Flood damage restoration service – Southwest Annex

Homeowners in Southwest Annex experience water damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a fire suppression activation, Critical Control is standing by to respond 24/7.

Water damage is more common when water seeps into a building or residence via a flood, storm or burst pipes. Sometimes the damage is evident and apparent. In other instances, it’s hidden or not reported.

The process of repairing water damage is more complex than just drying out the interior. Modern techniques for water damage repair, such as Critical Control, can often mitigate damage that would otherwise need a total structural replacement.

Water Damage Restoration Guidelines Exist so call a Professional

Many times, homeowners and builders attempt to repair water damage using DIY methods that can be discovered on the internet. This is a mistake. There are guidelines for dealing water damage that call on the skills and tools of professionals. The guidelines are laid out in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guide exists because of the necessity of professional standardisation of situations that involve water damage to homes and buildings and the risks they present.

Critical Control, a restoration business, can use IICRC guidelines to assess the type and extent of the project’s damages.

These guidelines are crucial for professionals dealing with water damage. In certain circumstances, the use of an Indoor Environmental Professional (IEP) is required. An IEP is someone with the knowledge and training to evaluate the condition of a place and take samples, conduct lab tests, and then offer us suggestions on the kind of water damage that is likely to occur.

This is particularly important in cases where the building’s inhabitants could be at risk, is a possibility of negative health effects, the people who live there have a desire to know the contaminants that are suspected or have another reason to raise concerns about contamination.

Categories and classes of Water Damage


Restoration projects for water damage can be classified into two types, depending on how extensive the infiltration of water is.

The water that entered the structure was classified based on its contamination. Category 1 water comes from a clean source such as a tub or sink or a burst water supply.

Category 2 is water that has high levels of contaminants and has the potential to cause discomfort of illness if contacted or consumed. These sources can be waters that are not readily apparent as a danger such as the effluent from washing machines and spills from toilets.

The water in the category 3 is classified as highly contaminated. It could be contaminated by pathogenic, toxic, or any other harmful substances. This could be due to sewage backflows, leaks in toilet traps, and the flooding of streams and rivers. The water in this category could contain heavy metals, pesticides, regulated materials or toxic substances in it.


You can also utilize the IICRC’s classes to determine just how much water has penetrated your property. The system is basically a set of guidelines for the level of saturation of the building or home.

Class 1 is the smallest amount of water and absorption. This is when the water comes into contact around 5percent or less of building materials which absorb water. This is due to the fact that most of the substances that are affected by water do not hold or absorb water. Concrete, plaster, masonry, and finished/coated wood are just some of the examples.

Class 2 signifies that there is a significant absorption of water and intrusion. It means that anywhere between 5 to 40% of the floor, ceiling and wall is made of low-evaporation materials like plaster, concrete, wood or masonry.

The porous materials, like carpet, insulation , and fiberboard which make up the class 3 make up around 40% of floor, wall and ceiling materials, including around 40% in class 3. and also where other materials that do not absorb much water such as plaster or concrete have not been negatively affected.

Class 4 means that water is stuck in materials that do not readily absorb water, such as wood, plaster, concrete and the masonry. This requires special drying techniques and longer drying time.

How to Dry a Water Damaged home or Building Works


Physical extraction, dehumidification, and evaporation are the three main ways to get rid of water from a structure. The removal of liquid water is at minimum 500 times more efficient than just putting up with dehumidifiers and air movers. The quicker the structure dries the more efficient. Both methods of extraction and dehumidification will be affected by how much of the material is extracted.

Water damage professionals employ a variety of extraction methods. Some of our tools include wands, subsurface extraction tools, self-propelled tools, and vacuum squeegees.

Forced Evaporation

The remaining moisture is dried by high-speed airmovers after the maximum amount of water has been taken away.

If an object is wet or submerged in water, it absorbs some of the moisture or water. The material is then damp or wet due to this.

