Water damage remediation – Thompson

Property owners in Thompson get hit with burst pipe damage on a regular basis. Whether you’ve suffered from a natural disaster or a localized catastrophe such as a ruptured pipe, Critical Control is standing by to respond 24/7.

Water damage is more common when water enters a building or house by way of a flood, storm or burst pipe. Sometimes, the damage is obvious and obvious. In other instances, it’s hidden or not reported.

The process of repairing water damage is more complex than just drying the interior. Modern techniques for water damage remediation Restoration companies like Critical Control can mitigate damage which, in the past, would have required total structural replacement, in other words, demolish and rebuild.

Water Damage Restoration Guidelines are available – Call an Professional

Many times, building or home owners attempt to address water damage with DIY solutions available on the internet. This is a bad idea. Water damage can be managed according to established guidelines. These guidelines call for the knowledge and skills of professionals. These guidelines are detailed in what is known as IICRC Standard Reference Guide or Professional Water Damage Restoration publication. This guideline is essential to ensure that there is a professional standardisation for situations involving water damage to houses or buildings, and the risks associated with it.

The IICRC guidelines assist restoration experts such as Critical Control to evaluate the category and class of damage on each project.

There are really important reasons why professionals dealing with water damage must follow these guidelines. There are instances that require us to bring in an Indoor Environmental Professional (IEP). An IEP is an individual who has the skills and experience to analyze an area for contamination and take samples, conduct lab tests and provide us with advice regarding the type of water damage.

This is especially important in situations where the occupants of the building could be at risk, there is a likelihood of adverse health consequences, or the occupants express a need to identify the suspected contaminants or any other reason that there might be concerns about contamination.

Water damages caused through categories and classes


Projects for water damage restoration are divided into two categories, depending on how extensive the water infiltration is.

The water entering the structure was classified based on its contamination. Category 1 is water that is clean, such as a tub or sink or burst water supply.

The category 2 water contains significant amounts of contaminants, and could be able to cause discomfort of illness when inhaled or consumed. These include sources that might not appear to be a threat such as discharges from washing machines, or toilet overflows.

Water in Category 3 can be considered highly contaminated. It could contain toxic, pathogenic, or any other hazardous substances. Usually this means contamination by the backflow of toilets from the trap for toilets, seawater, water flooding from streams and rivers, or any other water arising from the building exterior. This water can be contaminated by pesticides, heavy metals or other toxic substances.


We can also use the IICRC’s classes to determine how much water has entered your property. The system is basically a set of guidelines for the saturation of the building or home.

The lowest level of water absorption and the greatest amount of water is categorized as Class 1. This is when water is in contact with less than 5% of construction materials that absorb water. This is because the majority of substances that are affected by water don’t hold or absorb water. Concrete, finished/coated wood, masonry or plaster.

Class 2 refers to water absorption and intrusion. It is approximately 10% up to 40% of the total floor, wall and ceiling comprised of low-evaporation materials such as plaster, concrete, wood or masonry.

Class 3 is the term used to describe 40 percent or more of floor, wall, and ceiling materials are porous materials like carpet, insulation, fiberboard etc. and also where other materials that do not absorb water like concrete or plaster haven’t been adversely affected.

Water has been absorbed into substances like concrete or plaster and wood, which are classified as Class 4. This calls for special drying techniques and longer drying times.

How to Dry a Water Damaged House or Building


Three methods for removing water from buildings include physical extraction, dehumidification, and the process of evaporation. Eliminating liquid water is at most 500 times more effective than dehumidifiers and air movers. The quicker the structure dries the more efficient. The quantity of material that needs to be extracted will affect the extraction process as well as dehumidification methods.

Professionals dealing with water damage employ different extraction techniques. Our tools include tools for subsurface extraction, wands as well as self-propelled tools and vacuum squeezers.

Forcible Evaporation

The remaining moisture is dried using high-speed air movers once the maximum amount of water has been taken away.

