Water damage restoration service – Temelec

Property owners in Temelec experience burst pipe damage regularly. Whether you’ve been affected by a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

When a flood, storm, or burst pipe causes water to enter a house or structure water damage can occur more often than not. Sometimes, the damage is obvious and obvious, sometimes it’s hidden or minor.

Remediation of water damage is more complex than just drying the interior. With modern professional methods for water damage restoration Restoration companies like Critical Control can mitigate damage which, in the past, would have required total reconstruction of the structure, or in the sense of demolish and rebuild.

Water Damage Restoration Guidelines are available – Call an Professional

Many times, homeowners and builders attempt to repair water damage using DIY solutions located on the internet. This isn’t a good idea. There are guidelines to deal with water damage , and they call on the tools and skills of experts. These guidelines are found in the IICRC Standard Reference Guide, or Professional Water Damage Restoration book. This guide is created because of the necessity for professional standardisation of situations that involve water destruction to buildings and homes and the risks they pose.

The IICRC guidelines assist restoration experts like Critical Control to evaluate the kind and severity of the damages on every project.

There are really important reasons that water damage professionals need to follow these guidelines. There are situations that warrant us to bring in the services of an Indoor Environmental Professional (IEP). An IEP is a person who has the skills and experience to analyze the condition of a place collect samples, perform lab tests and give us advice on the type of water damage.

This is particularly important in situations where the building’s residents are at risk or have concerns regarding contamination.

Water damage through categories and classes


Projects for water damage restoration can be classified into two types, depending on how extensive the infiltration of water is.

The water that enters the structure was classified according to the degree of contamination. The first category is water that comes from a clean source such as a tub or sink or burst water supply.

Category 2 water contains high levels of contaminants and could cause illness if it is consumed or in contact with. This can include sources which may not normally seem like an issue, like the discharges from washing machines, or toilet overflows.

Category 3 water is grossly polluted, meaning it could contain toxic, pathogenic or any other harmful agent within it. Most often, this is due to contamination from sewage, toilet backflows after the toilet trap or a flood of seawater from rivers and streams or any other water arising from the exterior of the building. This water can contain pesticides, heavy metallics or harmful substances.


You can also utilize the IICRC’s courses to determine how much water has penetrated your property. This is basically setting guidelines for the level of saturation of the building or home.

Class 1 is the smallest amount of water and absorption. It is the case the case when water comes in contact with less than 5% building substances which absorb water. This is because the majority of substances that are affected by water don’t retain or absorb water. Examples include concrete, coated or finished wood, masonry or plaster.

Class 2 is a term used to describe water absorption and intrusion. It means that anywhere between 5% and 40% of the combined floor, ceiling and wall is constructed from low-evaporation substances like wood, concrete, plaster or bricks and mortar.

The porous materials, such as carpet, insulation , and fiberboard that comprise Class 3 comprise around 40 percent of the floor, wall and ceiling materials, with about 40% in class 3. Other materials such as concrete and plaster that do not absorb water haven’t been adversely affected.

Class 4 indicates that water has become deeply bound in materials that do not easily absorb water like wood, plaster, concrete and the masonry. This requires special drying techniques and longer drying times.

How to Dry a Water damaged Building or House


Three ways to remove water from buildings include physical extraction, dehumidification and evaporation. Eliminating water from liquids is at most 500 times more efficient than dehumidifiers and air movers. The faster the structure can dry, the more efficient. The quantity of materials to be extracted will influence both dehumidification and extraction techniques.

Water damage professionals use an array of extraction techniques. We make use of a variety of equipment, such as self-propelled and subsurface extraction tools.

Forced Evaporation

The remaining moisture is dried using high-speed air movers once as much water as possible has been taken away.

A submerged object absorbs moisture and water when it’s wet. The object is then damp or wet as a result.

The degree of saturation is referred to as the point where it becomes impossible to contain any more moisture. More humid means that the air is closer to saturation.

The evaporation phase is the moment when water molecules shift from the state of liquid to a gaseous state. This is called evaporation.

This signifies that the object no longer absorbs moisture from the air. This is known as the saturation point. the point at which evaporation begins. When saturation is attained, the drying process begins.

High-efficiency airmovers dry the object on both sides during the evaporation phase. They produce a powerful airflow across the entire surface, that is controlled through a filter system that is able to cover the entire area of the object.

An air mover can transport between 10 and 20 percent more air than an ordinary fan, or even a regular fan in your home.

The item is dried using air movers approximately 10 times faster than natural conditions in which no air mover was employed.

The high-speed airflow dry the surface and sucks up the moisture drawn away by the air movers.

Make use of heat to help in the drying process.

The element of heat is crucial to the success of any restoration project. To dry out materials damaged by water, we use a number of different types of heaters.

Electric Heaters: These heaters may be used to dry jobs which require multiple sources of heat. This is due to the fact that they are available in several different power levels, which allows you to use multiple heaters at the same time.

You can also reduce or off electric heat as the work is completed, but without impacting other heaters. In order to maximize efficiency and lower your expenses for energy, you can adjust the wattage of one heater, while also increasing its wattage.

Electric heaters are a common feature in restoration work because they produce essentially zero emissions and consume very little water. The only downside is that they take longer time to get hot, which requires more time for the drying process in general.

Hydronic Bioler (TES): They are also extremely efficient in heating up quickly yet releasing minimal emissions. They typically operate on natural gas or propane.

Hydronic boilers differ from electric heating in the sense that they don’t use forced-air to distribute heat, so it can be challenging to evenly heat an space with these kinds of heaters. They also operate at an lower temperature, making them perfect for drying tasks which require ceilings and walls to be left unattended.