The level of saturation is known as the point where it becomes impossible to contain any additional moisture. The greater the humidity, the more close the air is getting to saturation.

In the evaporation phase the water molecules leap from liquid state to gaseous state. The process is called evaporation.

In other words, the object will no longer absorb additional moisture from the atmosphere. This is referred to as the saturation point. Once saturation is reached, drying will begin.

In the evaporation phase the highly efficient air mover dry the object from two sides. They create a strong airflow across the surface of the object, which is directed by a filter that is able to cover the entire surface of the object.

A fan that moves air can move 10-20 times more air than an ordinary household fan.

Air movers dry objects approximately 10 times more quickly than natural conditions, where no air mover is used.

A high-velocity airflow dries the surface and absorbs the moisture pulled out by the air movers.

Utilize heat to aid in the drying process.

One of the most essential elements for any water damage restoration project is the use of heat. We make use of a variety heaters to dry the materials that have been damaged by water.

Electric Heaters: These heaters may be used to dry jobs which require multiple sources of heat. You can run multiple heaters simultaneously because of their numerous Wattages.

Electric heat can also be adjustable, allowing it to be shut off or reduced when the work is in process, without affecting your other heaters. To maximize efficiency and lower your expenses for energy, you can adjust the wattage of a heater while increasing it’s power.

Electric heaters are a common feature in restoration projects since they generate virtually zero emissions and consume very little water. They require longer to warm up and need more time for drying.

Hydronic Bioler (TES): These boilers are extremely efficient at quickly heating up and generating minimal emissions. They can be powered by natural gas or propane.

Hydronic boilers are different from electric heating in that they do not use forced-air to distribute heat. Therefore, it may be challenging to evenly heat a large area using these kinds of heaters. They also run at less temperature, which makes them ideal for drying jobs that require walls and ceilings to be left unattended.

When electric heaters cannot be employed, hydronic boilers may often be used. They can generate radiant heat and can keep your drying area warm without the need for an electric source.


To dry buildings and houses that are damaged due to water damage, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can extract 170 pints water from damp structures that have suffered massive water damage in just 24 hours.

Apart from removing water from the air as a LGR Refrigerant Dehumidifier does, the home dehumidifier will also eliminate up to 99% of mold spores that are airborne in the air, by removing condensation.

Fixing Wood Floor Water Damage

It is crucial to get rid of flooring that has been damaged by water to allow repairs to be completed by removing the subflooring.

Subflooring that is damaged first has to be removed and repaired. Next, the hardwood boards damaged must be sanded or replaced. Once these repairs are complete and the floor is finished, it should be sanded and refinished to guarantee a uniform appearance.

Carpets Damaged by Water

If you have been unfortunate enough to have flooding in your house this can be a costly and stressful experience. Even if the water is removed from the affected area immediately, there is an opportunity that you will have to eventually replace the flooring.

It’s devastating to discover that your home isn’t in the best condition after spending lots of time and money to restore it.

Because of this, it is crucial to determine the extent of damage as quickly as is possible. The first thing to do is to determine if the damaged part requires replacement. There is a way to wash the carpet, then use it again after drying. This can eliminate worries about mildew growth or persistent smells.

Salvaging Carpet After a Water Damage Event

There may be stains on your carpeting if the water damage was very serious. In certain instances, the only way to eliminate these stains is to replace the flooring. An odor that is persistent and strong can also be an indication to get your carpet replaced. It’s time to replace your padding and carpet if this happens.

The next step to determine whether or not you’ll need to replace your carpeting is to determine whether your floor is able to be professionally cleaned and dried. If you have a reliable company do the cleaning, then you’ll have a better idea of how severe the water damage was. Our firm will examine your carpet and determine if it should be replaced or salvageable. Be aware that some of the techniques employed to dry the carpet can cause further damage to the carpet if it is already in poor condition.

A few of the factors that determine whether or whether the padding and carpet need to be replaced are:

Are your carpets dry and cleaned, or disinfected and cleaned professionally?