When an object gets wet or submerged in water it absorbs a portion of the moisture or water. The result is that the material gets dampened or wet.

Saturation is the time at which it becomes impractical for the air to contain any moisture. Higher humidity means that the air is getting closer to saturation.

In the evaporation process, water molecules jump from liquid state to gaseous state. The process is referred to as evaporation.

This signifies that the object is no longer able to absorb moisture from the atmosphere. This is called the saturation point. Once saturation is reached the drying process starts.

High-efficiency airmovers dry the object on both sides in the evaporation phase. They create strong airflow which is controlled by a filtering system.

Air mover is able to move between 10 and 20% more air than a fan, or even a regular fan used in the home.

The object is dried using airmovers about 10 times faster that in natural conditions in which no air mover was used.

A high-velocity airflow dries the surface and draws in the moisture that has been drawn away by the air mover.

Utilizing Heat to Aid the Drying Process

The most important element for any water damage restoration work is the use of heat. To dry out the materials that have been affected by water, we make use of a number of different types of heaters.

Electric Heaters: Electric heaters are great to dry jobs that require multiple heat sources. It is possible to run several heaters simultaneously due to their many Wattages.

Electric heat can also be able to be turned down or off when the work is in process, without affecting your other heaters. This means you can turn one heater down while raising the wattage of the other to increase efficiency, and decrease your energy costs.

Electric heaters are a common feature in restoration work since they emit virtually no emissions and use minimal amounts of water. The only issue is that they take longer time to heat up, requiring more time for the drying process overall.

Hydronic Bioler (TES),: The boilers quickly heat up and emit very little carbon dioxide. They can run on propane or natural gas.

Hydronic boilers differ from electric heat since they don’t utilize forced air heat to spread heat. This makes it difficult to heat large areas evenly using these heaters. They are also able to dry jobs that do not require walls or ceilings to remain in their place.

If electric heaters are not utilized, hydronic boilers can often be used. They can produce radiant heat and can keep your drying area warm without the need of an electrical source.


To keep buildings and homes dry which have suffered damage due to flooding, we make use of low Grain Refrigerant (LGR) Dehumidifiers.

The LGR Home Dehumidifier can remove 170 pints water from a damp building that is severely damaged by water damage each all day, every hour of the day.

In addition to extracting water from the air such as an LGR Refrigerant Dehumidifier does it, the dehumidifier for your home will also eliminate up to 99percent of mold spores that are airborne in the air through the elimination of condensation.

Repairing Hardwood Floor Water Damage

Hardwood floors damaged by water have to be ripped up so repairs can occur starting from the subflooring up.

The subflooring must be taken off and repaired before. After that, the hardwood flooring affected need to be replaced or sanded. To ensure a uniform appearance flooring, all floors should be sanded down and refinished after these repairs are completed.

Carpets are prone to water damage

If you’ve had the misfortune of experiencing a flood in your home this can be a stressful and expensive experience. Even if the water has been removed from the affected area immediately, there is an opportunity that you’ll have to replace the flooring in the future.

After spending time and money to restore your home to its pre-flood condition, it would be depressing to discover that the finished results leave some things to be desired.

It is vital to identify the extent of damage as soon as you can. One of the initial issues to address is whether the damaged area needs to be replaced. There is a way to clean the carpet and use it after drying. This will eliminate any concerns about mildew growth or persistent smells.

Salvaging Carpet After a Water Damage Event

If the damage from water is severe, it is possible that you’ll notice staining on your carpet. There are times when you have to replace your flooring in order to eliminate these stains. A strong, lingering odor can also be an indication to change your carpet. If it is it is likely that you’ll have to replace your padding and carpet.

The next step to determine whether or not you need to replace your carpeting is to assess if the floor can be cleaned and dried professionally. If you can have a reputable company perform the cleaning, you’ll have a better idea of how severe the water damage was. We can determine if your carpet should be replaced or can be saved. If your carpet is damaged, a few drying methods can cause further damage to it.

