Flood damage restoration service – Reed

Homeowners in Reed experience flood damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a building flood, Critical Control is standing by to respond 24/7.

If a storm, flood or burst pipes cause water to get into a home or structure water damage can occur most of the time. Sometimes the damage is visible and evident, while other times it’s subtle or even hidden.

It’s more complex than just drying out the interior to fix water damage. With the most modern methods for water damage restoration typically restorers such as Critical Control can mitigate damage that previously would have required complete structural replacement, in terms of demolition and rebuild.

Water Damage Restoration Guidelines Are In Place so call a Professional

Many times, building or home owners attempt to deal with water damage using DIY solutions that can be found on the internet. This is not a good idea. The management of water damage is according to established guidelines. These guidelines call for the knowledge and skills of professionals. These guidelines are detailed in the IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide is necessary to ensure professional standardisation of scenarios involving water damage structures or homes, as well as the risks associated with it.

The IICRC guidelines assist restoration experts such as Critical Control to evaluate the severity and type of damages on every project.

There are many reasons that water damage professionals need to follow these guidelines. In certain situations, the use of an Indoor Environmental Professional (IEP) is necessary. An IEP is a person who has the skills and knowledge to assess a site for contamination and take samples, conduct lab tests and give us advice on the type of water damage.

This is especially important in cases where the building’s inhabitants could be at risk, is a likelihood of adverse health effects, the people who live there express a need to identify the suspected contaminants or have another reason to raise concerns about contamination.

Water destruction caused through categorizes and classes


Restoration projects for water damage can be classified into two types, depending on how extensive the water infiltration is.

The class is based on how polluted the water entering the structure has been. The first category is water that comes from a clean source such as the sink or tub, or a burst water supply.

Category 2 water contains high levels of contaminants and could cause illness if it is consumed or in contact with. These include sources that might not appear to be dangers, such as the discharge from washing machines or overflows from toilets.

Water in Category 3 can be considered highly contaminated. It could contain pathogenic, toxic, or any other hazardous substances. Most often, this is due to contamination by toilet backflows following the trap for toilets, seawater, water flooding from rivers and streams or any other water arising from the building exterior. This kind of water could have pesticides, heavy metals and regulated substances as well as toxic substances in it.


The IICRC has also developed classes that we follow in determining the level of water intrusion into your property. The system basically serves as a guideline for how saturated a building or home is.

The lowest degree of water absorption , and the highest amount of water is classified as Class 1. It is the case the case when water comes in contact with less than 5% of the building substances that absorb water. This is due to the fact that most of the materials that are affected by water do not retain or absorb water. Concrete or plaster, masonry and coated or finished wood are only several examples.

Class 2 is a term used to describe water absorption and intrusion. It is approximately 5% to 40% of the combined floor, wall and ceiling consist of low evaporation materials such as plaster, concrete, wood, or the masonry.

Class 3 means that about 40 percent or more of wall, floor, and ceiling surfaces are porous materials such as fiberboard, insulation, carpet and so on. Other materials, such as cement or plaster that don’t absorb water haven’t been adversely affected.

The water has been absorbed into materials like concrete or plaster and wood that are classified as Class 4. This requires special drying techniques and longer drying times.

How to Dry a Water damaged Building or House


Three ways of removing water from buildings are physical extraction, dehumidification and evaporation. The elimination of water that is liquid is at minimum 500 times more efficient than just having to put up with dehumidifiers or air mover. The quicker the structure can dry, the better. The extraction method and the dehumidification process are affected by how much material is being removed.

Water damage experts use a variety methods. Our tools include subsurface tools, wands Self-propelled tools, self-propelled instruments, and vacuum squeegees.

Forced Evaporation

The remainder of the moisture gets then dried using high-speed air movers once the maximum amount of water is taken away.

When an object gets wet or submerged in water it absorbs some of the moisture or water. The object is then damp or wet because of this.

Saturation is the time where it becomes unachievable for the air to contain any moisture. The greater the humidity, the closer the air is to being saturated.

The evaporation process occurs when water molecules change from an in liquid state to a gaseous state. This is referred to as evaporation.

In other words the object no longer absorbs additional moisture from the air. This is referred to as the saturation point. As soon as saturation is reached, the drying process begins.

In the evaporation stage the highly efficient air movers dry the object from two sides. They produce strong airflow that is controlled by a filtering system.

An air mover moves around 10-20 times more air than an ordinary fan.

The item is dried using airmovers around 10 times faster than in natural conditions where no air mover was used.

The high-speed airflow dry the surface of the object and sucks up the moisture that has been pulled out by the air movement.

Utilizing Heat To Aid In The Drying Process

The element of heat is crucial to the success of any water damage restoration project. In order to dry out any materials that have been affected by water, we use various types of heaters.

Electric Heaters These heaters are perfect for drying jobs which require the use of various heat sources. This is due to the fact that they are available in several different wattages, allowing you to run multiple heaters simultaneously.

Electric heat can also be capable of being shut off or reduced when the work is in process, but without impacting other heaters. To maximize efficiency and lower your energy bills it is possible to adjust the power of one heater, while also increasing its wattage.

Because they emit virtually no emissions and require very little water They are used in restoration projects. The only downside is that they take longer time to warm up, which means that they require more time to dry process generally.

Hydronic Bioler (TES) They are also extremely efficient at quickly heating up, while still producing minimal emissions. They can be run on natural gas or propane.

Hydronic boilers are different from electric heating in that they do not utilize forced-air for distribution of heat, which means it could be difficult to evenly heat an space with these kinds of heaters. They also run at a lower temperature, making ideal for drying projects that require ceilings and walls to remain in place.

They are also commonly used in situations where there is no electrical power to power electric heaters. They can produce radiant heat and can keep your drying area warm without the need of an electric source.