Hydronic boilers are often used when there is no electrical power to power electric heaters. They are capable of producing radiant heat and keep your drying area warm without the requirement of an electrical source.


To dry houses and buildings that are damaged due to water damage, we use Low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can draw 170 pints of water from damp structures that have experienced extensive water damage within 24 hours.

The dehumidifier in your home can remove water from the air the same way it does an LGR Refrigerant Dehumidifier. It can eliminate the 99 percent or more of the mold spores that are airborne through the elimination of condensation.

Repairing Wood Floor Water Damage

It is crucial to get rid of water damaged hardwood floors so that repairs can be made from the subflooring up.

The subflooring must be taken off and repaired before. The hardwood floors affected need to be sanded or replaced. After these repairs are completed, the entire floor should be sanded, refinished and polished to ensure a uniform appearance.

Water Damage to Carpeting

If you have experienced a flood in your home this can be a stressful and costly experience. It is possible that you will need to replace your flooring even if you’ve eliminated the water from the area as soon as is possible.

It’s a huge shock to discover that your home isn’t in top condition after spending so much time and money to repair it.

In this regard, it is essential to evaluate the severity of the damages as soon as you can. The first step is to determine if the damaged part requires replacement. It is possible to wash the carpet, then use it after drying. This can eliminate worries about mildew growth or lingering odors.

Salvaging Carpet After a Water Damage Event

There could be staining on your carpeting , especially if the damage from water was severe. In some cases, the only way to eliminate these stains is to change the flooring. Another factor that could cause you to think of replacing your carpeting is a persistent and strong smell. If you find this to be the case then you may need to replace both your carpet and padding.

Then, consider if your floor can be dried professionally before deciding whether you want to replace it. A professional company can assist you in determining how severe the damages were. Our firm will examine the carpet and decide whether it is best to replace it or repairable. Remember that some methods employed for drying may harm the carpet further when it is already in bad condition.

Some of the considerations that will determine whether or not the carpet and padding need to be replaced are:

Do your carpets need to be dried, cleaned and disinfected professionally?

The carpet’s ability to stay clean is affected when the padding beneath it has been damaged. Even though your carpet is dried fast, the growth of mildew is still possible in the padding beneath if it is not dried.

The best way to be sure that your carpet is cleaned and disinfected following a flood is to hire an expert carpet cleaning service. Once the company has completed their task, you’ll be able to make a more informed decision about the condition of your carpet and decide whether or not to replace it.

Drywall that has been damaged by water

The severity of the damage determines the type and method of drywall repair. Repairing water damage may be as simple as removing a portion of drywall and then cleaning the affected area and replacing it.

On the other hand of the coin, serious damages could necessitate a total reconstruction of the wall, which could include the wall studs as well as fiberglass insulation.

The spores of mold can be seen in damaged drywall, which is difficult to remove. Therefore, in the majority of cases the drywall needs to be replaced. We use moisture testing equipment that allow us to determine how large and where the moisture has become. This allows us to identify areas of damage and keep costs restricted to the areas that are damaged in a way that is necessary.

Water also causes structural damage because it causes the wood to expand and contract. Once the wood is moistened with water, it’s a lot easier to break. The wood can get brittle if kept in the water for too long.


This problem can be avoided by building owners and homeowners taking immediate action to fix the structural damage caused by moisture-related problems with their property following flooding or other water-related damage.

Foundation Water Damage

The damage caused by water to a house’s foundation can happen due to a number of reasons. While not all issues with water result in structural damage, it’s essential to fix foundational issues in the quickest time possible to prevent structural damage.

The water damage from foundations can cause a variety of problems depending on how it is dealt with. It could cause serious structural damage if the issue isn’t addressed promptly.


Roof Water Damage

As with foundation water damage roof water damage is also quite common following natural catastrophes. Roof damage could cause roof leaks, and can also cause damage to the foundation of a house or the foundation of a home.

Roof leaks can be very costly and can have significant disadvantages. A leak on the roof can cause mold and mildew to develop, which could cause death. A roof that is leaky could affect the roof truss structure and cause structural damage to the roof.

If you don’t fix the leaks in your ceiling promptly the risk is that the rafters to decay and then soften. Water damage to the roof could result from electrical faults which could lead to the possibility of an electric fire. There are many reasons to have roof water damage dealt with quickly after a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system begins to fail or brand new equipment becomes defective, it could cause the structure of your house. You are putting your business and home at risk because you do not have HVAC. It can lead to serious health problems.

Damage to the Pipe Water

Pipe water damage is usually caused due to a pipe burst within your home. Once you have determined that there has been leak, it’s crucial to get professional help to stop the leak and ensure it doesn’t lead to structural damage.

The burst of pipes can cause amount of damage. The water can get into your home via broken pipes, which can cause severe damage. It could cause structural damage.

If you spot damaged water pipes, shut off the supply of water.

What’s the price to restore the damage caused by water?

Water damage restoration cost per square foot

Depending on the square foot the water damage repairs and cleanup expenses can vary. National Flood Services has the following breakdown of pricing for each square foot:

Is water damage covered by homeowner’s insurance?

Insurance policies for homeowners are typically applicable if the source of the damage is unexpected and accidental. The Insurance Information Institute states that homeowners insurance may cover the repair or replacement of broken windows but not for damages caused by negligence.

Damage caused by neglect can be defined as wear and tear to a surface or object because of exposure, lack of preventative maintenance, or general degradation. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance will not cover damages caused by negligence.

A homeowner’s policy does not cover water damage caused by flooding. A flood policy is required. In some regions where flood insurance is required, it’s usually by mortgage lenders. Flooding can be caused by storms, flooding ground or overflowing bodies of water or overflowing or surging bodies like streams, rivers, lakes and oceans.