Flood damage restoration service – Springhill

Building owners in Springhill get hit with flood damage on a regular basis. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a water line breakage, Critical Control is standing by to respond 24/7.

If a storm, flood or burst pipes cause water to enter a house or structure water damage is more often than not. Sometimes, the damage is obvious and apparent. Sometimes, the damage is hidden or not reported.

It is more complicated than just drying the interior to repair water damage. Modern professional methods for water damage remediation such as Critical Control, can often mitigate damage that would otherwise have required total structural replacement.

Water Damage Restoration Guidelines Exist and you can call an Professional

Many times, homeowners or builders attempt to repair water damage with DIY methods that can be located on the internet. This is a bad idea. The management of water damage is according to established guidelines. These guidelines demand the expertise and equipment of experts. These guidelines can be included in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is necessary to ensure that there is a professional standardisation for instances involving water damage to buildings or homes, and the risks associated with it.

The IICRC guidelines aid restoration experts like Critical Control to evaluate the category and class of damage on each project.

These guidelines are important for water damage professionals. In certain situations there are situations where an Indoor Environmental Professional (IEP) is essential. An IEP is an expert who has the experience and knowledge to examine the health of a building, collect samples, get lab tests, and then help us determine the kind of water damage.

This is especially important in cases where the building’s inhabitants could be high risk, there is a possibility of negative health effects, the occupants are required to determine the suspected contaminants or have another reason for concerns about contamination.

Categories and classes of Water Damage


Restoration projects for water damage are classified according to category and class, based on the severity of the flooding of water.

The water entering the structure was classified based on the degree of contamination. Category 1 implies that the water comes from a clean source such as burst water supply, or even a sink or tub.

Category 2 is water that has high levels of contaminants, and could be able to cause discomfort or illness if contacted or consumed. These sources can be waters that are not readily apparent as a threat, such as the discharge from washing machines and spills from toilets.

Water in Category 3 can be considered to be highly contaminated. It could be contaminated by toxic, pathogenic or other dangerous substances. Usually this means contamination from sewage, toilet backflows after the toilet trap and seawater, flooding from rivers and streams, or any other water arising from the exterior of the building. This water can be contaminated by pesticides, heavy metals or harmful substances.


We can also use the IICRC’s classes to determine how much water has penetrated your property. This is basically an indication of how saturated a building or home is.

The lowest amount of absorption by water and the most water is classified as Class 1. This is when water is in contact with less than 5% building substances that absorb water. This is due to the fact that most of the substances that are affected by water won’t retain or absorb water. Concrete, finished/coated wood, plaster or masonry.

Class 2 means that there is a significant infiltration of water as well as intrusion. It’s about 5% up to 40% of the total ceiling, floor, and wall comprised of low-evaporation materials like plaster, concrete, wood, or the masonry.

Class 3 refers to the fact that around 40 percent or more of wall, floor, and ceiling surfaces are porous materials such as fiberboard, insulation, carpet, etc. and where other materials that do not absorb water like plaster or concrete have not been negatively affected.

Water has been absorbed into materials like concrete or plaster and wood that are classified as Class 4. This requires more drying time and special drying methods.

How to Dry a Water Damaged Home or Building Works


Three methods for removing water from buildings are physical extraction, dehumidification, and evaporate. Eliminating liquid water is at most 500 times more efficient than using dehumidifiers or air movers. The quicker the structure is dried more efficiently. The quantity of material to be extracted will influence both extraction and dehumidification techniques.

Professionals dealing with water damage employ a variety of extraction methods. We make use of a variety of tools including subsurface extraction tools as well as self-propelled tools.

Forcible Evaporation

After as much water is removed, any remaining moisture is dried using high-velocity airmovers.

If an object is wet or submerged in water it absorbs some water or moisture. The substance gets wet or damp because of this.

The level of saturation is referred to as the point at which it is impossible to hold any more moisture. The greater the humidity, the more close the air is to being saturated.