Many factors determine the need for padding or carpet is a good idea to replace it.

Are your carpets dry, cleaned and disinfected professionally?

If the padding underneath your carpet has been damaged, this can affect how long the carpet can last. Although your carpet has been dried quickly, mildew growth may still be present when the padding beneath isn’t dried.

The most secure way to make sure that your carpet is restored and disinfected after a flood is to hire a professional carpet cleaning company. After the company completes their work, you will be able to make a more informed decision about the state of your carpeting and decide whether or not you need to replace it.

Drywall that has been damaged by water

The extent of damage determines the type and way to repair drywall. Repairing water damage can be as easy as removing the drywall section cleaning it, after that, replacing it.

The opposite of this is that major damage could require whole-wall replacement including fiberglass insulation and wall studs.

There are spores of mold in drywall damaged by water that is hard to get rid of. Most of the time the drywall will need to be replaced. We employ moisture testing tools which allow us to identify how large and where the water has grown. This allows us to identify damaged areas and limit the cost to the only damaged ones.

Water also causes structural damage, as it causes the wood to expand and expand and contract. Once the wood is moistened by water, it becomes much more difficult to break. The wood can get brittle if allowed to dry in water for too long.


This problem can be avoided by building owners and homeowners immediately taking action to repair structural damage from moisture-related problems with their property following flooding or other water-related damage.

Water Damage in the Foundation

There are a variety of reasons that water damage can affect the foundation of a house. Although not all water issues result in structural damage, it’s essential to fix foundational issues as quickly as possible to avoid potential structural damage.

Foundation water damage can cause a number of different issues dependent on the way it is handled. If the problem isn’t addressed promptly, it could cause serious structural damage.


Roof Water Damage

As with foundation water damage roof water damage is also quite common following natural catastrophes. Along with causing roof leaks, roof damage can also result in issues with the walls and foundation of a home or construction.

Roof leaks can be costly and can have serious drawbacks. The roof’s leaks could result in the growth of mold that could be fatal. Leaks in the roof may also result in damages to the roof truss.

If you don’t fix leaks in your ceiling right away, they can cause your rafters to degrade and become soft. Electrical faults are also prevalent in roof water damage, which could cause the possibility of an electrical fire. These are all good reasons to get roof water damage taken care of quickly after a flood or other type of unexpected damage.

HVAC Water Damage

If your HVAC system is failing or brand-new equipment is found to be inoperable, it can result in the structure of your house. You are putting your home and business at risk by not having HVAC. The growth of mold can cause serious health problems.

Damage to the Pipe Water

Damage to pipes typically caused by a burst pipe within your home. Once you’ve determined there’s a leak, it is important to call a professional to stop the water from damaging the structure.

Burst pipes can cause a number of damages. When your pipes break, water may enter your home, causing severe damages and necessitating repair of water damage. This is a process that can result in structural damage.

When you see water damage to your pipe that is not repaired, shut off the water supply.

What’s the cost for restoring water damages?

Water damage restoration cost per square foot

Cleaning and repair costs can vary based on the square footage you have. The following pricing breakdown is available at National Flood Services for each square foot

Will Water Damage Be Covered By the Homeowner’s Insurance?

Insurance policies for homeowners are typically appropriate if the damage is sudden and unintentional. According to the Insurance Information Institute, homeowners insurance policies can cover repair or replacement for a broken window, but not when the damage was the result of neglect.

Neglect can be described as damage to an object or surface that results from exposure, inadequate maintenance, or general deterioration. According to the Insurance Information Institute, a US-based Insurance Information Institute, homeowners insurance does not cover damage from neglect.

If the water damage is the result of a flood, the event is not covered under homeowner’s insurance. Flood insurance is mandatory. In certain areas, flood policies are required by mortgage lenders. Flooding can occur because of flooding, over-saturated ground, and surging or overflowing bodies water like rivers, ponds, lakes, streams, oceans in combination with high winds.