The carpet’s capacity to remain clean can be affected if the padding beneath it is damaged. Although your carpet might have dried quickly however the risk of mildew development is present if the padding under it is not dried out as well.

A professional carpet cleaning company is the best way to make sure your carpeting is dry and clean following the flood. When the firm has finished their job, you’ll be able to make a more informed decision regarding the condition of your carpeting and decide whether or not to replace it.

Drywall that has been damaged by water

The degree of damage determines the kind and technique of repair. Repairing water damage is as simple as removing an area of drywall cleaning it, after that, replacing it.

On the other side of the coin, severe damages could necessitate a total reconstruction of the wall, which could include wall studs and fiberglass insulation.

Mold spores can be found in damaged drywall, which is difficult to remove. In the majority of cases the drywall needs to be replaced. We utilize moisture testing tools which allow us to identify where and how extensive the humidity has gotten. This allows us to identify damaged areas and limit costs to the only damaged ones.

The water can also cause structural damage because it causes the material to expand and expand and contract. After the wood has been moistened by water, it becomes much more difficult to break. If the water is left to sit for a long period of time, it could cause an extensive amount of rot within the wood, which could make it break easily.


In order to counteract this issue, it’s important for building owners and homeowners to take care of structural damage caused by moisture-related problems with their properties immediately following a flood or water damage occasion.

Foundation Water Damage

The damage caused by water to a house’s foundation can be caused by a number of reasons. While not every water issue cause structural damage, it’s important to fix foundational problems as quickly as you can to prevent further structural damage.

Foundation water damage can cause many different problems dependent on the way it is handled. If the problem isn’t addressed quickly, it could result in structural damage that is severe.


Roof Water Damage

Damage to the roof can result from natural disasters, just like foundation water damage. As well as causing roof leaks, roof damage can cause problems with the walls and foundation of a home or construction.

Leaking roofs are extremely costly and can have significant drawbacks. Leaks in the roof can cause mold and mildew to develop, which could cause death. A roof that is leaky could harm the roof truss system that can lead to structural damage to the roof.

Leaks in your ceiling could cause your rafters to decay and soften if you do not address them immediately. Damage to your roof can result from electrical issues which could lead to the possibility of an electric fire. These are all good reasons to have your roof water damage repaired quickly following a flood , or any other damage that is unexpected.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system fails or is defective equipment is installed. If you do not have HVAC you’re opening the interior of your home or business to all sorts of issues. The growth of mold can cause serious health problems.

Pipe water damage

Water damage to pipes is typically caused by a burst pipe within your home. If you’ve determined there’s been leak, it’s crucial to seek out professional assistance to stop the water and make sure it doesn’t cause structural damage.

A ruptured pipe can result in serious damage. The water could enter your home through damaged pipes, which can cause severe damage. This can lead to structural damage.

Stop the water supply and call a skilled IICRC-certified expert from a company for water restoration such as Critical Control as soon as you detect broken pipe water damage.

What’s the cost for the restoration of water damage?

Water damage restoration cost per square foot

Based on the square feet, water damage repairs and cleanup expenses vary. National Flood Services has the following pricing breakdown per square foot.

Are water damage covered By Homeowner’s Insurance?

Insurance policies for homeowners are typically appropriate if the damage is unexpected and not intentional. The Insurance Information Institute states that homeowners insurance can cover the repair or replacement of windows that have been damaged but not for damages due to negligence.

Damage from neglect could be described as wear and tear of an object or surface because of exposure, lack of preventative upkeep or general deterioration. The Insurance Information Institute in the US states that homeowners insurance will NOT cover neglect-related damage.

A homeowners policy would not be able to cover damage to water caused by flooding. Rather, a flood policy would be mandatory. In some areas, flood policies are required by mortgage companies. Flooding can happen due to storms, over-saturated ground, flooding or overflowing bodies of water, such as lakes, rivers, ponds rivers, oceans, and streams in combination with high winds.