The evaporation process occurs the time when water molecules transition from the state of liquid to a gaseous one. This is referred to as evaporation.

In another way, the object will no longer absorb additional moisture from the atmosphere. This is known as the saturation point. When saturation has been reached the drying process starts.

In the evaporation stage high-efficiency air mover dry the object from two sides. They create strong airflow which is controlled by a filter system.

An air mover can transport between 10 and 20 percent more air than a fan, or an ordinary household fan.

Airmovers dry the object approximately 10 times faster than in natural conditions, where there isn’t any air mover.

A high-velocity airflow dries the surface and absorbs the water that was pulled away by the air movement.

Utilize heat to aid in the drying process

A key component in any water damage restoration is the use of heat. We employ a variety of heaters to dry materials that have been damaged by water.

Electric Heaters: These heaters can be used for drying jobs that require multiple heat sources. They are available in several different wattages, allowing you to use multiple heaters at the same time.

Electric heat is also capable of being turned down or off when the work is in process, but without impacting other heaters. This means that you could lower one heater, while raising the wattage of the other to increase efficiency, and decrease your energy costs.

Electric heaters are very common in restoration jobs since they emit virtually no emissions and require minimal amounts of water. However, the only drawback is they take longer to heat up, requiring longer drying time. process generally.

Hydronic Bioler (TES) Hydronic Bioler (TES) These boilers heat up quickly and release very little CO2. They can be run on propane or natural gas.

Hydronic boilers are different from electric heat in that they do not make use of forced air to distribute heat. Therefore, it may be difficult to evenly heat a large area using these kinds of heaters. They are also able for dry work that does not require walls or ceilings to remain in the same place.

In the event that electric heaters can’t be employed, hydronic boilers may frequently be employed. Because they are extremely efficient in producing radiant heat, they are able to easily keep your drying space warm even when there is no electric power source.


To keep buildings and homes dry which have suffered damage due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints water from an un-dry structure which has been badly affected by water damage every 24 hours.

The dehumidifier in your home can remove water from the air the same way it does an LGR Refrigerant Dehumidifier. It can remove the 99 percent or more of the airborne mold spores through the elimination of condensation.

Fixing Wood Floor Water Damage

The floors that have been damaged by water need to be cut up to ensure repairs can take place beginning with the subflooring and moving upwards.

The subflooring must be taken off and repaired before. Next, the hardwood boards damaged need to be replaced or sanded. In order to ensure a uniform appearance, all floors should be sanded and restored after the repairs have been made.

Water Damage To Carpeting

Floods can cause severe damage to your home and can make repairs difficult and expensive. Even if water is eliminated from the region immediately, there’s the possibility that you will have to replace your flooring eventually.

After spending time and money to restore your home to pre-flooding condition, it will be depressing to discover that the end result leaves an unsatisfactory impression.

Because of this, it is essential to evaluate the severity of the damage as soon as possible. One of the first issues that needs to be addressed is whether or not the damaged area should be replaced. It is possible to wash the carpet, then use it once dry. This can eliminate worries about the growth of mildew or persistent odors.

Salvaging Carpet After a Water Damage Event

If the water damage has been very severe, it is possible that you’ll see noticeable staining on your carpet. There are times when you have to change your flooring to eliminate the stain. A strong, lingering odor may also be the reason to get your carpet replaced. If this is the case it is likely that you’ll require replacement of both your padding and carpet.

The next step to determine whether or not it is necessary to replace your carpet is to find out if the floor is able to be cleaned and dried professionally. If you’ve got a reliable company do the cleaning, then you’ll have a better understanding of how serious the damage was. Our company will assess your carpet and determine whether it’s worth replacing or repairable. Be aware that some methods employed to dry the carpet can further damage the carpet if it is already in poor condition.

Several factors will influence the need for padding or carpet need to be replaced.

Are your carpets professionally dried, cleaned, and disinfected?

