foundation Water Damage

Water damage to a house’s foundation can happen due to various reasons. While not all water issues cause structural damage, it’s important to correct foundational issues as quickly as is possible in order to avoid any future structural damage.

The damage caused by water in the foundation could cause many different problems dependent on the way it is dealt with. If the problem isn’t taken care of promptly, it could result in structural damage that is severe.


Roof Water Damage

Similar to foundation water damage roof water damage is very common after natural disasters. In addition to the possibility of roof leaks, roof damage can also cause problems with the walls or foundations of a construction.

Leaking roofs can be extremely costly and can have significant negatives. A leak on the roof can cause mildew and mold to develop, which could be deadly. The leaks in the roof could also cause damage to the roof truss system.

If you don’t address the leaks in your ceiling promptly, they can cause your rafters decay and soften. Electrical problems are also common when it comes to roof water damage which could cause the possibility of an electrical fire. These are all good reasons to have your roof water damage fixed quickly after a flood or any other sudden damage.

HVAC Water Damage

If your HVAC system starts to fail or brand-new equipment is found to be faulty, this can definitely cause structural damage to your house. If you do not have HVAC you’re exposing the inside of your house or business to all kinds of problems. It can lead to severe health issues.

Damage to the Pipe Water

Pipe water damage is usually caused due to a pipe burst within your home. If you’ve determined there’s been a leak, it’s important for you to contact a professional to stop the leak and ensure it doesn’t cause structural damage.

A burst pipe can cause severe damage. Water can enter your home through damaged pipes, causing extensive damage. It could cause structural damage.

Turn off the water supply, and then contact an experienced IICRC-certified professional at a water restoration firm like Critical Control as soon as you spot broken pipe water damage.

What is the cost to restore the damage caused by water?

Water damage restoration cost per square foot

Water damage cleanup and repair costs can vary based on how much square footage you own. The following breakdown of pricing is available from National Flood Services for each square foot

Can Water Damage be covered By the Homeowner’s Insurance?

If the cause of the damage was accidental and sudden homeowners insurance policies typically cover the damage. The Insurance Information Institute states that homeowners insurance can provide for the repair or replacement of windows that have been damaged, but not for damage caused by negligence.

Damage from neglect could be defined as wear and tear of an object or surface because of exposure, insufficient preventative maintenance, or general degradation. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance doesn’t cover damage from neglect.

A homeowners policy would not be able to cover damage to water caused by flooding. A flood policy would be required. In some regions, flood policies are required by mortgage companies. Flooding can happen due to floods, storms or overflowing bodies of water, or overflowing or surging bodies like streams, rivers, lakes and oceans.