We utilize low Grain Refrigerant Dehumidifiers (LGR) to dry buildings and homes that have experienced water damage.

The LGR Home Dehumidifier can extract 170 pints moisture from damp structures that have suffered extensive water damage within 24 hours.

The dehumidifier at home is able to remove water from the air in the same manner it does an LGR Refrigerant Dehumidifier. It will also eliminate the 99 percent or more of the airborne mold spores by eliminating condensation.

Fixing Wood Floor Water Damage

It is important to remove water damaged hardwood floors to ensure that repairs can be done by removing the subflooring.

First, damaged subflooring needs to be removed and repaired. The affected hardwood floors must be sanded or replaced. When the repairs are finished then the entire floor must be sanded, refinished and polished to ensure a uniform appearance.

Carpets are prone to water damage

If you have been unfortunate enough to have a flood in your home this can be a stressful and costly experience. You may need to replace your flooring even if you’ve eliminated the water from the area as soon as possible.

It’s a huge shock to discover that your home isn’t in the best state after having spent so much time and money to repair it.

This is why it is crucial to determine the extent of damages as soon as you can. First thing to do is determine if the affected area needs to be replaced. There is a way to wash the carpet and use it after drying. This can alleviate any concerns about mildew growth or lingering scents.

Salvaging Carpet After a Water Damage Event

You may notice stains on your carpeting if the damage to your carpet was extensive. Sometimes, you will have to replace your flooring to remove the stains. A strong, lingering odor can also be an indication to change your carpet. You will need to change your carpet and padding in the event of this.

Next, determine if your flooring can be dried professionally before deciding whether you want to repair it or replace it. A professional company can assist you in determining how severe the damage was. We will be able to assess whether your carpet needs to be replaced or can be saved. If your carpet is damaged, a few drying methods could further harm it.

A few of the factors which will decide whether or not the carpet and padding should be replaced include:

Are your carpets professionally cleaned, dried, and cleaned?

If the padding underneath your carpet has been damaged, it can impact the time that your carpet can last. Although your carpet might have dried quickly, the possibility of mildew growth is still there if the padding underneath isn’t dried too.

A professional carpet cleaning service is the most effective way to make sure your carpeting is clean and dry after an event of flooding. Once the company has completed their task, you’ll be able to make a more informed decision regarding the condition of your carpet and determine whether or not you need to replace it.

Drywall that has been damaged by water

The process for repairing drywall varies based on the extent of the damage. Repairing water damage could be as simple as removing a portion of drywall and then cleaning the affected area and then putting it back.

On the other hand of the coin significant damage could require a complete wall replacement, which includes the wall studs as well as fiberglass insulation.

Drywall that has been damaged by water often contains mold spores that can’t be easily removed. In the majority of cases the drywall will need to be replaced. We employ moisture testing tools which allow us to identify where and how extensive the moisture has become. This helps us identify areas that are damaged and limit costs to the only damaged ones.

Water can also cause structural damage, since it causes the wood to expand or contract. It is much easier to break wood when it is moistened by water. If the water is left to sit for a prolonged time, there could be a significant amount of rot within the wood that can make it break easily.


This problem can be avoided by owners of buildings and homeowners making immediate changes to repair the structural damage caused by moisture-related issues that affect their property after an event like a flood or damages caused by water.

Water Damage to the Foundation

There are many reasons water damage can cause to the foundation of a house. Although not all water problems could cause structural damage, it’s important to correct foundational issues as soon as possible to prevent future structural damage.

Foundation water damage can cause various issues dependent on the way it is addressed. It could cause serious structural damage if it isn’t taken care of promptly.


Roof Water Damage

As with foundation water damage roof water damage is also very common after natural catastrophes. In addition to causing roof leaks, roof damage can cause issues with the walls and the foundation of a house or building.

Roof leaks are expensive and may have significant drawbacks. A leak in the roof may cause mildew and mold to develop, which could be fatal. A roof that is leaky could affect the roof truss structure that can lead to structural damage to the roof.

Leaks in the ceiling can cause your rafters to decay and soften if you do not address them immediately. Electrical faults are also common when it comes to roof water damage that can lead to the possibility of an electrical fire. These are all good reasons to get roof water damage taken care of promptly following a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system begins to fail or brand-new equipment is found to be inoperable, it can result in structural damage to your house. Your business and your home at risk in the absence of HVAC. Mold growth can lead to serious health problems.

Pipe Water Damage

Water damage to pipes is typically caused by a burst pipe within your home. When you’ve identified an issue, it’s crucial to get an expert to stop the water from damaging the structure.

A ruptured pipe can result in devastating damage. The water could enter your home through damaged pipes, causing extensive damage. This could lead to structural damage.

Turn off the water supply and then call an expert IICRC-certified specialist with a firm for water restoration such as Critical Control as soon as you spot broken pipes or water damage.

What’s the cost for restoring water damages?

Water damage restoration cost per square foot

Depending on the square foot the water damage repair and cleanup costs differ. National Flood Services has the following breakdown of pricing for each square foot:

Are water damages covered by homeowner’s insurance?

If the cause was unintentional and sudden the homeowners insurance policy generally cover it. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement of a broken window, however, not if the damage occurs as a result of neglect.

Damage from neglect could be defined as wear and tear of an object or surface due to exposure, insufficient regular maintenance or general wear and tear. The Insurance Information Institute in the US states that homeowners insurance does not cover damage caused by neglect.

A homeowner’s policy does not be able to cover damage to water caused by flooding. Flood insurance is mandatory. Mortgage lenders might require flood policies in certain regions. Flooding can be caused by storms, flooding ground, overflowing bodies of water or the overflowing or surge of bodies such as streams, lakes, rivers and oceans.