The carpet’s ability to remain clean can be affected if the padding beneath it has been damaged. Even though your carpet is dried fast, the growth of mildew can still occur in the padding beneath if it is not dried.

Professional carpet cleaning company is the best option to make sure your carpeting is clean and dry after the flood. Once the cleaning is complete then you’ll have the ability to make an informed decision about the condition of your carpet. You’ll also be able to determine whether to replace it.

Drywall damaged by water

The process for repairing drywall varies depending on the severity of the damage. Repairing water damage can be as simple as removing the drywall section, cleaning it, and after that, replacing it.

The other side is that significant damage may need to be repaired completely, including walls studs and fiberglass insulation.

There are spores of mold in water damaged drywall that is difficult to eliminate. So in most cases the drywall needs to be replaced. We utilize moisture testing tools to determine the amount of moisture. This allows us to pinpoint areas that are damaged and limit costs to only the areas that are damaged.

The water can also cause structural damage, as it causes the material to expand and expand and contract. When the wood is saturated by water, it becomes much more difficult to break. If the water sits for a prolonged time, there can be an extensive amount of rot within the wood that can make it break easily.


To prevent this problem, it’s crucial to homeowners and property owners to fix structural damage from water-related issues with their home immediately following the water or flood event.

Water Damage in the Foundation

There are numerous reasons why water damage can affect the foundation of a home. While not every water issue cause structural damage, it’s crucial to fix foundational issues as quickly as is possible to prevent further structural damage.

The damage caused by water in the foundation could cause various issues dependent on the way it is addressed. It could cause serious structural damage if the issue isn’t addressed quickly.


Roof Water Damage

Roof water damage can also be caused by natural disasters similar to foundation water damage. Roof damage can cause roof leaks as well as damage the foundations of a structure or the foundation of a home.

Leaking roofs can be extremely costly and might have significant disadvantages. A leak in the roof could cause mildew and mold to grow, which can be deadly. A leaky roof can cause damage to the roof truss system, which can cause structural damage to the roof.

Leaks in your ceiling could cause your rafters’ to degrade and soften if you don’t take action immediately. Roof water damage can also be caused by electrical faults which could lead to the possibility of an electric fire. These are all good reasons to have your roof water damage repaired quickly after a flood or any other unexpected damage.

HVAC Water Damage

Your home can suffer structural damage if your HVAC system fails or faulty equipment is put in place. Your business and your home at risk by not having HVAC. It can lead to serious health issues.

Damage to Pipes from Water

Pipe water damage is usually caused due to a pipe burst within your home. When you’ve discovered that there’s been an issue, it is important for you to contact a professional to stop the leak and ensure it doesn’t cause structural damage.

A burst pipe can cause devastating damage. When your pipes break they can let water into your home, causing extensive damage and requiring water damage repair – which can cause structural damage.

Stop the water supply and call an expert IICRC-certified specialist from a company for water restoration like Critical Control as soon as you spot broken pipes or water damage.

How much does it cost to restore water damage?

Water damage restoration cost per square foot

Based on the square feet the water damage repair and cleanup costs differ. The following breakdown of pricing can be obtained at National Flood Services for each square foot

Is water damage covered by homeowner’s insurance?

The homeowner’s insurance policies are generally applicable if the source of the damage is sudden and not intentional. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement for a damaged window, but not when the damage was the result of negligence.

Neglect can be described as damage to a surface or an object that is caused by exposure, inadequate maintenance, or general wear and tear. According to the American-based Insurance Information Institute, homeowners insurance doesn’t cover damage caused by negligence.

If the damage to your property resulted from an event that is a flood, it would not be covered by homeowner’s insurance. The flood insurance policy is mandatory. Mortgage lenders may require flood insurance in specific areas. Flooding can occur due to storms, flooding the ground or overflowing bodies of water or the overflowing or surge of bodies like rivers, lakes, streams and oceans.